The Toolpusher is responsible to ensure that drilling schedules are achieved in compliance with company guidelines, policies and procedures. The position liaises with client representatives and rig site leadership to achieve operational objectives and milestones. The position is responsible for all operations and departments involved with the drilling and completion of the well. Also, to ensure that all work is performed safety, efficiently and according to procedure. This position is responsible for all operations, including but not limited to, hoisting, circulating, rotating, running casing, cementing or well control. The Toolpusher takes total ownership of all operations, departments and personnel pertaining to the drilling and completion of the well.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations.
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Support and assist onsite HSE Advisor for implementing rig site surveys, safety evaluations and hazard identification (hazard hunts).
• Collaborate with HSE Advisor to ensure personnel training matrix is updated and kept current.
• Follow the client’s daily drilling plans.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Maintain records and certifications of all drill pipe, subs and tools.
• Maintain records and certifications of all BOPE.
• Ensure that Company preventive maintenance procedures are implemented and observed.
• Ensure that sling/lifting gear register is current and certifications valid, preform periodic inspections to ensure lifting gear is in good condition
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Collaborate with client drilling representative and coordinate with drill crew to accomplish optimum desired drilling conditions.
• Monitors and reviews the tracking of rotating hours on tubular/BHA/Tools.
• Collaborates with vendors and service personnel to ensure a smooth transition for scheduled operational changes.
• Ensure performance of daily checks on Well control equipment; FOSV, Kelly cock valve, IBOP, Koomey, etc.
• Ensure rig crews’ competencies are developed and sufficient to perform their duties and responsibilities.
• Manage daily rig activities to include but not limited to drilling operations, HSE concerns, supply chain support, scheduling of maintenance and personnel issues.
• Ensure all rig operations are carried out in compliance with policies and procedures while adhering to any state and/or federal regulations.
• Ensure rig staffing levels are maintained appropriately to ensure project is completed safely and efficiently.
• Attend and actively participate to contribute knowledge, guidance and recommendations at all safety, operational, or leadership meetings.
• Monitor critical inventories and coordinate with supply chain personnel to ensure that equipment, parts and materials are received appropriately.
• Ensure that scheduled preventative maintenance is completely proficiently in order to minimize operational downtime.
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Comply with platform emergency response plan or station bills during emergencies and/or drills.
• Provide guidance and support to drill crew and third party personnel when installing rig specific equipment, including but not limited to casing, cementing, wire line and completion equipment.
• Ensures that rig crew personnel are proficient in responding to well control situations.
• Maintain and disseminate information on rig equipment and drill string performance or failures.
• Collaborate with warehouse/materialman to ensure parts, materials and rig equipment are delivered proficiently
• Perform additional duties, responsibilities, and special projects as may be directed.

The Rig Superintendent position is ultimately responsible for operational efficiencies and the safety of all personnel involved with the drilling and completion of the well. The Rig Superintendent position is to ensure that drilling schedules are achieved in compliance with company guidelines, policies and procedures. The position liaises with client representatives and rig site leadership to achieve operational objectives and milestones. The position is also responsible for all operations and departments involved with the equipment commissioning, maintenance, drilling and completion of the well, including but not limited to, hoisting, circulating, rotating, running casing, cementing or well control. Also, to ensure that all associated work is preformed safety, efficiently and according to procedure. The Rig Superintendent takes total ownership of all operations, departments and personnel. This includes ensuring compliance with all company, client, state or federal rules and regulations.      

