Kualifikasi:

1. Perempuan dan Pria
2. Umur 20 - 28 tahun
3. Memiliki sertifikat uji kemampuan bahasa Jepang JLPT / NAT-TEST N3/N4
4. Mempunyai semangat dan keinginan kuat bekerja di Jepang
5. Sehat jasmani dan rohani
6. Belum pernah magang di Jepang
7. Tidak buta warna (total/parsial)

Persyaratan Wajib ( Harus dipenuhi / Ada)

• Ex-kenshu atau magang di Jepang
• Menyelesaikan pendidikan minimal SMA/SMK sederajat
• Memiliki pekerjaan dan sudah bekerja minimal 1 tahun
• Apabila ex-kenshu / magang harus minimal 1 tahun sesudah kepulangan dari Jepang
• Ada perusahaan penerima, bisa perusahaan lain yang mau menerima and bekerja
• Sertifikat JITCO (bagi ex-kenshu)
• Sertifikat IMM (bagi ex-kenshu)
• Sertifikat ujian kenshu ke jitsu (bagi ex-kenshu)
• Memiliki pasport RI aktif
• Bukan termasuk datfar black-list (daftar hitam) karena di deportasi

1. DOKUMEN ASLI:

• KTP/ E-KTP
• Akta Lahir
• Kartu Keluarga
• Ijazah (SD, SLTP, SMA/SMK)
• Packlaring jika ada / sertifikat BLK
• SKCK dengan rumus sidik jari yang masih berlaku
• Sertifikat medikal pra yang masih berlaku
• Kartu Kuning / AKI yang masih berlaku
• Transkrip nilai SMA/SMK
• Pas foto 3x4 (6 lembar) dan 4x6 (6 lembar)

2. DOKUMEN FOTOKOPI:

• KTP/ E-KTP (legalisir)
• Akta Lahir (legalisir)
• Kartu Keluarga (legalisir)
• Ijazah (SD, SLTP, SMA/SMK) (legalisir)
• Packlaring jika ada / sertifikat BLK
• SKCK dengan rumus sidik jari yang masih berlaku (legalisir)
• Sertifikat medikal pra yang masih berlaku
• Kartu Kuning / AKI yang masih berlaku
• Transkrip nilai SMA/SMK (legalisir)

3. PERSYARATAN TAMBAHAN:

• Sertifikat Nihongo Ryoku Shiken level 3 / 3 - kyu (bagi ex-kenshu) dan bagi yang umum
• Sertifikat kursus seperti, bahasa inggris, komputer, menggambar teknik / AutoCAD (bagi ex-kenshu) dan bagi yang umum
• Surat Pengalaman kerja di Jepang (bagi ex-kenshu)
• Surat pengalaman kerja di tempat lain, bagi yang pernah bekerja sebelumnya (bagi ex-kenshu) dan bagi yang umum
• Surat keterangan bekerja, bagi yang masih aktif bekerja (bagi ex-kenshu) dan bagi yang umum

GAJI DAN TUNJANGAN GAJI

1. Minimal setara atau lebih tinggi dari orang Jepang apabila mempunyai skill dan kemampuan melebihi orang Jepang

Jenis Pekerjaan:

1. Perawat Jompo ( Caregiver / kaigo)
2. Restoran
3. Pembuatan kapal
4. Pertanian
5. Perikanan
6. Pengolahan makanan
7. Pembersihan gedung
8. Pengolahan material (moulding)
9. Pemrosesan mesin industri
10. Industri listrik & IT
11. Konstruksi
12. Pemeliharaan mobil
13. Bidan penerbangan
14. Perhotelan

SILAHKAN MENDAFTAR PADA LINK BERIKUT www.tinyurl.com/portalluarnegeri ATAU KONTAK ADMIN DI +62 818-811-372 DENGAN KODE "DAFTAR PORTAL LUAR NEGERI"

Kualifikasi:

1. Perempuan
2. Umur 20 - 28 tahun
3. Memiliki sertifikat uji kemampuan bahasa Jepang JLPT / NAT-TEST N3/N4
4. Mempunyai semangat dan keinginan kuat bekerja di Jepang
5. Sehat jasmani dan rohani
6. Belum pernah magang di Jepang
7. Tidak buta warna (total/parsial)

Persyaratan Wajib ( Harus dipenuhi / Ada)

1. DOKUMEN ASLI:

• KTP/ E-KTP
• Akta Lahir
• Kartu Keluarga
• Ijazah (SD, SLTP, SMA/SMK)
• Packlaring jika ada / sertifikat BLK
• SKCK dengan rumus sidik jari yang masih berlaku
• Sertifikat medikal pra yang masih berlaku
• Kartu Kuning / AKI yang masih berlaku
• Transkrip nilai SMA/SMK
• Pas foto 3x4 (6 lembar) dan 4x6 (6 lembar)

2. DOKUMEN FOTOKOPI:

• KTP/ E-KTP (legalisir)
• Akta Lahir (legalisir)
• Kartu Keluarga (legalisir)
• Ijazah (SD, SLTP, SMA/SMK) (legalisir)
• Packlaring jika ada / sertifikat BLK
• SKCK dengan rumus sidik jari yang masih berlaku (legalisir)
• Sertifikat medikal pra yang masih berlaku
• Kartu Kuning / AKI yang masih berlaku
• Transkrip nilai SMA/SMK (legalisir)

