Responsibilities:

• Perform machine installation
• Machine maintenance
• Repair machine
• Carry out analysis and problem solving
• Carry out machine quality control
• Perform functional test on the machines
• Create maintenance report
• Create a preventive maintenance schedule

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

• Menangani Keluhan Pelanggan
• Memberikan Informasi Produk atau Layanan
• Melakukan Follow-up pada Masalah Tertentu
• Mencatat Interaksi dengan Pelanggan
• Memberikan Saran dan Rekomendasi
• Menjaga Tingkat Kepuasan Pelanggan

Drafter

Some of your duties will include:

·        Responsible to utilize strong engineering tools, applicable standards and scientifically references in managing mainly but not limited environmental aspect (water, emission, energy, waste); Developing and implementing strategies to ensure the mining operations and future projects comply with all applicable environmental regulations and industry best practices, optimizing environmental performance with sustainable operation; included but not limited to engage with stakeholders, manage data, review technical documents, assist in env audit and inspection, and provide robust report.

·        To develop, support, and/or review technical standard and technical studies for new project or improvement.

·        To manage, conduct and/or support in environmental engineering projects such as energy conservation, water conservation, emission reduction, waste mitigation, reuse and reutilization

·        To be accountable for water, waste, energy, and emission inventory across project site wide

·        To conduct Life Cycle Analysis (LCA) and GHG calculation using recognized scientifically and statistical tools.

·        To conduct, coordinate, and/or support water audit and energy audit,

·        To support ESG team in preparing sustainability reports and audit (SASB, OJK, IFC, ICMM, Copper Mark)

·        To engage with internal and external stakeholders during aspect impact session, construction plan review, contractor performance review, incident investigation, audit, inspection, and government inspection.

·        Advises line management regarding regulation, data trend and evaluation. 

·        Provide required resources to manage water accounting, waste inventory, energy inventory, emission inventory.

·        Develop and ensure technical standard and procedure related with water, emission, energy, and waste comply with company and International standards (ICMM, IFC, Copper Mark etc).

·        Responsible to the material preparation in 4 aspect review for management, government, and corporate officials during weekly report, management review etc.

·        Review contractor performance and proposed plan.

·        Assist student PKL.

Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

1. Analyze and organize raw data.

2. Build data systems and pipelines.

3. Create and maintain optimal data pipeline architecture.

4. Interpret trends and patterns.

5. Conduct complex data analysis and report on results.

6. Prepare data for prescriptive and predictive modeling.

7. Build algorithms and prototypes.

8. Combine raw information from different sources.

9. Develop analytical tools and programs.

10. Collaborate with data scientists and architects on several projects.

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Responsible to support Process Operations & Maintenance in ensuring the optimal performance of mineral processing plants. This role focuses on the development, implementation, and maintenance of industrial systems and applications to enhance reliability, efficiency, and productivity across the plant.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

·        Ensure and maintain all material storage areas to comply with company policies.

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Respond to emergencies that could cause injury to personnel or loss of production.

·        Monitor and reviews cost, establishes and maintain budgets and recommends the replacement or updating of equipment

·        Develop and evaluate plans and criteria for a variety of projects and activities and devise new approaches to problems encountered.

·        Plan and conduct surveys, tests or investigations, interpret results, and prepare recommendations, summaries, schedules, and cost estimates. Meet with representatives of other departments to coordinate planning and scheduling activities.

·        Oversee new installations, including modifications and new installation, start – up /commissioning.

·        Reviews maintenance schedules and coordinates with other departments to ensure optimal equipment and plant availabilities to meet business also that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Responsible for supervising all Electrical Instrument & Process control maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections, prepare STP’s (standard task procedures) and ensure that JHA`s (job hazard analysis) are performed prior to commencement of all tasks.

