PRINCIPAL RESPONSIBILITIES

Essential Functions and Responsibilities

• Support on-site staffs in giving the recommendation and good solution on any building operational problem that has occurred.
• Implement the policy and procedures and give recommendations and good solutions on any operational issues that occurred during on-site visit.
• Oversee day-to-day operations of the facility(s) or campus including janitorial, security & safety, engineering and general maintenance and helps to ensure these are carried out in a manner consistent with C&W policies and ownership directives. This includes assisting with the management of contracts and vendors
• Analyze building conditions and assigned building management resources and prepare reports setting forth progress, adverse trends and appropriate recommendations and conclusions; advise other administrative officials regarding building conditions and utilization as affected by repair/maintenance/enhancement activities.
• Developing and implementing recommendations to position the Property at its highest and best use. Preparing and presenting periodic valuations of the Property, including yield and/or rate of return analysis and five to ten years cash flow projections.
• Prepare and update plans for response to and recovery from emergency and disaster conditions in connection to the assigned project(s); lead and participate in implementation of emergency plans in appropriate situations.
• Update the benchmarking of building management information, such as service charge, rental fee, fitting out charge, overtime charge, etc.
• Ensure that the building safety, security, and healthy environment are functioned appropriately.
• Manage Schedule and coordinate meetings/special events as requested
• Any other ad hoc tasks as assigned by the company

KEY SKILLS AND CAPABILITIES

• Proven experience in project budgeting, contract negotiations and scheduling
• Excellent communication in English.
• Great attention to detail, diligent, organized, and focused.
• Committed, able to work to deadlines, prioritise and juggle between tasks.
• Business writing and reporting skills
• Commitment to quality and a thorough approach to work.
• Ability to build & maintain effective working relationships with internal and external personnel.
• Demonstrate flexibility and ability to deliver.
• Ability to produce high quality documentation (reports, specifications, requirements, etc.)
• Good team player, also able to work independently.
• Curiosity and drive to solve problems.
• Knowledge of facilities management and best practices
• Working knowledge of Microsoft Office, particularly Excel, Power Point and Word or other application  

Riverside Golf Club is seeking a dedicated Maintenance Golf Course professional to join our team. In this role, you will play a vital part in maintaining the golf course's presentation and playability, ensuring a high-quality experience for our members and guests. You will be responsible for the upkeep of the greens, fairways, and overall landscape of the course.

Responsibilities

• Plan, organize, and oversee the maintenance of the golf course to ensure top playing conditions.
• Perform routine maintenance tasks, such as mowing, aerating, and fertilizing greens and fairways.
• Inspect the course regularly for any issues or areas that require maintenance.
• Assist in the irrigation and drainage systems to ensure proper water distribution.
• Maintain equipment and machinery, executing repairs as necessary.
• Support the implementation of agronomic plans and schedule tasks to align with best practices.
• Work collaboratively with other maintenance staff to ensure efficient operation.
• Adhere to safety protocols and procedures while carrying out tasks.
• Manage budgets and procure supplies, tools, and equipment.

• Bachelor or equivalent; relevant certifications in agronomy or landscaping are a plus.
• Previous experience in golf course maintenance or landscaping preferred.
• Knowledge of turf management, irrigation systems, and general horticultural practices.
• Ability to operate and maintain various landscaping and maintenance equipment.
• Willingness to work outdoors in varying weather conditions.
• Strong work ethic with a focus on quality and attention to detail.
• Able to work flexible hours, including weekends and holidays as needed.
• Good teamwork and communication skills.
• having experience in managing people's

• Positive Working
• Great Environment
• Supportive Team Work

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Melakukan pengawasan dan control progress pekerjaan
• Mengaplikasikan dan menjabarkan rencana kerja yang dikerjakan
• Membuat dan mengendalikan preventive & corrective maintenance program harian, bulanan dan tahunan untuk pemeliharan, perbaikan mesin, peralatan dan fasilitas produksi untuk mendukung kelancaran jalannya proses produksi
• Melakukan koordinasi dengan head office untuk target penyelesaian pekerjaan
• Melakukan identifikasi, analisa mengenai perbaikan yang dilakukan
• Melakukan evaluasi, laporan dan program kerja serta improvement maintenance department.

