Some of your duties will include:

·        Respond to emergencies that could cause injury to personnel or loss of production.

·        Monitor and reviews cost, establishes and maintain budgets and recommends the replacement or updating of equipment

·        Develop and evaluate plans and criteria for a variety of projects and activities and devise new approaches to problems encountered.

·        Plan and conduct surveys, tests or investigations, interpret results, and prepare recommendations, summaries, schedules, and cost estimates. Meet with representatives of other departments to coordinate planning and scheduling activities.

·        Oversee new installations, including modifications and new installation, start – up /commissioning.

·        Reviews maintenance schedules and coordinates with other departments to ensure optimal equipment and plant availabilities to meet business also that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Responsible for supervising all Electrical Instrument & Process control maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections, prepare STP’s (standard task procedures) and ensure that JHA`s (job hazard analysis) are performed prior to commencement of all tasks.

·        Directly supervises the Senior Supervisor, Supervisor, instrumentation, engineer process control and foreman shift on call, also coordinate activities between his/her foreman with the planning department to ensure that scheduled maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

Ensure and maintain all material storage areas to comply with company policies

Some of your duties will include:

·        Provide maintenance engineering & reliability engineering service within process maintenance department

·        Monitor departmental results, identify opportunities for improvement & work closely with frontline staff to initiate changes.

·        Manage the Change Management process to ensure compliance, provide engineering input to the process, prioritize & coordinate resultant projects Review and critique work of others in the department for technical correctness (QA/QC).

·        Facilitate Root Cause Analysis (RCA) of major failure/downtime events & follow up close out of corrective actions.

·        Develops maintenance personnel to perform equipment trouble shooting.

·        Compile failure data, carry out FME analysis to provide input to planning for adjustment of PM/PdM frequency and spare parts analysis.

·        Develop & manage departmental standards

·        Act as a QA/QC resource when required

·        Identify opportunity, initiate & monitor trials of alternative parts where feasible

·        Oversee new installations, including design, modification & commissioning (baseline measurement)

·        Ensures that all work is properly documented, filed and recorded for future reference

·        Assist Superintendent Resource Management to provide data interpretation & recommendations

Some of your duties will include:

·        Responsible to organize and schedule all necessary resources required to accomplish all phases of maintenance activities.

·        To organizes and schedules all necessary resources required to accomplish maintenance activities.

·        To ensures that equipment and material are available when required.

·        To ensures that necessary work history and documentation are properly organized and input into the computer history files.

• Organizes and schedules all necessary resources required to accomplish maintenance activities.
• Prepare and issue daily work schedules.
• Prepares detailed critical path plans and job cards, including equipment and materials lists for major jobs such as planned shutdowns.
• Ensures that equipment and material are available when required.
• Issues and follows up on preventative maintenance inspections and procedures.
• Ensures that necessary work history and documentation are properly organized and input into the computer history files.
• Coordinates regularly scheduled meetings with Maintenance and Operations representatives.
• Prepares weekly summary and exception reports; prepares long-term plans and schedules for review and approval.
• Prepares purchase requisitions and warehouse issue tickets.

Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

- Membuat Rencana Pemasaran

- Melakukan Prospek ke Calon Nasabah

- Melakukan Seleksi Awal, Kunjungan ke Lokasi Usaha, Jaminan,  dan Lokasi Tempat Tinggal

- Analisa Permohonan Pembiayaan

- Melakukan Monitoring Pembiayaan Paska Cair

- Melakukan Penagihan Atas Tunggakan Kepada Nasabah

• Menawarkan Produk Elektron kepada pelangggan
• Merawat dan menjaga kebersihan display yang ada di toko
• Bersedia bekerja dengan target yang telah ditentukan
• Melayani & menjawab pertanyaan pelanggan dengan baik

• Menawarkan Produk Elektron kepada pelangggan
• Merawat dan menjaga kebersihan display yang ada di toko
• Bersedia bekerja dengan target yang telah ditentukan
• Melayani & menjawab pertanyaan pelanggan dengan baik