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations.
• Enforce, clarify, and follow Company and Client policies, standards and procedures.
• Monitor work sites for safety violations to pro-actively prevent accidents.
• Preform periodic engagements with rig crews and participate from commencement of job task, i.e. pre job meeting, JSA, work safe procedure reviews and after action review (AAR).
• Preform JSA audits regularly.
• Support and assist onsite HSE advisor for implementing rig site surveys, safety evaluations and hazard identification excursions (hazard hunts).
• Collaborate with HSE advisor to ensure personnel training matrix is updated and kept current.
• Preform personnel evaluations and assis t with setting goals and objectives to encourage continued performance improvement.
• Participate in interview process for hiring rig personnel, recommend promotions, and approve transfers and training requests for rig personnel.
• Follow the client’s daily drilling plans.
• Communicates daily with the Operations Manager/ Area Superintendent to review and discuss operational activities.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Parker Drilling’s Competency Program - Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency compliance is applied and followed. 
• Oversee major overhauls of rig equipment and components.
• Maintain records and certifications of all drill pipe, subs and tools.
• Maintain records and certifications of all BOPE.
• Ensure that Company preventive maintenance procedures are implemented and observed.
• Ensure that sling/lifting gear register is current and certifications valid, preform periodic inspections to ensure lifting gear is in good condition.
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Collaborate with client drilling representative and coordinate with drill crew to accomplish optimum desired drilling conditions.
• Monitors and reviews the tracking of rotating hours on tubular/BHA/Tools.
• Collaborates with vendors and service personnel to ensure a smooth transition for scheduled operational changes.
• Ensure performance of daily checks on FOSV, Kelly cock valve, IBOP, BPV.
• Ensure rig crews’ competences are developed and sufficient to perform their duties and responsibilities.
• Manage daily rig activities to include but not limited to equipment commissioning, maintenance, drilling operations, HSE concerns, supply chain support, scheduling of maintenance and personnel issues.
• Ensure all rig operations are carried out in compliance with policies and procedures while adhering to any state and/or federal regulations.
• Ensure rig staffing levels are maintained appropriately to ensure project is completed safely and efficiently.
• Attend and actively participate to contribute knowledge, guidance and recommendations at safety, operational, or leadership meetings.
• Collaborate with Rig manager regarding crew scheduling to achieve crew continuity and strengths.
• Monitor critical inventories and coordinate with supply chain personnel to ensure that equipment, parts and materials are received appropriately.
• Ensure that scheduled preventative maintenance is completely proficiently in order to minimize operational downtime.
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Comply with platform emergency response plan or station bills during emergencies and/or drills.
• Provide guidance and support to drill crew and third party personnel when installing rig specific equipment, including but not limited to casing, cementing, wire line and completion equipment.
• Ensures that rig crew personnel are proficient in responding to well control situations.
• Maintain and disseminate information on rig equipment and drill string performance or failures.
• Collaborate with Platform Stores personel and Shore based Materials Coordinator to ensure parts, materials and rig equipment are delivered proficiently.
• Perform additional duties, responsibilities, and special projects as may be directed.
• Adhere to Internal Labour Conduct Code;
• Adhere to rules for labor protection and fire safety.

This position is responsible for planning, organizing, scheduling and managing daily maintenance operations and activities in assigned area.

Essential Functions:

• In coordination with Rig Manager and Maintenance personnel, arrange for availability of equipment planned maintenance.
• Directly involved in planning, developing and implementing modifications, capital repairs and improvements, recommending specifications and managing schedules for maintenance and maintenance contracts.
• Interact professionally and maintain effective working relationships with the management team to effectively meet departmental objectives.
• Coordinate activities with other rigs, programs and departments, including scheduling, coordinating and inspecting work performed by contractors.
• Respond to emergencies as requested and coordinate activities to utilize resources to affect repairs in the most expedient and cost effective manner.
• Monitor and report proper completion of al required data input including actual labor hours, comments, parts and supplies used in completing the Work Order.
• Assure conformance to all requirements of the Maintenance Management System including proper and timely completion of all work orders, unscheduled maintenance reports, failure analysis, root cause analysis and preventive measures.
• Participate in selecting third party facilities and repair services from approved vendor list as required in the region, based on Company requirements and regulatory standards.
• Write applicable maintenance procedures that promote defect-free maintenance work quality.
• Able and competent in root cause failure analysis leadership and investigations.
• Apply good stores management practices and parts management to ensure parts and equipment retain full reliability while stored.
• Schedule maintenance work into operations plan.
• Continually improving planning, scheduling, purchasing, stores, data management and job reporting systems to increase planning effectiveness and efficiency.
• Collaborate with maintenance supervision to schedule manpower and resources for the most effective production and maintenance outcomes.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the Company.
• Ensure key performance indicators are captured and reported for equipment reliability, maintenance department performance and planning and scheduling business flow process.
• Ensure that proper safety practices are followed in accordance with state and/or federal regulations and the Company’s HSE program.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

The Assistant Driller is a first line supervisor whose main duties are to direct and instruct the crew in the proper way to perform their duties and assigned tasks. This position is responsible for all operations pertaining to the drilling and completion of the well, including the circulating, rotating, hoisting, well control systems. It is the Assistant Driller’s responsibility to ensure that the work is performed safely, efficiently and according to procedure. The Assistant driller also takes total ownership of everything on the drilling location.

