Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

Responsible for overseeing all maintenance and repair activities within the Process Maintenance’s Central Workshop to support the smooth operation of the mineral processing plant. This role ensures the reliability, availability, and safety of mechanical equipment and tools, while also leading a team of technicians to achieve operational targets efficiently and in compliance with company policies and standards.

Workshop Operations Management:

·        Plan, organize, and supervise daily maintenance and repair tasks in the central workshop to support plant operations.

·        Ensure all work is completed on time, within budget, and to quality and safety standards.

·        Equipment Maintenance and Repair:

·        Oversee the maintenance and repair of critical plant equipment, such as crushers, conveyors, pumps, and other mechanical systems.

·        Conduct regular inspections and diagnostics to identify and address mechanical issues promptly.

Team Leadership and Development: Supervise a team of technicians, providing guidance, training, and performance evaluations; Foster a culture of safety, teamwork, and continuous improvement;

Safety and Compliance: Ensure adherence to health, safety, and environmental (HSE) regulations and company policies; Promote safe working practices within the workshop.

Resource Management:

·        Manage inventory of spare parts, tools, and consumables, ensuring availability for timely repairs.

·        Coordinate with procurement and vendors for quality and cost-effective parts supply.

Reporting and Documentation:

·        Maintain accurate records of maintenance activities, equipment history, and workshop performance metrics.

·        Generate regular reports for the Process Maintenance Manager.

Continuous Improvement:

·        Identify opportunities for improving maintenance processes and implementing best practices.

·        Collaborate with other departments to ensure the workshop’s activities align with plant operational goals.

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

Responsible for overseeing all maintenance and repair activities within the Process Maintenance’s Central Workshop to support the smooth operation of the mineral processing plant. This role ensures the reliability, availability, and safety of mechanical equipment and tools, while also leading a team of technicians to achieve operational targets efficiently and in compliance with company policies and standards.

Workshop Operations Management:

·        Plan, organize, and supervise daily maintenance and repair tasks in the central workshop to support plant operations.

·        Ensure all work is completed on time, within budget, and to quality and safety standards.

·        Equipment Maintenance and Repair:

·        Oversee the maintenance and repair of critical plant equipment, such as crushers, conveyors, pumps, and other mechanical systems.

·        Conduct regular inspections and diagnostics to identify and address mechanical issues promptly.

Team Leadership and Development: Supervise a team of technicians, providing guidance, training, and performance evaluations; Foster a culture of safety, teamwork, and continuous improvement;

Safety and Compliance: Ensure adherence to health, safety, and environmental (HSE) regulations and company policies; Promote safe working practices within the workshop.

Resource Management:

·        Manage inventory of spare parts, tools, and consumables, ensuring availability for timely repairs.

·        Coordinate with procurement and vendors for quality and cost-effective parts supply.

Reporting and Documentation:

·        Maintain accurate records of maintenance activities, equipment history, and workshop performance metrics.

·        Generate regular reports for the Process Maintenance Manager.

Continuous Improvement:

·        Identify opportunities for improving maintenance processes and implementing best practices.

·        Collaborate with other departments to ensure the workshop’s activities align with plant operational goals.

• Melakukan panggilan ke prospek untuk menawarkan produk/layanan McEasy.

• Menyampaikan informasi produk secara jelas dan menangani pertanyaan calon pelanggan.

• Melakukan follow-up panggilan dan memastikan prospek mendapatkan perhatian yang sesuai.

• Mengatasi keluhan pelanggan dengan solusi yang memadai dan koordinasi dengan tim terkait.

• Mengikuti standar kualitas dalam setiap interaksi dengan pelanggan.

• Menyusun laporan harian atau mingguan mengenai aktivitas dan hasil telemarketing.

Some of your duties will include:

·        Directly supervise process maintenance electrical and instrumentation Downstream/ Upstream equipment;

·        Schedule work orders, preventive maintenance, equipment, employee vacations, employee training and employee shifts to achieve desired throughput and availability;

·        Direct and enforce departmental procedures/policies, administer discipline, enforcing company policies, enforcing applicable safety and environmental laws and regulations.