• Menawarkan Produk Elektron kepada pelangggan
• Merawat dan menjaga kebersihan display yang ada di toko
• Bersedia bekerja dengan target yang telah ditentukan
• Melayani & menjawab pertanyaan pelanggan dengan baik

-Menarik perhatian calon pelanggan

-Memberikan informasi mengenai produk, seperti fitur, keunggulan, harga, promosi, dan cara penggunaan

-Mengajak pelanggan untuk mencoba produk

-Menjaga penampilan sesuai standar perusahaan

-Berpartisipasi dalam pelatihan untuk meningkatkan pengetahuan produk dan keterampilan promosi

Penyusunan Laporan Keuangan: Membantu dalam menyusun laporan keuangan bulanan, triwulanan, atau tahunan, seperti laporan laba rugi, neraca, dan laporan arus kas.

Pencatatan Transaksi Keuangan: Melakukan pencatatan dan pengklasifikasian transaksi keuangan perusahaan secara akurat dan tepat waktu.

Rekonsiliasi Bank: Memastikan kecocokan antara catatan kas perusahaan dan laporan bank melalui proses rekonsiliasi.

Pengelolaan Pajak: Membantu dalam perhitungan dan pelaporan pajak (misalnya PPN, PPh) untuk memastikan kepatuhan terhadap regulasi perpajakan.

Pengelolaan Kas dan Pembayaran: Mengelola aliran kas, termasuk pembayaran utang dan piutang perusahaan, serta memastikan pembayaran dilakukan tepat waktu.

Analisis Keuangan: Melakukan analisis terhadap laporan keuangan untuk membantu manajemen dalam pengambilan keputusan keuangan.

Audit Internal: Membantu dalam proses audit internal untuk memastikan bahwa laporan dan transaksi keuangan sesuai dengan kebijakan perusahaan.

SEGERA DAFTARKAN DIRI KAMU

Memeriksa Laporan Keuangan: Mengevaluasi laporan keuangan untuk memastikan akurasi dan kepatuhan terhadap standar akuntansi.

Melakukan Uji Kepatuhan: Memverifikasi bahwa perusahaan mematuhi kebijakan, prosedur, dan peraturan yang berlaku.

Mengumpulkan dan Menganalisis Data: Mengumpulkan bukti audit, menganalisis transaksi, dan mencatat temuan.

Menyusun Laporan Audit: Membantu menyusun laporan audit yang mencatat hasil temuan dan rekomendasi perbaikan.

Bekerja Sama dengan Tim: Berkoordinasi dengan anggota tim audit senior dan departemen lain dalam melakukan audit.

Mengidentifikasi Risiko: Mendeteksi potensi risiko atau ketidaksesuaian dalam laporan dan proses keuangan.

MOHON PERHATIAN UNTUK PEKERJAAN BISA DI KERJAKAN SECARA FREELANCE

Manajemen Produk: Mengelola dan memperbarui daftar produk di platform marketplace, termasuk deskripsi, harga, foto, dan stok.

Pemrosesan Pesanan: Memastikan pesanan pelanggan diproses dengan tepat, mulai dari konfirmasi hingga pengiriman.

Layanan Pelanggan: Menangani pertanyaan, keluhan, atau masalah pelanggan melalui chat, email, atau telepon.

Pengelolaan Transaksi: Memantau dan memastikan pembayaran diterima serta mengatasi masalah terkait transaksi.

Analisis dan Laporan Penjualan: Membantu dalam menganalisis data penjualan dan membuat laporan berkala terkait performa toko di marketplace.

Promosi dan Iklan: Membantu dalam mengatur kampanye promosi atau iklan untuk meningkatkan visibilitas produk.