3. SURAT PERNYATAAN:

• Surat izin orang tua (legalisir)
• Surat rekomendasi RT/RW dan Kelurahan (legalisir)
• Surat pernyataan belum pernah mengikuti program pemagangan ke Jepang khusus bagi yang belum pernah mengikuti program magang ke Jepang (bermaterai)
• Surat pernyataan mengikuti program pemagangan ke Jepang (bermaterai)
• Surat pernyataan kebenaran dan keaslian data (bermaterai)

GAJI DAN TUNJANGAN GAJI

1. Kerja di bagi dalam 3 shift
2. Adakalanya masuk di hari libur
3. Patokan Gaji yang didapat sebesar 177.120 Yen (Kotot, 22 hari kerja + lembur di hari libur)
4. Rincian potongan (Patokan) sebagai berikut :

• Asuransi sosial (shakai hokeng) 25.000 Yen
• Sewa asrama 25.000 Yen
• Listrik, air, gas 5.000 Yen
• Internet 2.000 Yen
• Total 57.000 Yen

5. Gaji bersih yang didapat adalah : 120.120 Yen (Jumlah aktual gaji akan berbeda sesuai UMR masing-masing daerah di Jepang, berikut dengan perincian di atas dan jumlah lembur)

SILAHKAN MENDAFTAR PADA LINK BERIKUT www.tinyurl.com/portalluarnegeri ATAU KONTAK ADMIN DI +62 818-811-372 DENGAN KODE "DAFTAR PORTAL LUAR NEGERI"

ABOUT YOUR ROLE:

Provides financial information to management by researching and analyzing accounting data; prepares reports; supervises and maintains regular accounting processes.

YOUR RESPONSIBILITIES WILL INCLUDE:

• Ensuring compliance with relevant accounting standards, tax regulations, and industry-specific guidelines
• Daily task costing ( update standard cost for new items, checking inventory and expense and propose journal reclassify to RTR team by weekly basis )
• Performing month-end cost accounting close and ensure all deadlines are met (month end schedule cut off, liaise with Wh and Ops team for reconciliation raw materials, work-in-progress and finished-goods stock, recons stock on hand in system vs production report, month end closed costing ERP system )
• Controls inventory including evaluation of product cost, bill or material accuracy, period physical inventory, etc.
• Preparing and calculate for scrap analysis
• Preparing and calculate for cost of  good manufacture & cost of goods sold reports
• Maintaining cost accounting system and cost ledger (reconciliation system vs journal entries adjustment)
• Analyzing inventory valuations 
• Analyzing & Monitoring unit cost variance (Comparing actual costs to standard costs to identify deviations and investigate the reasons behind them)
• Analyzing and liaising with GPD team related inventory standard cost (establishing and maintaining standard costs for products or services in ERP system)
• Liaise with the FPA team regarding Report analysis on margins by product and product line (Calculating the costs associated with producing specific products or services & eEvaluating profitability by analyzing cost structures against selling prices)
• Supporting and responsible for ad hoc requirement related costing ( regional report, internal & external audit )
• Responsible for managing the hardcopy/ supporting document with proper and tidy filling.
• Utilizing various accounting and cost management software to input, track, and analyze cost-related data.

• Mengeksekusi strategi penjualan produk berkaitan dengan reseller
• Mengelola hubungan dengan reseller
• Melakukan monitoring kinerja reseller
• Mengumpulkan dan menganalisis data penjualan reseller untuk mengidentifikasi peluang dan strategi baru
• Mengidentifikasi dan merekrut reseller baru
• Bekerja sama dengan tim sales dan produksi untuk memastikan ketersediaan produk

• Plan, set, and deliver standards for learning.
• Prepare and support critical thinking for students in the classroom.
• Establish classroom management utilizing positive coaching.
• Observe and evaluate student's performance and development.
• Understanding of academic, social, and behavioral needs and characteristics of high-level students.
• Establish links with the parent community to ensure that parents are kept well informed about student progress.

Kami mencari Business Manager (Team Leader) yang berpengalaman untuk memimpin dan mengawasi pekerjaan karyawan di perusahaan kami. Tugas utama adalah bertanggung jawab untuk memastikan efisiensi operasi bisnis serta menetapkan tujuan strategis kedepannya. Selain itu juga harus memiliki kompetensi memberikan bimbingan untuk peningkatan kinerja, dengan cara yang menggabungkan visi dan budaya perusahaan. Tujuannya adalah untuk memastikan profitabilitas kegiatan perusahaan kami untuk mendorong pembangunan berkelanjutan dan kesuksesan jangka panjang.

Tanggungjawab Kerja:

• Melakukan monitoring terhadap tim marketing/business partner dalam hal kinerja dan pencapaian target
• Melakukan market review dan menjalankan strategi untuk mencapai target yang ditetapkan
• Bertanggung jawab atas proses bisnis dalam hal SOP, baik secara administrasi maupun di lapangan.
• Bertanggung jawab atas portofolio cabang/point secara kualitas dan kuantitas
• Bertanggung jawab atas soliditas tim dan mampu me-manage konflik internal tim atas dasar peraturan perusahaan.