·        Conduct safety meetings, staff meetings, planned task observations and safety inspections.

·        Regularly Facilitates and /or attends Safety toolbox meeting

·        Carry out pre-shift, pre-use & general inspections at required intervals also Conduct regular on the job task observations, provide feedback.

·        STP reviewed for all tasks before commencing work

·        Competence and understanding of logical troubleshooting techniques also Participation in group problem solving initiatives (ie RCFA).

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Daily targets are derived from weekly targets which are, in turn derived from monthly targets

·        System in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Maintain clear & concise position descriptions, communicate responsibility and accountability of role

·        Carry out audits and inspections in compliance with Environmental tracker

·        Maintain all material storage areas to comply with company environmental policies

·        Effective use of new technology to solve old problems

·        Supervises the maintenance and correct use of tools and equipment such as diagnostic and calibration equipment

·        Supervises in interpreting and using blueprints, specifications, vendor data, process flow sheets, drawings and schematic diagrams

·        Supervises in installing instrument components, lay-outs of job and fabricating cable tray supports

·        Supervises in performing calibration of process instrumentation and in modifying control loops,

·        Removes/replaces instruments, adds and deletes systems. Supervises in performing maintenance and calibration of electrical and mechanical transducers

·        Supervises the installation of pneumatic instruments and lines of air bellows for balancing purposes and hydraulic lines

Some of your duties will include:

·        Responsible to support Process Operations & Maintenance in ensuring the optimal performance of mineral processing plants. This role focuses on the development, implementation, and maintenance of industrial systems and applications to enhance reliability, efficiency, and productivity across the plant.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

·        Ensure and maintain all material storage areas to comply with company policies.

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

Some of your duties will include:

·        Responsible to utilize strong engineering tools, applicable standards and scientifically references in managing mainly but not limited environmental aspect (water, emission, energy, waste); Developing and implementing strategies to ensure the mining operations and future projects comply with all applicable environmental regulations and industry best practices, optimizing environmental performance with sustainable operation; included but not limited to engage with stakeholders, manage data, review technical documents, assist in env audit and inspection, and provide robust report.

·        To develop, support, and/or review technical standard and technical studies for new project or improvement.

·        To manage, conduct and/or support in environmental engineering projects such as energy conservation, water conservation, emission reduction, waste mitigation, reuse and reutilization

·        To be accountable for water, waste, energy, and emission inventory across project site wide

·        To conduct Life Cycle Analysis (LCA) and GHG calculation using recognized scientifically and statistical tools.

·        To conduct, coordinate, and/or support water audit and energy audit,

·        To support ESG team in preparing sustainability reports and audit (SASB, OJK, IFC, ICMM, Copper Mark)

·        To engage with internal and external stakeholders during aspect impact session, construction plan review, contractor performance review, incident investigation, audit, inspection, and government inspection.

·        Advises line management regarding regulation, data trend and evaluation. 

·        Provide required resources to manage water accounting, waste inventory, energy inventory, emission inventory.

·        Develop and ensure technical standard and procedure related with water, emission, energy, and waste comply with company and International standards (ICMM, IFC, Copper Mark etc).

·        Responsible to the material preparation in 4 aspect review for management, government, and corporate officials during weekly report, management review etc.

·        Review contractor performance and proposed plan.

·        Assist student PKL.

Berikut adalah contoh deskripsi pekerjaan Admin Online Shop yang sesuai untuk dipasang di portal Kemnaker. Anda dapat mengeditnya sesuai kebutuhan perusahaan:

Deskripsi Pekerjaan: Admin Online Shop

Lokasi Kerja: WFH/Remote

Status Pekerjaan: Part-time

Tugas dan Tanggung Jawab:

1. Mengelola pesanan pelanggan melalui platform online (Shopee, Tokopedia, WhatsApp, Instagram, dll.).
2. Membalas pertanyaan pelanggan dengan cepat, ramah, dan profesional.
3. Memantau dan memperbarui stok barang di sistem inventaris.
4. Membuat laporan penjualan harian/mingguan/bulanan.
5. Mengelola deskripsi produk, unggahan media sosial, dan kampanye promosi online.
6. Berkoordinasi dengan tim gudang/logistik untuk memastikan pengiriman tepat waktu.
7. Menangani keluhan pelanggan dan memberikan solusi terbaik.