·        Directly supervises the Senior Supervisor, Supervisor, instrumentation, engineer process control and foreman shift on call, also coordinate activities between his/her foreman with the planning department to ensure that scheduled maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

Ensure and maintain all material storage areas to comply with company policies

• Managing end to end development projects simultaneously, adhering to timelines, and objectives.
• Responsible for Technical Aspects and Artwork Development.
• Involving in regular meeting with Customer for development progress update  and or technical inputs.
• Communicating and collaborating with cross-functional dept, including sales, planning, and production.
• Liaising with suppliers to oversee the raw materials.
• Validating and monitoring tooling ordering from suppliers.
• Ensuring that New Product Implementation meets the defined regulation and customer requirements.
• Organizing and maintaining records of packaging specification, project documentation, and design files for future reference.
• Assisting Proof with or without Customer presence.
• Defining standard to be provide in Technical Data Sheets and Color Range Book.
• Actively involve in Tender Calculation in giving technical inputs.
• Conducting New Product Briefing as a primary guidance to execute the projects

• Dapat melakukan perawatan mold dan dies, seperti preventive, periodical mold & dies.
• Dapat menggunakan alat ukur (caliper, micrometer, dial gauge, height gauge, dan pin gauge).
• Dapat menggunakan alat machining (surface grinding, lathe, dan milling).
• Memiliki keahlian dalam membaca drawing teknik / struktur design.
• Memiliki keahlian menggunakan TIG welding / laser welding menjadi nilai tambah.
• Dapat bekerjasama secara individu dan tim, cepat belajar, dan memiliki komunikasi baik
• Dapat membuat ide kaizen/improvement, Aktifitas Safety & 5S, etc

Perawatan dan perbaikan Kelistrikan Mesin dan Industri.

• Responsible to implementing and supporting networking solution (project/maintenance)
• Deploying and inspecting IT Network Systems
• Monitoring the performance and capacity of computer systems
• Performing regular checks on network hardware or software
• Responding to network alerts and hardware malfunctions
• Diagnosing and troubleshooting network errors
• Tracking and documenting network issues and compiling incidents reports • Responding to user requests and providing network training
• Will be work in shifting with a team (24x7) 

A.  Qualifications:

• Minimum education: SMK (Vocational High School) in Electrical Engineering, D3 Electrical, or S1 Electrical Engineering
• Strong and adequate physical condition
• Maximum age of 30
• Expertise in low and high voltage electrical systems and electronic equipment
• Proficient in handling generators, main panels, electrical network installations, also create or develop electrical systems also blueprints.
• create, calculating and develop electrical schematics (wiring diagram, SLD, Electrical Block Diagram), as well as maintenance and repairs
• Able to work both in a team and individually
• Able to work under pressure
• Willing to handle tasks outside of electrical work that are part of the FEM (Facility, Equipment & Maintenance) division
• Willing to work in shifts and available for on-call duty outside of normal working hours
• Interview will be conducted online
• Male applicants only
• Must be domiciled in the Subang area, West Java (Prioritize for Pusakanagara, Sukra, Pamanukan, Compreng, Bojong, Ciasem and surrounding)

Preferred Qualifications:

• Strong understanding of electrical theory and practice
• Knowledgeable in electrical distribution panel assembly
• Proficient in using AutoCAD software
• Minimum of 3 years of experience
• Possession of a professional engineer certification or relevant professional qualification certificate is highly preferred (LSP/BNSP or equivalent)
• Basic understanding of pump control systems and plumbing
• Familiarity with IP CCTV systems, door access, and other automation systems
• Holder of a valid SIM A (driver's license)

B.  Job Description:

Responsibilities include:

• Developing and adhering to technical specifications and electrical engineering standards
• Integrating electrical systems with other systems, such as machinery or software, to ensure seamless operation
• Diagnosing electrical system faults, proposing solutions, and performing repairs
• Ensuring on-site electrical engineering practices comply with safety regulations and industry standards
• Repairing electrical panel boxes and cable connections
• Conducting regular inspections and general electrical maintenance

Design of offshore oil and gas production facilities by developing mechanical design concepts and drawings, performing mechanical calculations, reviewing and implementing mechanical design criteria, specifications, government regulations and industry codes.

Some of your duties will include:

·        Supervise routine and emergency maintenance of airport infrastructure and equipment.

·        Coordinate with maintenance teams to ensure timely repairs and upkeep.

·        Develop and implement maintenance schedules and procedures.

·        Lead security operations to ensure the safety of passengers, staff, and airport assets.

·        Collaborate with security personnel to enforce protocols and regulations.

·        Manage and train maintenance and security staff.

·        Foster a collaborative and efficient work environment.

·        Monitor performance and provide guidance to team members.

·        Develop and implement emergency response plans for various scenarios.

