• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Familiar with the International code and standard such as IEC, IEEE, ANSI, NEC, NEMA

• Well known electrical basic philosophy in design (Construction design)

• Familiar with Electrical design drawing software such as 2D Auto Cad, 3D model (SP3D, PDS, PDMS)

• Familiar to use general Microsoft Word & office

• Strong mind with schedule and design quality

• Experience in using Revit Software is preferable
• Experience in using AutoCAD

bekerja di quality control

• Experience in preparing steel structure drawing in EPC Project
• Capable to provide 3D Model using SP3D, AP3D and Tekla
• Experience in using AutoCAD

• Experience in preparing Drainage Drawing and details and/or foundation drawing in EPC Project.
• Capable to provide 3D Model using SP3D and AP3D.
• Experience in using AutoCAD.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Some of your duties will include:

·        Serve as the go-to expert for HRIS-related queries

·        Prepare ad-hoc reports as needed for management and other stakeholders; Collaborates with internal and / or external stakeholders to understand business and HR requirements and develops routine and ad-hoc reports and dashboards in line with these requirements.

·        Compiles, sorts, and organizes data in preparation for subsequent analysis HR Data to generate reports

·        Identifies and resolves any data quality issues by conducting both routine and ad-hoc data cleaning and testing

·        Uses a range of business intelligence and data analysis tools to provide analysis and reports within a comparatively structured reporting framework

·        Applies statistical and / or data visualization techniques

·        Prepares and presents interpretation of findings to internal and / or external clients.

·        Provide technical support and assist end users with SuccessFactors queries, such as forgotten passwords, leave requests, benefits approvals, etc.

·        Work closely with HR other functions (Payroll, Salary Benefit, Recruitment, IR) to ensure data employees are well maintained, especially during payroll preparation.

·        Maintain and update employee records, ensuring data accuracy and integrity

Responsibilities:

-       Able to handle full set report in accounting (AP, AR, Bank, GL, Inventory)

-       Understand Indonesia taxes regulation (Income Tax)

-       Able to operate tax system e-spt is a plus

-       Able  to prepare cash flow and cash forecast

-       Understand Bank Indonesia reports

-       Having high anthusiasm for learning

-       Able to work in team

• Experience 5 years in EPC Project as Building Mechanical, Electrical, Plumbing (MEP) Designer/Drafter.
• Experience in using Revit Software is preferable.
• Experience in using AutoCAD.

·        Handle benefits enrollments, changes, and terminations accurately and promptly to the Insurance provider and BPJS Kesehatan.

·        Assist employees with benefits-related issues and questions, providing excellent customer service

·        Manage and process claims and invoices and resolve administrative problems with insurance providers.

·        Conduct presentations, enrollments, and educational sessions to inform employees about their benefits.

·        Evaluate benefits plans, programs, and policies to recommend changes and improvements.

·        Perform regular audits of benefits data to ensure accuracy and compliance

·        Ensure that all benefits programs comply with legal requirements.

Some of your duties will include:

·        Monitor, control and coordinate related clinic operational related consumable and administration

·        Avoid delays in the review and approval of invoices submitted by contractors

·        Ensure that processes and reports reflect actual on-site conditions

·        Oversee all processes related to medical service administration

·        Facilitate smooth administration of billing and payments, ensuring reliable reports.

·        Collect, validate, process, and store billing data provided by contractors for services and purchases, including cashless transactions, back charges, Engro, purchases, contracts, access cardax, quotations, and others

·        Prepare and distribute weekly/monthly reports on invoices and billing

Some of your duties will include:

·        Manage and protect the reputation of the company.

·        Understand the company's health benefits, insurance policies, and referral system.

·        Reading procedures, flow process, and guidelines, including regulations & best practices, to ensure that clinic operations & site health programs meet the qualities of the COMPANY expectations

·        Consistently meets or exceeds expectations for departmental standards related to Quality, Service Level, Call Goal, and other KPIs.

·        Liaise with other departments and sections, including external parties, e.g., hospitals and insurance companies, to ensure the proper site referral system.

·        Coordinate, supervise, monitor, and maintain ongoing tracking and appropriate documentation on all steps of the referral process.

·        Receive visiting employees/dependents and provide them with necessary assistance.

·        Discuss with the referral patient by email, telephone, WhatsApp, face-to-face, or other applicable recognized media by the company and provide information.

·        Provides information on the claim process, policy changes, benefits, and payment modes/methods

·        Maintain strong clientele relationships with employees and dependents.