• Pendidikan terakhir minimum Diploma

• Memiliki pengalaman bertanggung jawab dalam memimpin tim min 2th
• Berpengalaman memimpin lebih dari 5-10 anggota tim
• Memiliki pengalaman min 2 tahun di Micro Finance sebagai Manager (Lembaga Keuangan Sistem Grameen diutamakan)
• Dapat menyusun strategi sales & marketing sebagai paduan tim untuk mencapai target
• Mempunyai motor dan SIM C
• Bersedia ditempatkan di seluruh wilayah Sulawesi Selatan

Kemampuan yang Dibutuhkan:

• Disiplin Tinggi (berintegritas, jujur & transparan)
• Memiliki kekuatan komunikasi & berkolaborasi dengan tim
• Memiliki semangat belajar yg tinggi terutama untuk menganalisa informasi dan data
• Mudah beradaptasi pada perubahan dan berorientasi pada target
• Mampu membangun budaya coaching untuk meningkatkan performa tim

• Gapok + Insentif
• Tunjangan
• Asuransi Kesehatan
• Jenjang Karir
• Asuransi kehilangan sepeda motor*
• Program Pinjaman Karyawan*
• Benefit Pernikahan*
• Benefit Kelahiran anak*
• Umroh untuk karyawan berprestasi*

MENGELOLA DATABASE KARYAWAN

MELAKUKAN PROSES RECRUITMENT

MENGERJAKAN PEKERJAAN GA DAN OPERASIOAL KANTOR LAINNYA

Job Description

• Bertanggungjawab terhadap pencapaian target penjualan debitur melalui pengembangan jaringan agency/kemitraan dengan pihak lain (Pinjam Dana Jaminan BPKB Mobil)
• Melakukan rekrut BA/Agen/Mitra BFI untuk pengembangan jaringan sesuai dengan profil yang tepat
• Membina dan membantu BA/Agen/Mitra BFI untuk mengembangkan strategi agency dengan tujuan menghasilkan jumlah debitur
• Melakukan koordinasi dengan Supervisor dan pihak lainnya dalam pelaksanaan aktifitas hariannya

The Electrician position performs all tasks and duties of an electrical discipline including but not limited to, installing or maintaining the variable speed /SCR drives, electrical wiring on miscellaneous equipment including but not limited to, generators, air conditioning, refrigeration, and alarm systems. The position is responsible for all drilling and support equipment pertaining to the drilling of the well including but not limited to, circulating, rotating, hoisting and well control systems.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all electrical processes, procedures, and policies.
• Promote operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations.
• Supervise and ensure the safety of those working under direct supervision.
• Comply with emergency response plan or Work Safe Procedures during emergencies and/ or drills.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Understand LO/TO and Permit to Work procedures.
• Download and Upload PLC programs.
• Troubleshoot control logics with PLC’s based control.
• Read and analyze PLC Control Logics.
• Troubleshoot and analyze VFD control logics.
• Splice wire with approved cutting device or cutting pliers and soldiers’ connections to fixtures, outlets and equipment.
• Test circuit connections using electrical test equipment.
• Install test and maintain electrical equipment such as air conditioning, heating and refrigeration equipment.
• Respond to emergencies as requested and coordinate onsite activities to utilize resources to facilitate repairs in the most expedient and cost effective manner.
• Install and repair lighting systems.
• Perform preventative and corrective maintenance of electrical equipment.
• Repair electrical equipment such as panel lighting, circuit breakers, junction boxes, voltage regulators and reverse current relays.
• Fabricate and install electrical distribution panels for motor start and operations.
• Fabricate, install and maintain alarm and video system.
• Install, calibrate and maintain gas detection equipment.
• Maintain a preventative maintenance schedule for all electrical equipment.
• Read and analyze electrical drawings, schematics and equipment manuals.
• Repair or replace defective or worn electrical parts.
• Troubleshoot miscellaneous electrical equipment.
• Foresee potential equipment malfunctions or failures and preforms required repairs, adjustments or modification to resolve the problem.
• Coordinate with Maintenance Manager on the maintenance, repair and refurbishment of equipment.
• Create Job requests and work orders as required and enter into maintenance tracking system
• Ensure an adequate amount of spare parts are on hand at all times.
• Submit requisitions to Rig Manager for approval.
• Maintain records of all electrical inventories and place orders as required within budgetary limits.
• Perform additional duties, responsibilities, and special projects as may be directed.

This position is responsible for the maintenance and repair of hydraulic systems on the Company’s rigs. Provides failure-free and technically correct safe operating performance of hydraulic equipment. Inspects, trouble shoots and performs repairs of hydraulic systems, on rig and support equipment.

