• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Familiar with the International code and standard such as IEC, IEEE, ANSI, NEC, NEMA

• Well known electrical basic philosophy in design (Construction design)

• Familiar with Electrical design drawing software such as 2D Auto Cad, 3D model (SP3D, PDS, PDMS)

• Familiar to use general Microsoft Word & office

• Strong mind with schedule and design quality

• Experience in using Revit Software is preferable
• Experience in using AutoCAD

• Experience in preparing steel structure drawing in EPC Project
• Capable to provide 3D Model using SP3D, AP3D and Tekla
• Experience in using AutoCAD

• Experience in preparing Drainage Drawing and details and/or foundation drawing in EPC Project.
• Capable to provide 3D Model using SP3D and AP3D.
• Experience in using AutoCAD.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Tugas & Tanggung Jawab

• Melakukan pengujian bahan baku, bahan kemas, dan produk jadi
• Melakukan analisa terhadap hasil pengujian
• Melakukan dokumentasi dan melaporkan hasil pengujian
• Melakukan maintain (Kalibrasi dan pembersihan alat ukur departemen RnD) termasuk lingkup 5R
• Melakukan pengembangan produk kosmetik, formula baru, existing dan product development
• Melakukan breakdown formula yang dibutuhkan untuk notifikasi BPOM RI
• Melakukan scale up formula untuk pengembangan produk baru
• Melakukan pendampingan proses produksi untuk produk baru
• Melakukan dokumentasi dan melaporkan hasil tahap scale up untuk pengembangan formula

• Experience 5 years in EPC Project as Building Mechanical, Electrical, Plumbing (MEP) Designer/Drafter.
• Experience in using Revit Software is preferable.
• Experience in using AutoCAD.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable to understand piping standard drawing
• Capable to understand piping layout
• Capable to operate 2D CAD / 3D Model
• 3D Modeling tools experience (S3D, AP3D), SPR & Navis operation.
• Middle experience knowledge and expertise in Piping Design-layout, 3D modeling, P-Info dwg, isometric, piping plan drawing, MTO sketch

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Melakukan Penawaran produk otomotif dan jasa

Artistic and Technical Responsibilities

• Produce high quality 2D assets and textures
• Performing graphical work assigned by producers, delegate work to your team members.

Contribution in Management

• Help supervisors with training work shop and seminars and to share knowledge and experiences.
• Possess a library of 2D references to use and to share with the art team
• Foresee future mistakes and prevent them from happening
• Produce, check and update 2D documentation

Join our Indonesian Equity Sales team in Jakarta servicing our domestic, regional and global institutional equity clients. You will work within a

supportive and high performing team in an entrepreneurial and collaborative culture.

Working directly with our Head of Research Indonesia, you will leverage your deep industry knowledge and contacts to identify exciting investment

ideas within Consumer and Retail coverage with the opportunity to explore emerging sectors. You will assist our clients to access those

opportunities by conducting market analysis, financial modelling and producing quality reports. You will engage with senior stakeholders of the

companies covered, travel to develop industry contacts when available and service the largest institutional investors in the world on a daily basis.

Given the coverage scope of the role, you’ll have the opportunity to explore highly detailed company analysis in addition to a wider, macro level

view.

A tertiary qualification in economics, finance or a similar discipline

4+ years’ relevant experience gained within sell-side research, buy-side research, investment banking or similar environments; existing

coverage in Consumer, Retail or related sectors would be an advantage

Exceptional communication skills with fluency in English and a track record of building solid relationships with international and domestic

institutional clients as well as internal teams globally

Logical and analytical lateral thinker with a passion for equity research and strong drive to succeed

Strong team ethics and the desire to work within a fast-paced environment

Tanggung Jawab Pekerjaan

• Memberikan pelatihan dibidang Teknologi Informasi dengan panduan materi yang sudah ada
• Melakukan upgrade knowledge di beberapa judul materi pelatihan
• Membantu peserta untuk menyusun rencana pelatihan lanjutan

Persyaratan

• Pendidikan minimal S1
• Memiliki pengalaman di bidang yang sama minimal 1 tahun
• Menguasai beberapa bahasa pemrograman terkini
• Memiliki passion sebagai pengajar
• Memiliki keinginan untuk terus belajar
• Sudah pernah mengajar lebih diutamakan (Bidang IT Profesional)
• Mohon mencantumkan skill yang dikuasai

Fasilitas

• Asuransi kesehatan
• Tunjangan pensiun
• Tunjangan keahlian
• Mendapat kesempatan untuk mengembangkan potensi diri
• Mendapat kesempatan mengikuti ujian sertifikasi internasional sesuai major skill
• Terdapat jenjang karir
• Fasilitas olahraga

Suasana Pekerjaan

• Memiliki tim yang solid dan humble
• Memiliki wadah untuk berbagi ilmu dalam tim
• Ada kegiatan instructor gathering
• Proses pembelajaran yang efektif dengan mengikuti sit-in class

mengoperasikan mesin produksi

mengerti cara kerja produksi

mampu bekerja dalam tekanan

mampu kerja dalam sistem shift

mampu bekerja dalam team

menyusun data keluar masuk barang

menyusun dan membuat rencana pembayaran

mengurus segala dokumen yang diperlukan oleh manager.

bisa berbahasa mandarin dan inggris.

mengikuti dan mengurus segala keperluan manager.

berpengalaman di bidangnya minimal 2 tahun.

jam kerja senen sampai sabtu.

1. Bertanggung jawab untuk menganalisis tren pasar, perilaku konsumen, dan aktivitas pesaing untuk menyempurnakan strategi komunikasi dan mengoptimalkan upaya pemasaran.
2. Melakukan riset pasar dan analisis pesaing untuk mendukung pengambilan keputusan dalam strategi pemasaran dan pengembangan produk.
3. Menyelenggarakan acara, konferensi, pameran dagang, dan inisiatif komunitas untuk terhubung dengan pelanggan, menghasilkan prospek, dan meningkatkan visibilitas merek.
4. Membangun dan memelihara kemitraan strategis dengan pihak eksternal seperti agensi pemasaran, mitra media, dan influencer industri.
5. Mengorganisasi atau mensponsori acara, konferensi, pameran dagang, dan inisiatif komunitas untuk terhubung dengan pelanggan, menghasilkan prospek, dan meningkatkan visibilitas merek.