• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Familiar with the International code and standard such as IEC, IEEE, ANSI, NEC, NEMA

• Well known electrical basic philosophy in design (Construction design)

• Familiar with Electrical design drawing software such as 2D Auto Cad, 3D model (SP3D, PDS, PDMS)

• Familiar to use general Microsoft Word & office

• Strong mind with schedule and design quality

• Experience in using Revit Software is preferable
• Experience in using AutoCAD

• Experience in preparing steel structure drawing in EPC Project
• Capable to provide 3D Model using SP3D, AP3D and Tekla
• Experience in using AutoCAD

• Experience in preparing Drainage Drawing and details and/or foundation drawing in EPC Project.
• Capable to provide 3D Model using SP3D and AP3D.
• Experience in using AutoCAD.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Tugas & Tanggung Jawab

• Melakukan pengujian bahan baku, bahan kemas, dan produk jadi
• Melakukan analisa terhadap hasil pengujian
• Melakukan dokumentasi dan melaporkan hasil pengujian
• Melakukan maintain (Kalibrasi dan pembersihan alat ukur departemen RnD) termasuk lingkup 5R
• Melakukan pengembangan produk kosmetik, formula baru, existing dan product development
• Melakukan breakdown formula yang dibutuhkan untuk notifikasi BPOM RI
• Melakukan scale up formula untuk pengembangan produk baru
• Melakukan pendampingan proses produksi untuk produk baru
• Melakukan dokumentasi dan melaporkan hasil tahap scale up untuk pengembangan formula

Responsibilities:

-       Able to handle full set report in accounting (AP, AR, Bank, GL, Inventory)

-       Understand Indonesia taxes regulation (Income Tax)

-       Able to operate tax system e-spt is a plus

-       Able  to prepare cash flow and cash forecast

-       Understand Bank Indonesia reports

-       Having high anthusiasm for learning

-       Able to work in team

• Experience 5 years in EPC Project as Building Mechanical, Electrical, Plumbing (MEP) Designer/Drafter.
• Experience in using Revit Software is preferable.
• Experience in using AutoCAD.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable to understand piping standard drawing
• Capable to understand piping layout
• Capable to operate 2D CAD / 3D Model
• 3D Modeling tools experience (S3D, AP3D), SPR & Navis operation.
• Middle experience knowledge and expertise in Piping Design-layout, 3D modeling, P-Info dwg, isometric, piping plan drawing, MTO sketch

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

PT SEMARANG AUTOCOMP MANUFACTURING INDONESIA, sebuah perusahaan PMA Jepang yang bergerak di bidang industri komponen otomotif di Semarang,

Kami membutuhkan OPERATOR PRODUKSI yang bersedia bekerja shift, berdiri & Disiplin

Silahkan pelamar klik link system.sami.co.id

Melakukan Penawaran produk otomotif dan jasa

Tugas dan Tanggung Jawab:

• Mempersiapkan tender sesuai dengan tenggat waktu dan tanggung jawab yang ditetapkan
• Bekerja sama dengan tim tender terkait dalam mengumpulkan semua materi yang diperlukan dalam respons tender dan persyaratan spesifikasi
• Memantau pengumuman tender dan memahami proses dan dokumentasi tender secara menyeluruh
• Menyiapkan Jaminan Kinerja & Persyaratan Keamanan Penawaran

Kualifikasi :

• Lulusan Sarjana di bidang Administrasi Bisnis, Perdagangan, atau bidang terkait
• Memahami Platform CIVD SKK Migas, SMART GEP dan E-Procurement untuk seluruh K3S SKK Migas
• Memahami PTK 007 Rev 05
• Memiliki pengetahuan Local Content (TKDN)
• Mahir menggunakan MS Office Suite (Word, Excel, PowerPoint)
• Lancar berbahasa Inggris baik lisan maupun tulisan

• Operate utility boilers, generators, and compressors efficiently and safely.
• Ensure an adequate supply of steam pressure to meet operational requirements.
• Monitor and report the expiration of licenses and calibrations for equipment and personnel.
• Record and validate operating parameters to ensure compliance with standards.
• Prepare and periodically check fuel, consumables, spare parts, and service equipment.
• Provide proper care and cleaning for boiler equipment and essential operational parts.
• Adhere to occupational health and safety protocols in the work environment.
• Implement SHE practices to prevent environmental pollution (water, air, soil).
• Complete and maintain accurate data on operational activities.
• Properly use, care for, clean, and store equipment and work tools.

Kami mencari Business Manager (Team Leader) yang berpengalaman untuk memimpin dan mengawasi pekerjaan karyawan di perusahaan kami. Tugas utama adalah bertanggung jawab untuk memastikan efisiensi operasi bisnis serta menetapkan tujuan strategis kedepannya. Selain itu juga harus memiliki kompetensi memberikan bimbingan untuk peningkatan kinerja, dengan cara yang menggabungkan visi dan budaya perusahaan. Tujuannya adalah untuk memastikan profitabilitas kegiatan perusahaan kami untuk mendorong pembangunan berkelanjutan dan kesuksesan jangka panjang.

Tanggungjawab Kerja:

• Melakukan monitoring terhadap tim marketing/business partner dalam hal kinerja dan pencapaian target
• Melakukan market review dan menjalankan strategi untuk mencapai target yang ditetapkan
• Bertanggung jawab atas proses bisnis dalam hal SOP, baik secara administrasi maupun di lapangan.
• Bertanggung jawab atas portofolio cabang/point secara kualitas dan kuantitas
• Bertanggung jawab atas soliditas tim dan mampu me-manage konflik internal tim atas dasar peraturan perusahaan.

• Pendidikan terakhir minimum Diploma
• Memiliki pengalaman bertanggung jawab dalam memimpin tim min 2th
• Berpengalaman memimpin lebih dari 5-10 anggota tim
• Memiliki pengalaman min 2 tahun di Micro Finance sebagai Manager (Lembaga Keuangan Sistem Grameen diutamakan)
• Dapat menyusun strategi sales & marketing sebagai paduan tim untuk mencapai target
• Mempunyai motor dan SIM C
• Bersedia ditempatkan di seluruh wilayah Bangkalan

Kemampuan yang Dibutuhkan:

• Disiplin Tinggi (berintegritas, jujur & transparan)
• Memiliki kekuatan komunikasi & berkolaborasi dengan tim
• Memiliki semangat belajar yg tinggi terutama untuk menganalisa informasi dan data
• Mudah beradaptasi pada perubahan dan berorientasi pada target
• Mampu membangun budaya coaching untuk meningkatkan performa tim

Job Description

• Controlling the VAT Out issuance and Monthly VAT Reporting.
• Prepare Monthly Deferred Tax from Fixed Asset calculation.
• Prepare and analyze Corporate Income Tax Return calculation.
• Maintain Reconcile Balance Sheet for VAT Account.
• Update the new tax regulation and distribute it to the relevant divisions.
• Assisting or becoming the internal advisor to internal departments related to tax issues.
• Documentation and keeping all the Tax documents securely.
• Assist in obtaining the Golden Tax Certificate or other thing of tax facility.

Join our Indonesian Equity Sales team in Jakarta servicing our domestic, regional and global institutional equity clients. You will work within a

supportive and high performing team in an entrepreneurial and collaborative culture.