Essential Functions:

• Inspects hydraulic, hose and cable operated attachments on cranes and on site equipment;
• Overhaul / recondition / performance testing of hydraulic components including fixed and variable displacement pumps and motors, open and closed loop systems, manual, solenoid-operated, proportional and servo valve, hydraulic cylinders, filtration, hoses and pipe assemblies;
• Upgrading and improvement of onsite hydraulic equipment. Perform skilled and unskilled laboring duties related to the installation, maintenance and repair of a wide variety of mechanical / hydraulic systems and equipment;
• Organizes inter-repair maintenance, timely and high-quality repair and modernization of hydraulic equipment, works on increasing its reliability and durability, technical supervision of the condition, maintenance, repair of major and minor equipment, ensures the rational use of materials for repair;
• Supervise adjustment and alignment, new equipment utilization, in equipment tests, in hydraulic equipment acceptance, in hydraulic equipment removal from operations;
• Examine equipment, separate units and component parts working condition, develop and make arrangements for unplanned equipment shut-down prevention, separate units and component parts service life, overhaul life extension, improve integrity of equipment, in service reliability improvement, arrange specialized repair on the rig;
• Takes part in equipment excessive wear, down time root causes investigation, in incidents investigation, in development and implementation of liquidation and prevention activities;
• Maintain control for equipment installation, proper equipment storage at warehouse, check and provide lifting and other equipment to government technical control in time;
• Improve service treatment of operating equipment, repair and preventative maintenance arrangement based on labor mechanization and advanced technologies application, subordinates work management improvement;
• Fulfill requirements for PTW permit to work as required to perform duties;
• Fulfill requirements to safely perform isolations of equipment following the Lock Out Tag Out guidelines and procedures;
• Responsible to service, maintain and diagnose symptoms on the drilling rig equipment; Responsible for rigging up/down the drilling rig as applicable;
• Ensure that all maintenance-related procedures are carried out in a safe manner and in compliance with the regulations of the company and accordingly with good engineering practices
• Responsible for creating and requesting materials using approve company Field Requests forms to the maintenance supervisor for review and further processing; Responsible for carrying out any and all work as assigned;

The Mechanic position performs all tasks and duties of a mechanical discipline including but not limited to, installing and maintaining engines, hydraulic motors, pumps, compressors, and miscellaneous mechanical devices. The position is responsible for all mechanical Platform equipment The position is also responsible for uploading maintenance and repair data into a Maintenance Management System (MMS).

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all mechanical processes, procedures, and policies.
• Promote operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations.
• Supervise and ensure the safety of those working under direct supervision.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• The Mechanic will also support the timely execution of Parkers Operations Readiness and Assurance activities during the Pre-operations phase in the shipyard.
• Responsible for morale and order within crew.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency compliance is applied and followed.
• Understand LO/TO and Permit to Work procedures.
• Maintain and repair mechanical equipment and devices.
• Repair or replace defective or worn parts.
• Lubricate and service mechanical equipment as specified on lubrication schedule.
• Perform inspections of mechanical equipment as required.
• Perform preventative and corrective maintenance on mechanical equipment.
• Maintain a preventative maintenance schedule for all mechanical equipment.
• Adjust or regulate functional parts of machinery, devices, and control instruments.
• Troubleshoot and analyze mechanical malfunctions and failures.
• Read and analyze mechanical drawings, P&ID’s (Process & Instrumentation Drawings), schematics and equipment operating and Maintenance Manuals.
• Enter maintenance and repair data into the Computerized Maintenance Management System (CMMS).
• Create Job requests and work orders as required and enter into maintenance tracking system.
• Coordinate with Rig Superintendent/Maintenance Lead on the maintenance, repair and refurbishment of equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Respond to emergencies as requested and coordinate onsite activities to utilize resources to facilitate repairs in the most expedient and cost effective manner.
• Ensure an adequate amount of spare parts are on hand at all times.
• Submit requisitions to Rig Manager/Purchasing Manager for approval.
• Maintain records of all mechanical inventories and place orders as required within budgetary limits.
• Set up and operate lathe, drill press, grinder and other metalworking tools to facilitate any necessary repairs.
• Perform additional duties, responsibilities, and special projects as may be directed.

The Electronics Technician performs all tasks and duties of an technician discipline including but not limited to, installation or maintaining electrical control and instrumentation systems, i.e. electronics, programmable controllers, telecommunications, transmitters, and hydraulic, pneumatic systems. The Electronics Technician is responsible for all electrical and electronic instrumentation equipment pertaining to the drilling of the well, including circulating, rotating, hoisting and well control systems. The position is also responsible for uploading maintenance and repair data into a Maintenance Management System (MMS).

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Enforce, clarify, and follow Company and Client policies, standards, and procedures.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all IT discipline processes, procedures, and policies.
• Promote operational excellence through procedural discipline.
• Supervise and ensure the safety of those working under direct supervision.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed
• Ensure Client competency standards are applied and requirements followed.
• Understand LO/TO and Permit to Work procedures.
• Implement and administer computer software programs for data log and control including management of change and version controls on software.
• Read, understand and analyze drawings, schematics and equipment manuals
• Perform preventative and corrective maintenance on electrical /electronic equipment.
• Coordinate with Maintenance Lead on the maintenance, repair and refurbishment of equipment.
• Enter maintenance and repair data into the SAP Maintenance Management System (MMS)
• Create Notifications and Work Orders as required and enter into SAP maintenance system
• Ensure an adequate amount of critical instrumentation spare parts are on hand and serviceable at all times.
• Repair or replace defective or worn electrical/electronic/instrument parts.
• Troubleshoot miscellaneous electrical/electronic equipment.
• Foresee potential equipment malfunctions or failures and perform required repairs or adjustments to resolve the problem.
• Respond to emergencies as requested and coordinate onsite activities to utilize resources to facilitate repairs in the most expedient and cost effective manner.
• Splice wire with approved cutting device or cutting pliers and solder connections to fixtures, outlets and equipment.
• Test circuit connections using electrical test equipment.
• Participate with installations, repairs, troubleshooting, and maintaining high/low voltage electrical equipment. Also assist with maintenance on related devices including transformers, power panels, light fixtures, receptacles, and disconnect switches.
• Submit requisitions to Senior Toolpusher /Purchasing Coordinator for approval.
• Perform additional duties, responsibilities, and special projects as may be directed.