Essential Functions:

• Provide visible leadership with Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations during tour of duty. Assisting Driller with daily responsibilities and routinely communiticating with driller and client.
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Follow the client’s daily drilling plans.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure timely completion of accurate reports required by Company and client (including but not limited to daily drilling reports, pre-tour reports, hand-over notes, etc.).
• Update the well control board on a tourly basis.
• Maintain complete records of all tools and tubular run into the hole while drilling and/or reaming (including made up lengths, tool joints OD, ID, serial numbers).
• Track rotating hours on tubular/BHA/Tools.
• Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered and time required.
• Monitor drilling parameters and alarm systems.
• Monitor hole fill operations while tripping, logging, cutting drilling line or running casing.
• Record pickup, slack-off, rotating weights, and other drilling parameters.
• Operate drilling equipment.
• Maintain and adjust machinery in order to ensure proper and safe performance.
• Ensure floor and crown savers are function-tested and that testing results are recorded tourly.
• Ensure proper alignment of choke manifold and BOP remote console.
• Ensure performance of daily checks on FOSV, Kelly cock valve, IBOP, BPV.
• Secure well during well control events emergencies and drills.
• Install and record pressure testing of BOPE.
• Ensure rig equipment and locations are secured prior to rig moves.
• Comply with emergency response plan or Work Safe Procedures during emergencies and/or drills.
• Clean the mast and substructure with a high-pressure steam cleaning unit and/or high pressure wash gun.
• Performs scrubbing and cleaning of rig equipment and drilling packages as required with rig wash.
• Performs chipping and painting on drilling packages and equipment as required.
• Perform additional duties, responsibilities, and special projects as may be directed.

The Maintenance Supervisor is responsible to ensure that all maintenance and repairs of equipment are performed in a safe and efficient manner. The position is responsible for all drilling equipment pertaining to the drilling of the well. The position supervises onsite maintenance personnel to ensure that proper planning and scheduling of pre-determined maintenance is completed accordingly, including the availability of required parts.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude.
• Enforce, clarify, and follow Company policies, standards, and procedures while promoting operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations while ensuring the safety of those working under direct supervision.
• Coordinates with Rig Superintendent and Preventative Maintenance Coordinator on the maintenance, repair and refurbishment of equipment.
• Create applicable maintenance procedures that promote defect-free maintenance work quality.
• Responsible for reviewing, evaluating and maintaining maintenance schedules for equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Enters maintenance and repair data into a Maintenance management system (MMS)
• Provide onsite assistance and guidance to maintenance personnel with trouble shooting issues and repair.
• Monitor oil sample results and ensure recommendations are implemented onsite and reported accordingly.
• Track non-destructive testing and major maintenance to be performed at pre-determined intervals.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the company.
• Collaborate with maintenance team to schedule staffing and resources for the most effective productivity and timely completion of maintenance. Provide technical support for maintenance systems questions and problems.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all maintenance processes, procedures, and policies.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency is applied and followed
• Understand LO/TO and Permit to Work procedures.
• Maintain and update asset tags for onsite equipment.
• Maintain an adequate amount of spare parts are on hand at all times.
• Read and analyze electrical/mechanical drawings, schematics and equipment manuals.
• Perform annual assessments to evaluate performance, skills, qualifications and abilities of maintenance personnel.
• Perform additional duties, responsibilities, and special projects as may be directed.

This position is responsible for wide range of welding jobs such as Carbide Dressing, Hard Banding, Hard facing, Saw welding and general fabrication works.

Essential Functions:

• Perform all work safely and in accordance with the Company's HSE policies and procedures.
• Set-up/run RT & UT Quality Vessel Weld Processes – 3 (GMAW, FCAW, GTAW).
• Set-up/run RT Quality Pipe Weld – All Positions (6G).
• Set-up/run UT Quality Nozzle Welds – All positions (6G).
• Set-up/run Carbon Arc Gouging.
• Able to make any UT or RT Weld Repair.
• Clean and stamp all welds.
• Set-up/run all structural non-code welds.
• Know how to run all welding equipment.
• Ability to read drawings, WPS’s/PQR’s.
• Ability to lead others and plan ahead – Good.
• Knowledge of PT, MT, UT, RT methods.
• Ability to make correct decisions – Good.
• Speed of accomplishing tasks – Fast. - Ability to work safely – Best.
• Average Percent of weld repairs - <0.5%.