Kualifikasi:

1. Minimal lulusan SMA/SMK (diutamakan jurusan Administrasi atau yang relevan).
2. Berpengalaman sebagai admin online shop (minimal 1 tahun, diutamakan).
3. Mahir menggunakan komputer dan aplikasi Microsoft Office (Word, Excel).
4. Terbiasa menggunakan platform marketplace (Shopee, Tokopedia, Lazada, dll.).
5. Komunikatif, teliti, dan mampu bekerja dalam tim.
6. Bersedia bekerja dengan target dan dalam situasi yang dinamis.

Kualifikasi :

1. Pria / Wanita

2. Menguasai SQL

3. Menguasai Phyton

4. Mahir Microsoft Excel

5. Tablue

Ketentuan :

1. Jujur dan bertanggung jawab Dapat bekerja dengan tim
2. Berpengalaman di bidang yang di butuhkan
3. Min S1 Sistem Informasi / TI / Engineer / MIPA

• Mempersiapkan dan menyortir dokumen sebelum datanya dimasukkan ke dalam komputer.
• Memasukkan data ke dalam database milik perusahaan.
• Memeriksa dan memastikan keakuratan data yang sudah dimasukkan ke dalam database.
• Menyelesaikan perbedaan informasi dan data yang tidak lengkap.
• Membuat data cadangan yang menjadi bagian dari rencana kontingensi.
• Menanggapi permintaan informasi dari anggota yang berwenang.
• Menguji sistem database baru dan pembaruan dari perangkat lunak.
• Mengelola dokumen dan catatan dengan baik.
• Menyiapkan laporan yang relevan sesuai dengan kebutuhan.
• Menerima dan memproses invoice untuk pembayaran dan memperbarui rincian invoice.
• Mengidentifikasi dan mengoreksi kesalahan saat memasukkan data menggunakan metode kontrol kualitas yang sesuai.

• Mengurusi seluruh media milik toko online yang meliputi email, media social, dll
• Mengecek setiap barang yang masuk
• Memproses seluruh orderan yang masuk
• Membalas seluruh chat / pertanyaan dari konsumen yang masuk
• Memproses seluruh orderan yang sudah paid
• Mengurusi resi pengiriman
• Merekap penjualan dan kiriman harian
• Packing paket

• Mengurusi seluruh media milik toko online yang meliputi email, media social, dll
• Mengecek setiap barang yang masuk
• Memproses seluruh orderan yang masuk
• Membalas seluruh chat / pertanyaan dari konsumen yang masuk
• Memproses seluruh orderan yang sudah paid
• Mengurusi resi pengiriman
• Merekap penjualan dan kiriman harian
• Packing paket

 Requirements :

• Bachelor degree in Legal or Environmental
• At least 3-5 Years of working experiences in Compliance field (preferred from mining company)
• Fluent in English (Speaking and Writing)
• Excellent writing skill & presentation

 Responsibilities:

•  responsible for overseeing an organization’s compliance with government laws and regulations.
•  coordinating with company management to identify potential risks, implementing policies and procedures to uphold laws and regulations and monitoring the company’s adherence to those policies and procedures.
• identifying and eliminating the risks of noncompliance, both externally and internally.
• -Constantly report to management concerning the organization’s compliance with laws and regulations.