The Senior Electrician position performs all tasks and duties of an electrical discipline including but not limited to, installing or maintaining the variable speed /SCR drives, electrical wiring on miscellaneous equipment including but not limited to, generators, air conditioning, refrigeration, and alarm systems. The position is responsible for all drilling and support equipment pertaining to the drilling of the well including but not limited to, circulating, rotating, hoisting and well control systems.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all electrical processes, procedures, and policies.
• Promote operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations.
• Supervise and ensure the safety of those working under direct supervision.
• Comply with emergency response plan or Work Safe Procedures during emergencies and/ or drills.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Understand LO/TO and Permit to Work procedures.
• Download and Upload PLC programs.
• Troubleshoot control logics with PLC’s based control.
• Read and analyze PLC Control Logics.
• Troubleshoot and analyze VFD control logics.
• Splice wire with approved cutting device or cutting pliers and soldiers’ connections to fixtures, outlets and equipment.
• Test circuit connections using electrical test equipment.
• Install test and maintain electrical equipment such as air conditioning, heating and refrigeration equipment.
• Respond to emergencies as requested and coordinate onsite activities to utilize resources to facilitate repairs in the most expedient and cost effective manner.
• Install and repair lighting systems.
• Perform preventative and corrective maintenance of electrical equipment.
• Repair electrical equipment such as panel lighting, circuit breakers, junction boxes, voltage regulators and reverse current relays.
• Fabricate and install electrical distribution panels for motor start and operations.
• Fabricate, install and maintain alarm and video system.
• Install, calibrate and maintain gas detection equipment.
• Maintain a preventative maintenance schedule for all electrical equipment.
• Read and analyze electrical drawings, schematics and equipment manuals.
• Repair or replace defective or worn electrical parts.
• Troubleshoot miscellaneous electrical equipment.
• Foresee potential equipment malfunctions or failures and preforms required repairs, adjustments or modification to resolve the problem.
• Coordinate with Maintenance Manager on the maintenance, repair and refurbishment of equipment.
• Create Job requests and work orders as required and enter into maintenance tracking system
• Ensure an adequate amount of spare parts are on hand at all times.
• Submit requisitions to Rig Manager for approval.
• Maintain records of all electrical inventories and place orders as required within budgetary limits.
• Perform additional duties, responsibilities, and special projects as may be directed. Adhere to Internal Labour Conduct Code; Adhere to rules for labor protection and fire safety.

The Driller is a first line supervisor whose main duties are to direct and instruct the crew in the proper way to perform their duties and assigned tasks. This position is responsible for all operations pertaining to the drilling and completion of the well, including the circulating, rotating, hoisting, well control systems. It is the Driller’s responsibility to ensure that the work is performed safely, efficiently and according to procedure. The driller also takes total ownership of everything on the rig floor.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations during tour of duty.
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Follow the client’s daily drilling plans.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure timely completion of accurate reports required by Company and client (including but not limited to daily drilling reports, pre-tour reports, hand-over notes, etc.).
• Update the well control board on a tourly basis.
• Maintain complete records of all tools and tubular run into the hole while drilling and/or reaming (including made up lengths, tool joints OD, ID, serial numbers).
• Track rotating hours on tubular/BHA/Tools.
• Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered and time required.
• Monitor drilling parameters and alarm systems.
• Monitor hole fill operations while tripping, logging, cutting drilling line or running casing.
• Record pickup, slack-off, rotating weights, and other drilling parameters.
• Operate drilling equipment
• Maintain and adjust machinery in order to ensure proper performance.
• Ensure floor and crown savers are function-tested and that testing results are recorded tourly.
• Ensure proper alignment of choke manifold and BOP remote console.
• Ensure performance of daily checks on FOSV, Kelly cock valve, IBOP, BPV.
• Secure well during well control events, emergencies and drills.
• Install and record pressure testing of BOPE.
• Ensure rig equipment and locations are secured prior to rig moves.
• Comply with emergency response plan or Work Safe Procedure during emergencies and/or drills.
• Perform additional duties, responsibilities, and special projects as may be directed. Carries out an inspection of the operation control instrumentation, automatic and safety devices, condition of BOP equipment;