This position is responsible for organizing and managing the equipment, materials and supplies in the warehouse.

Essential Functions:

• Accurately maintain records on all equipment, materials supplies and spare parts in the warehouse.
• Systematically label incoming warehouse items and store appropriately in bins, boxes or containers.
• Work closely with Toolpusher, Mechanic and Electrician to ensure that adequate quantities of spare parts are readily available and that they are ordered, received and issued properly, according to the Company’s internal control procedures.
• As needed, will issue warehouse items and track returned items.
• Prepare Material Requisitions, obtain appropriate approval and forward requisition to Division Office for final approval and ordering.
• Prepare Material Receipts and Material Transfers and forward to Division Administrative Manager to ensure all items are properly accounted for.
• Take physical warehouse inventory annually and send report to Division Administrative Manager for reconciliation against accounting records.
• As appropriate, train staff in proper warehouse duties and procedures.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

1. Mampu menyusun dan mengatur data
2. Pandai mengaplikasikan Ms.Office ,Ms.Excel ,Ms.Word dsb,
3. Pandai memperbaharui basis data produk
4. Mampu mengumpulkan data-data informasi dari berbagai sumber
5. Mampu bekerja dibawah team

• Mengatur dan melakukan penjualan secara langsung secara offline(ke lapangan) dan online
• Menawarkan kepada klien tentang layanan dan penawaran perusahaan
• Menjaga hubungan dengan klien dengan memberikan dukungan dan informasi
• Menyarankan peluang baru dan solusi
• Memberikan tanggapan yang cepat terhadap pertanyaan atau penyelesaian keluhan klien
• Mencapai target penjualan
• Mengelola catatan aktivitas penjualan dan menyusun laporan penjualan
• Membantu membangun jaringan penjualan yang kuat untuk mencapai target perusahaan
• Bertanggung jawab untuk pengembangan, memperbesar dan menjaga jaringan penjualan
• Membantu dalam memberikan layanan dan mempertahankan pelanggan untuk kembali membeli jasa training
• Presentasi produk dengan detail kepada client
• Mengelola dan memprioritaskan beberapa penjualan, prospek, dan proyek secara strategis
• Menjaga hubungan baik dengan partner perusahaan

• Mengelola dan mengatur pengarsipan data perusahaan
• Memelihara dan memperbaharui database perusahaan
• Menyiapkan dan menyunting dokumen dan laporan
• Menyelesaikan pekerjaan dengan tepat waktu
• Mengelola stok persediaan barang dan melakukan pemesanan

- Mencari Calon Konsumen

- Membantu Calon Konsumen dalam Proses Pengambilan Kredit

- Melakukan Proses Survey

- Membina Hubungan baik dengan Konsumen

Terapis Kecantikan / Nail Art / Hair Stylist / Terapis Reflexiologi

Kualifikasi :

• Memiliki Pengalaman bekerja di Klinik/Salon kecantikan
• Memilik Sertifikat pelatihan (yang berhubungan dengan profesinya)
• Terapis Reflexiologi berpengalaman min 2 thn
• Terbiasa melakukan perawatan kecantikan kepada client
• Mengerti produk-produk yang sesuai dengan kondisi kulit/rambut client
• Dapat mengerti Bahasa Inggris (Pasif)
• Domisili Jakarta Barat
• Berpenampilan menarik dan rapi

Melakukan perawatan dan atau perbaikan terkait elektrikal pada mesin maupun peralatan lainnya.

Gelar sarjana dalam bisnis, pemasaran, komunikasi atau bidang terkait.
Dua hingga tiga tahun pengalaman kerja terkait dengan penjualan.
Gelar master dalam bisnis atau pemasaran ideal untuk peluang karir lebih banyak.
Sertifikasi penjualan meningkatkan kredensial seseorang.

Syarat Umum:

• Pria/Wanita
• Max 45 Thn
• Jujur & Terampil Komunikasi
• Target Oriented
• Memiliki SmartPhone min 4GB RAM
• Memiliki Motor & SIM C

Benefit:

• Gaji Pokok
• Komisi Penjualan
• Pelatihan & Pengembangan
• jenjang Karir

1. Melakukan pengantaran ke outlet-outlet dengan mobil yang telah disediakan perusahaan
2. Membuat laporan harian terkait kondisi Mobil
3. Melaporkan kepada atasan langsung jika terdapat kerusakan mobil atau kendala saat berkendara

PT. MEGA CENTER OFFICIIAL, Membuka lowongan pekerjaan pekerjaan yang di rekrut sebagai adminitrasi pemasaran dan penjualan secara online untuk kamu yang para freelance/WFH. Di sini kita belerja secara online yang bekerja sama dengan merk dan brand yang di tentukan oleh pihak perusahaan yang akan menjadi donatur di PT. MEGA CENTER OFFICIAL.