Membantu Executive Chef dalam mengawasi tim dapur dan operasional harian. Menjaga kebersihan area kerja dan mematuhi standar keamanan pangan. Berkoordinasi dengan tim untuk memastikan efisiensi dan kelancaran produksi

Kualifikasi

-Pendidikan min SMA Sederajat

-Pengalaman kerja min 1 tahun

-Rajin dan Ulet

-bisa Editor Vidio, Kameramen, Sosial Media Management)

• Melakukan penawaran pencairan dana tunai melalui telepon
• Menjelaskan produk atau layanan kepada pelanggan
• Menjawab pertanyaan dan panggilan pelanggan
• Melakukan follow up kepada pelanggan
• Mengumpulkan dan mengelola database pelanggan

• Menjalin hubungan yang baik dan kerjasama dengan brand atau seller
• Membuat database
• Scounting Klien
• Membuat Deck
• Melakukan Pitching
• Membuat strategi penjualan yang menarik serta pekerjaan pekerjaan lain yang berkaitan dengan penjualan

Requirements :

• Min S1 Sistem Informasi / Teknologi Informasi / MIPA
• Experience min 1 year/ Fresh Graduate
• Good Interpersonal and Communication Skill
• Able to Web Development dengan ASP.NET / .NET Core, Database SQL,
• Analisa masalah, Bug Fix, Troubleshooting, UX/IX
• Able to Work Under Pressure

• Menawarkan Produk Elektron kepada pelangggan
• Merawat dan menjaga kebersihan display yang ada di toko
• Bersedia bekerja dengan target yang telah ditentukan
• Melayani & menjawab pertanyaan pelanggan dengan baik

• Menawarkan Produk Elektron kepada pelangggan
• Merawat dan menjaga kebersihan display yang ada di toko
• Bersedia bekerja dengan target yang telah ditentukan
• Melayani & menjawab pertanyaan pelanggan dengan baik

Credit Marketing Officer

• - Membina hubungan baik dengan pihak rekanan
• - Melakukan perhitungan kredit pada formulir pembiayaan
• - Melakukan survey kepada calon customer dan memeriksa dokumen kredit
• - Memantau dan melaporkan perkembangan, kebutuhan dan kompetisi pasar
• - Melakukan monitor status aplikasi harian

Keterampilan Manajerial:

• Kemampuan untuk memimpin dan mengelola tim IT yang beragam.
• Pengalaman dalam perencanaan anggaran dan pengelolaan sumber daya yang efisien.
• Keterampilan komunikasi yang baik untuk berinteraksi dengan pemangku kepentingan bisnis dan tim teknis.
• Kemampuan untuk menganalisis masalah teknis dan membuat keputusan yang tepat.

Keterampilan Bisnis:

• Memahami kebutuhan bisnis dan menghubungkannya dengan solusi teknologi yang tepat.
• Kemampuan untuk menyusun strategi IT yang align dengan tujuan bisnis perusahaan.
• Pengalaman dalam negosiasi kontrak dengan vendor teknologi dan pihak ketiga.

AMARYLLIS CAFE & RESTAURANT X FAVEHOTEL KELAPA GADING JAKARTA IS HIRING

Requirements:

- Experienced in the same field for min. 1 year

- Good Communication Skill

- Good attitude, able to work in a team

Send us your CV to [email protected]

• Menawarkan Produk Elektron kepada pelangggan
• Merawat dan menjaga kebersihan display yang ada di toko
• Bersedia bekerja dengan target yang telah ditentukan
• Melayani & menjawab pertanyaan pelanggan dengan baik

-Menyajikan minuman

-Menyiapkan peralatan meracik kopi,

-Menerima pesanan,

-Meracik kopi

-Melakukan mobile

-Mampu bekerja target

-Bersedia bekerja di hari libur

Bertanggung jawab untuk mengelola jadwal, komunikasi, perjalanan, tugas administratif, dan kebutuhan pribadi Management, dengan tujuan untuk memaksimalkan efisiensi dan mendukung kelancaran kegiatan profesional maupun pribadi mereka.