·        Take calls from patients and in charge of offering necessary assistance to employees and dependents.

·        Analyze employees' and dependents' complaints, communicate, escalate, and communicate.

·        Record all conversations with patients, including details of inquiries or complaints (managing database) and action steps.

·        Recommending any necessary adjustments and changes in all business flow processes, including procedures & guideline

·        Keep accurate documentation, perform analysis (including maintaining the available database) & create a report for the medical advisor.

Assist health advisor/manager in monitoring the quality aspects of a site referral program.

Some of your duties will include:

·        Create new catalogue items as requested by user Department through series of assessment to determine stock classification, mnemonic, etc.

·        Change material master information based on review result with user area

·        Cleansing potential duplication of material master

·        Standardize material description and manufacture part number

Some of your duties will include:

·        Responsible for suggesting enhancements to policies and procedures in the event of reoccurring inventory accuracy within the warehouse group. This position also works in conjunction with internal and external audits groups during site review and compliance testing within warehouse areas. Compliance Analyst is also responsible to track the issuance, dispatch and incoming receipt of repairable components.

·        To conduct self-assessment audits to ensure individual warehouses are performing their duties in adherence to established policies and procedures.

·        To perform physical inventory cyclic stocktaking at all warehouse locations.

·        To monitor warehouse operations areas to ensure adherence to policies and procedures.

·        To audit document control within the warehouse data input area.

·        Performs physical cyclic stocktaking at all warehouses and lay down locations and investigates variances.

·        Prepare inventory adjustment sheets and forward though to immediate supervisor for review.

·        Prepares reports advising management of count discrepancies found by warehouse locations.

·        Performs audits and inspections in the data input area to ensure documentation is processed in an accurate and timely manner in accordance with policies and procedures.

·        Coordinates with Administration Coordinators to investigate and resolve negative stock-on-hand balances.

·        Performs physical inspection of Capitalized and Insurance items to ensure inventory is stored in an appropriate manner that protects its condition.

·        Checks material-in-transit reports to determine if inventory has been physically received but not yet acquitted.

·        Review warehouse non-action reports to monitor warehouse service level performance.

·        Recommends stock preservation to warehouse supervisors for items that require special storage requirements.

·        Coordinates with user departments to ensure that technical inspections are performed on repaired items prior to storage.

·        Control secure cyclic count records through centralized filing for all warehouse counts performed.

·        Other duties as assigned.

Some of your duties will include:

·        Responsible to ensure the flow of materials and supplies is received and issued in a safe and timely manner that contributes to high service level. This position also ensures safe and efficient warehouse operation for the area of responsibility.

·        To oversee and direct daily warehouse operational activities and functions including receipt, item checking, discrepancies, storage, bin location maintenance, parts preservation and issuing Company inventory.

·        To provide supervision and advice to warehouseman and subordinates in safe warehousing techniques, inventory storage methods and stock rotation to ensure inventory is controlled in an efficient manner.

·        Ensure that appropriate documentation and authorizations are correct for the receipt, issuance and shipment of materials and supplies.

·     Ensure that receiving operations are conducted in a timely manner and ensure discrepancy reports are processed when discrepancies exist.

·     Report the status of warehousing activities to Senior Specialist warehouse on a regular basis.

·     Monitor the warehouse non-action report to ensure warehouse acquittals have been processed in a timely manner.

·     Oversee roster schedules and shift rotations to ensure adequate manpower coverage to support continued operations.

·     Coordinate stock-outs of Critical spares to Inventory Control and Expediting sections.

·     Respond immediately to the emergency requirements of equipment breakdowns to support operational requirements.

·     Report to Senior Specialist Warehouse about stock that is unserviceable or damaged due to incorrect storage practices.

·     Other duties as assigned.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable to understand piping standard drawing
• Capable to understand piping layout
• Capable to operate 2D CAD / 3D Model
• 3D Modeling tools experience (S3D, AP3D), SPR & Navis operation.
• Middle experience knowledge and expertise in Piping Design-layout, 3D modeling, P-Info dwg, isometric, piping plan drawing, MTO sketch

- Provide technical support to end-users for hardware, software, and network issues.

- Diagnose and resolve technical problems both on-site and remotely.

- Maintain and update system documentation and hardware inventory.

- Install, configure, and troubleshoot operating systems and software applications.

- Manage user accounts, permissions, and access control.

- Provide technical support and troubleshooting for business applications

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.