• Mengecek sistem secara menyeluruh.
• Melakukan prosedur pencegahan kerusakan, pemeliharaan, dan perbaikan pada sistem yang dikelola perusahaan.

Some of your duties will include:

The Inspector QC Electrical & Instrumentation will oversee quality assurance and quality control activities related to electrical and instrumentation (E&I) installations within the project. The role ensures compliance with project specifications, international standards, and company requirements.

§ Inspection & Testing:

o  Conduct inspections of electrical and instrumentation systems, including cabling, grounding, power distribution, and control systems, during construction, installation, and commissioning phases.

o  Perform testing and verification of E&I equipment, such as transformers, switchgear, MCC panels, DCS/PLC systems, and field instruments.

o  Ensure compliance with design drawings, technical specifications, and applicable standards (e.g., IEC, IEEE).

§ Documentation & Reporting:

o  Review and maintain quality-related documentation, including ITPs (Inspection and Test Plans), checklists, NCRs (Non-Conformance Reports), and punch lists.

o  Prepare detailed inspection reports and submit them to the QC Manager.

§ Liaise with EPC contractors, vendors, and consultants to resolve technical issues and ensure adherence to the project quality plan; Coordinate with construction teams for timely inspections and testing activities.

§ Compliance & Standards: Ensure all electrical and instrumentation work meets health, safety, and environmental (HSE) regulations; Monitor compliance with quality assurance programs and standards, such as ISO 9001.

§ Identify and address any discrepancies or quality issues during inspections and propose corrective actions.

§ Provide technical support during root cause analysis and issue resolution.

Some of your duties will include:

·        Responsible to organize and schedule all necessary resources required to accomplish all phases of maintenance activities.

·        To organizes and schedules all necessary resources required to accomplish maintenance activities.

·        To ensures that equipment and material are available when required.

·        To ensures that necessary work history and documentation are properly organized and input into the computer history files.

• Organizes and schedules all necessary resources required to accomplish maintenance activities.
• Prepare and issue daily work schedules.
• Prepares detailed critical path plans and job cards, including equipment and materials lists for major jobs such as planned shutdowns.
• Ensures that equipment and material are available when required.
• Issues and follows up on preventative maintenance inspections and procedures.
• Ensures that necessary work history and documentation are properly organized and input into the computer history files.
• Coordinates regularly scheduled meetings with Maintenance and Operations representatives.
• Prepares weekly summary and exception reports; prepares long-term plans and schedules for review and approval.
• Prepares purchase requisitions and warehouse issue tickets.

Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

Deskripsi Pekerjaan :

- Memimpin dan mengawasi tim maintenance untuk memastikan peralatan, mesin dan fasilitas gedung beroperasi secara optimal.

- Membuat jadwal, standar operasional prosedur (SOP), dan rencana teknis pemeliharaan untuk tim maintenanc

- Melaksanakan inspeksi fasilitas untuk mengidentifikasi dan menyelesaikan masalah dengan cepat serta melakukan kegiatan preventif

- Menangani masalah teknis yang muncul dan memastikan perbaikan dilakukan dengan tepat waktu

- Membuat pengajuan pembelian barang, material, atau spare part yang dibutuhkan dalam perawatan mesin, peralatan dan fasilitas gedung serta mengontrol pemakaiannya

Kualifikasi :

- Lulusan D3/S1 Teknik Mesin, Teknik Elektro, Teknik Sipil, Arsitektur atau bidang sejenis

- Memiliki pengalaman relevan dalam bidang maintenance minimal 1 tahun

- Mampu mendiagnosis masalah dengan cepat dan menerapkan solusi yang efektif, terutama dalam situasi yang menuntut

- Kemampuan berkomunikasi secara efektif dengan tim dan pihak operasional mengenai masalah teknis dan jadwal pemeliharaan

- Mampu melakukan pemeliharaan rutin dan inspeksi untuk memastikan semua alat, mesin dan fasilitas gedung berfungsi dengan baik

- Mempunyai keahlian dan pemahaman terkait mekanikal, elektrikal, plumbing dan sipil

- Memiliki kemampuan untuk membaca gambar teknik

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

• Penanganan langsung problem mesin (mekanikal mesin).
• Patroli berkala dan pengecekan kondisi mesin.
• Preventive maintenance (cleaning, grease-up.)