The Toolpusher is responsible to ensure that drilling schedules are achieved in compliance with company guidelines, policies and procedures. The position liaises with client representatives and rig site leadership to achieve operational objectives and milestones. The position is responsible for all operations and departments involved with the drilling and completion of the well. Also, to ensure that all work is performed safety, efficiently and according to procedure. This position is responsible for all operations, including but not limited to, hoisting, circulating, rotating, running casing, cementing or well control. The Toolpusher takes total ownership of all operations, departments and personnel pertaining to the drilling and completion of the well.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations.
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Support and assist onsite HSE Advisor for implementing rig site surveys, safety evaluations and hazard identification (hazard hunts).
• Collaborate with HSE Advisor to ensure personnel training matrix is updated and kept current.
• Follow the client’s daily drilling plans.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Maintain records and certifications of all drill pipe, subs and tools.
• Maintain records and certifications of all BOPE.
• Ensure that Company preventive maintenance procedures are implemented and observed.
• Ensure that sling/lifting gear register is current and certifications valid, preform periodic inspections to ensure lifting gear is in good condition
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Collaborate with client drilling representative and coordinate with drill crew to accomplish optimum desired drilling conditions.
• Monitors and reviews the tracking of rotating hours on tubular/BHA/Tools.
• Collaborates with vendors and service personnel to ensure a smooth transition for scheduled operational changes.
• Ensure performance of daily checks on Well control equipment; FOSV, Kelly cock valve, IBOP, Koomey, etc.
• Ensure rig crews’ competencies are developed and sufficient to perform their duties and responsibilities.
• Manage daily rig activities to include but not limited to drilling operations, HSE concerns, supply chain support, scheduling of maintenance and personnel issues.
• Ensure all rig operations are carried out in compliance with policies and procedures while adhering to any state and/or federal regulations.
• Ensure rig staffing levels are maintained appropriately to ensure project is completed safely and efficiently.
• Attend and actively participate to contribute knowledge, guidance and recommendations at all safety, operational, or leadership meetings.
• Monitor critical inventories and coordinate with supply chain personnel to ensure that equipment, parts and materials are received appropriately.
• Ensure that scheduled preventative maintenance is completely proficiently in order to minimize operational downtime.
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Comply with platform emergency response plan or station bills during emergencies and/or drills.
• Provide guidance and support to drill crew and third party personnel when installing rig specific equipment, including but not limited to casing, cementing, wire line and completion equipment.
• Ensures that rig crew personnel are proficient in responding to well control situations.
• Maintain and disseminate information on rig equipment and drill string performance or failures.
• Collaborate with warehouse/materialman to ensure parts, materials and rig equipment are delivered proficiently
• Perform additional duties, responsibilities, and special projects as may be directed.

The Rig Superintendent position is ultimately responsible for operational efficiencies and the safety of all personnel involved with the drilling and completion of the well. The Rig Superintendent position is to ensure that drilling schedules are achieved in compliance with company guidelines, policies and procedures. The position liaises with client representatives and rig site leadership to achieve operational objectives and milestones. The position is also responsible for all operations and departments involved with the equipment commissioning, maintenance, drilling and completion of the well, including but not limited to, hoisting, circulating, rotating, running casing, cementing or well control. Also, to ensure that all associated work is preformed safety, efficiently and according to procedure. The Rig Superintendent takes total ownership of all operations, departments and personnel. This includes ensuring compliance with all company, client, state or federal rules and regulations.      

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations.
• Enforce, clarify, and follow Company and Client policies, standards and procedures.
• Monitor work sites for safety violations to pro-actively prevent accidents.
• Preform periodic engagements with rig crews and participate from commencement of job task, i.e. pre job meeting, JSA, work safe procedure reviews and after action review (AAR).
• Preform JSA audits regularly.
• Support and assist onsite HSE advisor for implementing rig site surveys, safety evaluations and hazard identification excursions (hazard hunts).
• Collaborate with HSE advisor to ensure personnel training matrix is updated and kept current.
• Preform personnel evaluations and assis t with setting goals and objectives to encourage continued performance improvement.
• Participate in interview process for hiring rig personnel, recommend promotions, and approve transfers and training requests for rig personnel.
• Follow the client’s daily drilling plans.
• Communicates daily with the Operations Manager/ Area Superintendent to review and discuss operational activities.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Parker Drilling’s Competency Program - Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency compliance is applied and followed. 
• Oversee major overhauls of rig equipment and components.
• Maintain records and certifications of all drill pipe, subs and tools.
• Maintain records and certifications of all BOPE.
• Ensure that Company preventive maintenance procedures are implemented and observed.
• Ensure that sling/lifting gear register is current and certifications valid, preform periodic inspections to ensure lifting gear is in good condition.
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Collaborate with client drilling representative and coordinate with drill crew to accomplish optimum desired drilling conditions.
• Monitors and reviews the tracking of rotating hours on tubular/BHA/Tools.
• Collaborates with vendors and service personnel to ensure a smooth transition for scheduled operational changes.
• Ensure performance of daily checks on FOSV, Kelly cock valve, IBOP, BPV.
• Ensure rig crews’ competences are developed and sufficient to perform their duties and responsibilities.
• Manage daily rig activities to include but not limited to equipment commissioning, maintenance, drilling operations, HSE concerns, supply chain support, scheduling of maintenance and personnel issues.
• Ensure all rig operations are carried out in compliance with policies and procedures while adhering to any state and/or federal regulations.
• Ensure rig staffing levels are maintained appropriately to ensure project is completed safely and efficiently.
• Attend and actively participate to contribute knowledge, guidance and recommendations at safety, operational, or leadership meetings.
• Collaborate with Rig manager regarding crew scheduling to achieve crew continuity and strengths.
• Monitor critical inventories and coordinate with supply chain personnel to ensure that equipment, parts and materials are received appropriately.
• Ensure that scheduled preventative maintenance is completely proficiently in order to minimize operational downtime.
• Responsible for periodic scheduled rig inspections and filing of all pertinent reports.
• Comply with platform emergency response plan or station bills during emergencies and/or drills.
• Provide guidance and support to drill crew and third party personnel when installing rig specific equipment, including but not limited to casing, cementing, wire line and completion equipment.
• Ensures that rig crew personnel are proficient in responding to well control situations.
• Maintain and disseminate information on rig equipment and drill string performance or failures.
• Collaborate with Platform Stores personel and Shore based Materials Coordinator to ensure parts, materials and rig equipment are delivered proficiently.
• Perform additional duties, responsibilities, and special projects as may be directed.
• Adhere to Internal Labour Conduct Code;
• Adhere to rules for labor protection and fire safety.