·        Lead response efforts during emergencies, coordinating with relevant authorities.

·        Ensure adherence to local, national, and international regulations regarding airport operations.

·        Prepare reports on maintenance and security incidents, proposing improvements as needed.

·        Liaise with government and regulatory agencies as required.

1. Melakukan survey lokasi pemasangan sistem PLTS dan memberikan laporannya kepada atasan, manajemen dan pihak distributor.
2. Menganalisa dan mendesain konstruksi system PLTS dari project potensial dan yang sedang berjalan.
3. Menyusun Bill of Quantity (BOQ) sistem PLTS.
4. Melaksanakan simulasi sistem PLTS menggunakan PVSyst dan memastikan tidak terdapat error dan hambatan lain dalam desain.
5. Membuat desain 3D dan DED detailed engineering designs (sesuai permintaan developer) pada perancangan sistem PLTS menggunakan aplikasi i.e. Sketch up dan Autocad.
6. Memastikan Instalasi PLTS sesuai rancangan yang telah di mendapat Approval dari Developer.
7. Turut terlibat dalam tahap commissioning, menyiapkan dokumen hand-over sesuai standar yang telah ditetapkan oleh developer; Melaksanakan Operation and Maintenance (O&M) sistem PLTS di proyek tersebut secara reguler paska commissioning.
8. Mengecek item dan jumlah peralatan yang akan di instalasi dan paska instalasi untuk memastikan kodisi nya layal pakai dan tepat jumlah nya.
9. Menjalankan tugas lain yang diberikan oleh atasan langsung yang berkitan dengan jabatan ini.

• Mengevaluasi efektivitas teknologi, perangkat lunak, atau peralatan dan mesin yang digunakan saat ini untuk meningkatkan produktivitas dan kualitas teknologi terkait.
• Menganalisis prosedur dan praktik yang diterapkan saat ini untuk mengidentifikasi area yang memerlukan perbaikan.
• Berkoordinasi dengan tim teknis untuk membuat atau update sistem, perangkat lunak, atau peralatan lainnya.
• Menetapkan jadwal dan deadline tim untuk setiap project agar dapat mencapai target.

Some of your duties will include:

·        Coordinate and oversee airport operations to ensure efficiency and compliance with regulations. This includes managing flight schedules, ground services, and coordination between different departments.

·        Direct aircraft movement using hand signals and communication devices.

·        Guide aircraft to and from parking positions, gates, and maintenance areas.

·        Ensure proper alignment of aircraft for safe docking and undocking.

·        Supervise and regulate movement traffic on the apron.

·        Coordinate with air traffic control, pilots, and ground staff to facilitate smooth aircraft movement.

·        Provide accurate instructions and updates regarding aircraft positioning and status.

·        To ensure the safety of the movement of people, equipment and aircraft on the apron.

·        To Analyze all activities on the apron during peak hours and plan aircraft parking arrangements in an emergency case.

·        To ensure that the facilities on the apron are in good condition.

·        To evaluate and coordinate operational activities on the apron and able to communicate with pilots in terms of regulating aircraft movement on the apron, especially for airside movement service personnel on duty in the tower.

·        Assist in the coordination of refueling, servicing, and loading/unloading of aircraft.

·        Support other ground operations tasks as needed, including the management of ground equipment.

Some of your duties will include:

• To supervise the technical aspects of operation and to give engineering level support to maintenance and operations with respect to the various Steam Systems across the smelter and at the Powerhouse area in particular, plus various Utilities Systems across the site. This will be done through in-depth analysis of machine performance, processes and output to influence condition monitoring and predictive maintenance as well as technical training to increase productivity and plant availability.

• To supervise flawless operation of the Plant Information (PI) System for plant-wide monitoring and analysis of digitized data pertaining to all process plants and associated utilities. 

• To supervise implementation of Standard Operating Procedures, and relevant statutory, safety, health and environment norms. 

• To monitor performance and enable continuous training of the technical team supporting Steam System and Utilities operation.

• To undertake the gold & silver reduction, gold and silver electro refinery, process at the Precious Metal Refinery (PMR) at Amman Mineral Industri towards the production of gold bars of stipulated purity range along with other quality specifications after subsequent processes.

• To achieve norms of productivity and learn continuously towards improvement of technical competencies and multiskilling.