1. Memproses Faktur yang akan dikirimkan ke customer pada sistem perusahaan.
2. Memproses Faktur yang telah dikirimkan pada sistem perusahaan.
3. Melakukan serah terima Faktur kepada Admin Nota

1. Melakukan kunjungan ke outlet/toko sesuai dengan jadwal yang sudah dibuat.
2. Melakukan penjualan produk sesuai dengan yang ditentukan perusahaan
3. Mencapai target penjualan sesuai yang ditentukan.
4. Melakukan penagihan ke outlet

Operator Jahit / Sewing Pengalaman Garment

1. Menangani segala bentuk perizinan perusahaan terkait pelaksanaan kegiatan usaha, operasional dan administrasi perusahaan di instansi pemerintahan terkait.
2. Menangani penerapan pelaksanaan kegiatan perusahaan patuh sesuai dengan ketentuan perundang-undangan yang berlaku (Compliance) dan tata kelola perusahaan yang baik (Good Corporate Governance).
3. Menyusun dan/atau mereview perjanjian kerjasama
4. Membina hubungan baik dengan, instansi pemerintah Pemerintah daerah dan Forkominda Daerah.

1. Bisa mengaplikasikan Ms.Office, Ms. Excel, Ms. Word, dan sebagainya
2. Bisa menyalin data-data penting
3. Bisa mengatur dan menyusun data-data
4. Mampu memperbaharui informasi ke dalam format yang sesuai dengan kebutuhan organisasi atau proyek tertentu
5. Mengiput data-data penting

Production Management

• Responsible for Production results.  Drive execution of site improvement plans, help set production improvement goals, ensure priorities and accountabilities are clear, provide resources and remove obstacles to ensure success.
• Analyze and draw information for long-term strategic change and improvement for multiple teams/shifts.
• Lead significant projects & improvement initiatives, scheduling and planning, budgeting and control on assigned production lines.  
• Design and implement production improvement strategies for safety, cost, quality, training, inventory and services.
• Oversee the practice of all health and safety procedures, ensuring that safety is employees’ top priority and lead a safe operation of the business unit and comply with legal, legislative and corporate safety requirements.
• Ensure that manufacturing team members meet site goals and objectives in the establishment of sites’ annual production plans
• Plans, directs and coordinates the ordering and distribution of products, parts, and accessories. Ensures adequate and timely distribution of these elements to attain maximum sales potential consistent with good inventory control.
• Ensure tracking and use of key performance indicators to promote improved operational and business results.

Employee Development & Management

• Train and provide development opportunities for staff and ensure annual goals are complete and communicated (Global Performance Management System is updated & provides regular feedback). Act as a team role model and change-agent.
• Model and promote the Corporation’s Code of Business Ethics and Values.
• Perform general management duties, exercising usual authority concerning staff, performance appraisals, promotions and terminations. Responsible for estimating personnel needs, assigning work, meeting completion, interpreting and ensuring consistent application of company policies.
• Positively lead and influence team members to partner together to achieve individual and business goals.

Maintenance Focus

• Ensures maximum efficient production of facilities and equipment, as well as the care of all grounds and support equipment, through the direction of a technical support staff made up of supervisors, technicians, custodians, and the purchase of necessary outside technical and non-technical support services. 
• Plans, coordinates, and supervises machine and/or building maintenance schedules and activities.
• Coordinates all ordering of parts and services that will maintain or improve the machine/facility cost effectively.

Ahli dalam bidang dalam proses mulai dari awal sampai tahap akhir pengecatan

PT OCS Global Service Indonesia membutuhkan tehnisi untuk penempatan di Kuta Bali dengan kualifikasi sebagai berikut :

1. Pria minimum usia 23 tahun
2. Pendidikan minimum SMK Teknik elektro
3. Memahami dan mampu melakukan pekerjaan mekanikal, elektrikal dan sipil
4. Mampu menggunakan alat ukur AVOmeter dan MEGGER
5. Mampu membaca dan memahami diagram wiring motor listrik dan Star Delta
6. Bersedia untuk bergabung secepatnya