This position is responsible for planning, organizing, scheduling and managing daily maintenance operations and activities in assigned area.

Essential Functions:

• In coordination with Rig Manager and Maintenance personnel, arrange for availability of equipment planned maintenance.
• Directly involved in planning, developing and implementing modifications, capital repairs and improvements, recommending specifications and managing schedules for maintenance and maintenance contracts.
• Interact professionally and maintain effective working relationships with the management team to effectively meet departmental objectives.
• Coordinate activities with other rigs, programs and departments, including scheduling, coordinating and inspecting work performed by contractors.
• Respond to emergencies as requested and coordinate activities to utilize resources to affect repairs in the most expedient and cost effective manner.
• Monitor and report proper completion of al required data input including actual labor hours, comments, parts and supplies used in completing the Work Order.
• Assure conformance to all requirements of the Maintenance Management System including proper and timely completion of all work orders, unscheduled maintenance reports, failure analysis, root cause analysis and preventive measures.
• Participate in selecting third party facilities and repair services from approved vendor list as required in the region, based on Company requirements and regulatory standards.
• Write applicable maintenance procedures that promote defect-free maintenance work quality.
• Able and competent in root cause failure analysis leadership and investigations.
• Apply good stores management practices and parts management to ensure parts and equipment retain full reliability while stored.
• Schedule maintenance work into operations plan.
• Continually improving planning, scheduling, purchasing, stores, data management and job reporting systems to increase planning effectiveness and efficiency.
• Collaborate with maintenance supervision to schedule manpower and resources for the most effective production and maintenance outcomes.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the Company.
• Ensure key performance indicators are captured and reported for equipment reliability, maintenance department performance and planning and scheduling business flow process.
• Ensure that proper safety practices are followed in accordance with state and/or federal regulations and the Company’s HSE program.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

The Assistant Driller is a first line supervisor whose main duties are to direct and instruct the crew in the proper way to perform their duties and assigned tasks. This position is responsible for all operations pertaining to the drilling and completion of the well, including the circulating, rotating, hoisting, well control systems. It is the Assistant Driller’s responsibility to ensure that the work is performed safely, efficiently and according to procedure. The Assistant driller also takes total ownership of everything on the drilling location.

Essential Functions:

• Provide visible leadership with Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations during tour of duty. Assisting Driller with daily responsibilities and routinely communiticating with driller and client.
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Follow the client’s daily drilling plans.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure timely completion of accurate reports required by Company and client (including but not limited to daily drilling reports, pre-tour reports, hand-over notes, etc.).
• Update the well control board on a tourly basis.
• Maintain complete records of all tools and tubular run into the hole while drilling and/or reaming (including made up lengths, tool joints OD, ID, serial numbers).
• Track rotating hours on tubular/BHA/Tools.
• Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered and time required.
• Monitor drilling parameters and alarm systems.
• Monitor hole fill operations while tripping, logging, cutting drilling line or running casing.
• Record pickup, slack-off, rotating weights, and other drilling parameters.
• Operate drilling equipment.
• Maintain and adjust machinery in order to ensure proper and safe performance.
• Ensure floor and crown savers are function-tested and that testing results are recorded tourly.
• Ensure proper alignment of choke manifold and BOP remote console.
• Ensure performance of daily checks on FOSV, Kelly cock valve, IBOP, BPV.
• Secure well during well control events emergencies and drills.
• Install and record pressure testing of BOPE.
• Ensure rig equipment and locations are secured prior to rig moves.
• Comply with emergency response plan or Work Safe Procedures during emergencies and/or drills.
• Clean the mast and substructure with a high-pressure steam cleaning unit and/or high pressure wash gun.
• Performs scrubbing and cleaning of rig equipment and drilling packages as required with rig wash.
• Performs chipping and painting on drilling packages and equipment as required.
• Perform additional duties, responsibilities, and special projects as may be directed.