Melakukan perawatan dan perbaikan mesin produksi

bit.ly/MOJIcareer

Job description:

• Prepare and maintain molds for production

• Maintain injection molding equipment and machines in good condition

• Perform daily maintenance according to the daily maintenance list

• Resolve production problems and ensure smooth production

• Assist in resolving technical problems during production

Job description:

• Proficient in mold maintenance and repair techniques

• Able to complete mold inspection and repair work independently

• Deep understanding of various mold materials and processes

• Maintain molds to ensure consistent quality, output, and results

• Complete daily mold replacement sheets and other required documents

• Identify obstacles that occur and provide solutions in the technical support section, to achieve effective and efficient production activities

• Memperbaiki dan memecahkan masalah kerusakan mekanis dan malfungsi 
• Menjaga dan mendokumentasikan catatan perbaikan mekanis 
• Memantau ketersediaan suku cadang dan mengisi kembali persediaan 
• Mengoptimalkan efisiensi mekanis dengan menyesuaikan pengaturan mesin dan peralatan 
• Bertanggung jawab terhadap kelancaran atau kondisi mesin-mesin produksi yang siap pakai 
• Berkoordinasi dengan operator produksi 
• Memberikan service mesin yang baik dan benar 
• Membuat alat bantu yang dibutuhkan dalam operasional produksi 
• Melakukan pengecekan spare part ke setiap mesin di area produksi 
• Menjaga keselamatan kerja 

Tugas dan Fungsi :

• Melaksanakan service rutin berdasarkan jadwal yang dibuat oleh manager depot
• Melakukan pengecekan terhadap seluruh fungsi unit untuk memastikan unit beroperasi dengan baik dan layak
• Menginformasikan ke manager depot bila ada sparepart yang memerlukan penggantian
• Memberikan laporan penggunaan jam kerja, laporan service dan laporan penggantian sparepart kepada manager depot
• Menangani keluhan pelanggan saat melakukan service rutin
• Menangani unit-unit callback atas perintah dari zone manager, manager depot maupun callback center
• Melakukan pekerjaan-pekerjaan perbaikan dan penggantian sparepart atas perintah dari zone manager maupun dari manager depot

Kualifikasi:

• Memiliki kemampuan komunikasi dan koordinasi yang cukup
• Memiliki pengetahuan teknis yang baik
• Memiliki SIO perawatan
• Minimal SMK/D1/D3 jurusan teknik mesin /sejenis
• Pengalaman minimal 2 tahun
• Berpengalaman di dunia elevator escalator diutamakan

• Dapat melakukan perawatan mold dan dies, seperti preventive, periodical mold & dies.
• Dapat menggunakan alat ukur (caliper, micrometer, dial gauge, height gauge, dan pin gauge).
• Dapat menggunakan alat machining (surface grinding, lathe, dan milling).
• Memiliki keahlian dalam membaca drawing teknik / struktur design.
• Memiliki keahlian menggunakan TIG welding / laser welding menjadi nilai tambah.
• Dapat bekerjasama secara individu dan tim, cepat belajar, dan memiliki komunikasi baik
• Dapat membuat ide kaizen/improvement, Aktifitas Safety & 5S, etc

Tugas & tanggung jawab

• Belajar untuk melakukan teknis pekerjaan pneumatic sistem kapal.
• Apabila mampu menguasai pekerjaan & mahir, kedepannya akan dijadikan kepala untuk tim pekerjaan pneumatic.

Perawatan dan perbaikan Kelistrikan Mesin dan Industri.