Requirements:

• Candidate must possess at least diploma in any field
• Minimum has one year of working experience in related field
•  Required languanges : Mandarin, English
•  Required Skills : Filling, Administrative, Communication, Well organized
• Preferably Staff (non management & Non supervisor) specialized in clerical / Administrative support or Equivalent



 Responsibilities:

• Maintain relationship between company related institutions (I.e : Vendor / clients or government)
•  Handle administrative work such as travel arrangement, meeting preparation, taking MoM, etc
• Processing payment submission to Finance Department
• Translation both verbal and non verbal
• Filing

Requirements :

• Candidate must possess at least Bachelor's Degree in Business Studies/Administration/Management, Logistic/Transportation or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Mandarin fluency.
• Required Skill(s): Ms. Office, Taxation, Export Import, Negotiation, Indonesia Customs Regulation.
• Preferably Supervisor/Coordinator specialized in Logistics/Supply Chain or equivalent.
• Have knowledge in Ferro-nickel would be advantageous



Responsibilites :

•  Handling Customs Clearance process and ensure the export/import shipments applicable to the Indonesia Customs Regulations and Company Regulation
• Liaise with third party (forwarder) according Export/Import process
• Calculate duty and tariff payments owed on shipments
• Monitor or trace the location of goods
• Update Customs regulation to manager

Requirements : 

• Minimum 1 years experienced as personal assistant or executive assistant. Fresh Graduates are welcome
• Fluent in English
• Excellent in Communication, negotiation
• Attractive, well groomed, confident, resourceful and talkative

Responsibilities :

• Act as a liaison / representative between company and external parties such as government, ministries, and/or other insitutions
• Conduct internal and / or external meetings.
• Build and maintain a good relation with external parties such as governments, ministries and/or other institutions

Requirements :  

• Minimum diploma degree in Business administration or equivalent
• Good in communication verbal and non verbal, positive attitude and goal oriented

Responsibilities:

•  This position in mainly responsible for daily administration work, assisting in integrity training, collecting and translating integrity training materials; filling supplier information and assisting in organizing agreements.

Requirements :

•  Min Diploma Degree in Marketing / Management/ Business administration or equivalent
• Minimum 2 years experienced in marketing field
•  Fluent in English and Mandarin
•  Good at powerpoint
• Willing to work in Jakarta Selatan area with regular business hour



Responsibilities:

•  Identifying, evaluating, and managing suppliers to ensure that their quality, cost-effectiveness delivery time and service levels meet company requirements
• Analyze market conditions, find new potential suppliers and build good relation with suppliers
• This position also requires to resolve issues arising in the suplly chain and conductiong market trend analysis to support strategic sourcing and decision making

Requirements:

• Candidate must possess at least Diploma Degree in Accounting / Fiscal  Administration /   Taxation
• Hold brevet A/B Tax certification
• Required skill : Good in Ms. Excel
• Required Languange(s) : Mandarin
• At least 1 years of working experience in the related fields is required for this position
• Good knowledge of Indonesian Tax Laws and Regulations
• Excellent communication and team oriented personality
• Able to work with deadlines.

Responsibilities :

• Process monthly tax routine including calculation, payment and reporting
• Updates and translate current tax regulations to the management, able to identify tax accounting and transactions that have tax implications, do tax research, interpreting and applying the tax law, regulations, and cases to specific transactions and factual situations
• Assist in Tax compliance checking and accuracy of tax obligations
• Providing required data / documents related to Tax audit process
• Able to file tax Return and prepare related documents
• Communicate with internal PIC related to data completion for tax Audit and compliance purposes
• Communicate with external parties (Tax Office / Consultant) related to solve tax audit issues.

·        Create a new product concept through in-depth research based on market trends.

·        Know about making cosmetics in terms of concept or implementation.

·        Involve in a new product development project.

·        Do a market analysis of the products.

·        Collaborate with the marketing team to plan new products.

·        Support manufacturing and design activities by developing prototypes for products in development.

• Responsible for the identification of new business opportunities and the pursuit of all of the aspects associated with the deliverables for the programs.
• Responsible for and expected to consistently provide effective management of sales efforts along with the managed accounts to ensure business plan targets are met.