The Maintenance Supervisor is responsible to ensure that all maintenance and repairs of equipment are performed in a safe and efficient manner. The position is responsible for all drilling equipment pertaining to the drilling of the well. The position supervises onsite maintenance personnel to ensure that proper planning and scheduling of pre-determined maintenance is completed accordingly, including the availability of required parts.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude.
• Enforce, clarify, and follow Company policies, standards, and procedures while promoting operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations while ensuring the safety of those working under direct supervision.
• Coordinates with Rig Superintendent and Preventative Maintenance Coordinator on the maintenance, repair and refurbishment of equipment.
• Create applicable maintenance procedures that promote defect-free maintenance work quality.
• Responsible for reviewing, evaluating and maintaining maintenance schedules for equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Enters maintenance and repair data into a Maintenance management system (MMS)
• Provide onsite assistance and guidance to maintenance personnel with trouble shooting issues and repair.
• Monitor oil sample results and ensure recommendations are implemented onsite and reported accordingly.
• Track non-destructive testing and major maintenance to be performed at pre-determined intervals.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the company.
• Collaborate with maintenance team to schedule staffing and resources for the most effective productivity and timely completion of maintenance. Provide technical support for maintenance systems questions and problems.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all maintenance processes, procedures, and policies.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency is applied and followed
• Understand LO/TO and Permit to Work procedures.
• Maintain and update asset tags for onsite equipment.
• Maintain an adequate amount of spare parts are on hand at all times.
• Read and analyze electrical/mechanical drawings, schematics and equipment manuals.
• Perform annual assessments to evaluate performance, skills, qualifications and abilities of maintenance personnel.
• Perform additional duties, responsibilities, and special projects as may be directed.

This position is responsible for wide range of welding jobs such as Carbide Dressing, Hard Banding, Hard facing, Saw welding and general fabrication works.

Essential Functions:

• Perform all work safely and in accordance with the Company's HSE policies and procedures.
• Set-up/run RT & UT Quality Vessel Weld Processes – 3 (GMAW, FCAW, GTAW).
• Set-up/run RT Quality Pipe Weld – All Positions (6G).
• Set-up/run UT Quality Nozzle Welds – All positions (6G).
• Set-up/run Carbon Arc Gouging.
• Able to make any UT or RT Weld Repair.
• Clean and stamp all welds.
• Set-up/run all structural non-code welds.
• Know how to run all welding equipment.
• Ability to read drawings, WPS’s/PQR’s.
• Ability to lead others and plan ahead – Good.
• Knowledge of PT, MT, UT, RT methods.
• Ability to make correct decisions – Good.
• Speed of accomplishing tasks – Fast. - Ability to work safely – Best.
• Average Percent of weld repairs - <0.5%.

This position is responsible for organizing and managing the equipment, materials and supplies in the warehouse.

Essential Functions:

• Accurately maintain records on all equipment, materials supplies and spare parts in the warehouse.
• Systematically label incoming warehouse items and store appropriately in bins, boxes or containers.
• Work closely with Toolpusher, Mechanic and Electrician to ensure that adequate quantities of spare parts are readily available and that they are ordered, received and issued properly, according to the Company’s internal control procedures.
• As needed, will issue warehouse items and track returned items.
• Prepare Material Requisitions, obtain appropriate approval and forward requisition to Division Office for final approval and ordering.
• Prepare Material Receipts and Material Transfers and forward to Division Administrative Manager to ensure all items are properly accounted for.
• Take physical warehouse inventory annually and send report to Division Administrative Manager for reconciliation against accounting records.
• As appropriate, train staff in proper warehouse duties and procedures.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

1. Mampu menyusun dan mengatur data
2. Pandai mengaplikasikan Ms.Office ,Ms.Excel ,Ms.Word dsb,
3. Pandai memperbaharui basis data produk
4. Mampu mengumpulkan data-data informasi dari berbagai sumber
5. Mampu bekerja dibawah team

• Mengatur dan melakukan penjualan secara langsung secara offline(ke lapangan) dan online
• Menawarkan kepada klien tentang layanan dan penawaran perusahaan
• Menjaga hubungan dengan klien dengan memberikan dukungan dan informasi
• Menyarankan peluang baru dan solusi
• Memberikan tanggapan yang cepat terhadap pertanyaan atau penyelesaian keluhan klien
• Mencapai target penjualan
• Mengelola catatan aktivitas penjualan dan menyusun laporan penjualan
• Membantu membangun jaringan penjualan yang kuat untuk mencapai target perusahaan
• Bertanggung jawab untuk pengembangan, memperbesar dan menjaga jaringan penjualan
• Membantu dalam memberikan layanan dan mempertahankan pelanggan untuk kembali membeli jasa training
• Presentasi produk dengan detail kepada client
• Mengelola dan memprioritaskan beberapa penjualan, prospek, dan proyek secara strategis
• Menjaga hubungan baik dengan partner perusahaan

• Mengelola dan mengatur pengarsipan data perusahaan
• Memelihara dan memperbaharui database perusahaan
• Menyiapkan dan menyunting dokumen dan laporan
• Menyelesaikan pekerjaan dengan tepat waktu
• Mengelola stok persediaan barang dan melakukan pemesanan

Terapis Kecantikan / Nail Art / Hair Stylist / Terapis Reflexiologi

Kualifikasi :

• Memiliki Pengalaman bekerja di Klinik/Salon kecantikan
• Memilik Sertifikat pelatihan (yang berhubungan dengan profesinya)
• Terapis Reflexiologi berpengalaman min 2 thn
• Terbiasa melakukan perawatan kecantikan kepada client
• Mengerti produk-produk yang sesuai dengan kondisi kulit/rambut client
• Dapat mengerti Bahasa Inggris (Pasif)
• Domisili Jakarta Barat
• Berpenampilan menarik dan rapi