•Pendidikan Min. S1 (Diutamakan Teknik Komputer)

•Memiliki pemahaman yang baik dalam Administrasi server Window

•Memiliki Pemahaman dalam Pemrograman Wonderware Intouch

•Memiliki pengetahuan yang mendalam tentang bahasa C++: logika pemrograman, struktur data array, dan konsep OOP (pemrograman berorientasi objek), pengkodean program C#, intouch

•Administrasi, bahasa server SQL

• Prepare drawing (calculation sheet and hose) for domestic market and Malaysia market
• Prepare and check drawings (fitting, ancillary, others related to product) for domestic market and Malaysia market.
• Prepare document for design and development of hose product (planning, input, output, review, verification, validation)
• Review contract content, prepare inquiry letter for making procedure and prepare making procedure 
• Prepare and check travel card of every MH order
• Prepare travel card package (BOM, actual material cost)
• Prepare drawing list, Inspection Test Plan (ITP) and another document for customer  
• Prepare procedure related to specification, technical and process of the product and make sure in line with actual production
• Investigate the nonconformity (NN) and prepare the corrective action and preventive action to solve a problem
• Research and conduct trial to new part, new material for improvement and cost down, and coordinate with related section 

Key Responsibilities:

• Oversee management of private cloud and open-source technology services
• Ensure projects are delivered on time and within budget
• Manage client relationships and ensure customer satisfaction
• Lead and manage a team of cloud engineers and support staff
• Develop and manage project plans.

Ruang Lingkup Pekerjaan:

• Bekerja onsite dengan penjadwalan shift (L0/L1)
• Bertugas sebagai application support helpdesk dan operator aplikasi (L0)
• Melakukan koordinasi dengan IT engineer lainnya (L0/L1)
• Melakukan monitoring sistem dan troubleshoot (L1)

Essential Job Functions:

• Mapping the potential resources in the context of greenfield development.

• Assessing the technical feasibility of the wind and solar project.

• Identifying and assessing the terrain characteristics, constraint, environmental and consequently land availability aspect during development and the process of acquisition.

• Designing and maintaining the quality of wind monitoring campaign, including procurement of the required sensors.

• Assessing and analysing measurement data from both met mast and remote sensing devices (e.g., SODAR/LIDAR).

• Conducting linear/WAsP modelling (wind) and PVSyst modelling (solar) as well as the integration and justification of technical losses and uncertainty.

• Conducting technical iteration along project phases.

• Producing proper relevant maps, reports, and presentations.

• Managing and reviewing the external technical studies conducted by third party.

• Verification of the site condition in liaison with the OEM/manufacturers.

As a Manufacturing Engineer supporting the Engineering Team, you will be trusted to work at the Batam Plant. This position is responsible for the improvement of manufacturing efficiency, safety on work environment, product quality, non-conformance investigation, and CAPA.  In this role, a typical day will include:

• Identify improvement projects related to productivity and material efficiency to meet business objectives by utilizing the Lean Six Sigma concept

• Optimize manufacturing process, ensuring efficiency and quality standards are met

• Understand the failure/non-conformance investigation requirements based on International Standards, GMP/QSR US FDA, and ISO Standards

• Responsible for diagnosing problems, performing investigations and developing CAPA on related production issues

• Collaborate with cross-functional teams to troubleshoot issues and streamline processes to improve production productivity, quality, cost, and safety

• Implement Quality Control measures within Manufacturing Processes

• Responsible and accountable to ensure full compliance

• HSE implementation and performance in the Production Department. Provide support in area process responsibility for other HSE activities that are assigned by Management

WHAT YOU’LL BRING TO ALCON:

• Degree in Industrial /Mechanical Engineering or a similar field

• 1 year of experience in the Manufacturing Industry with an understanding of the manufacturing process

• Proficient in communicating in English both verbally and written

• Strong in analytical thinking, data analysis, critical thinking and problem-solving skills

• Experience in working/certified in either Green Belt or Black Belt projects will be an advantage

• Hands-on experience with MS Office and MS Excel, thorough knowledge of various kinds of office software

• Effective communication with coworkers across departments, attention to detail, ability to multitask and mentoring.

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

As a Senior Engineer Facility Utility supporting the Facilities Team, you will be trusted to work at the Batam Plant. In this role, a typical day will include:

• Understand the Project deliverables requirements based on International Standards; GMP/QSR US FDA, and ISO standards

• Deep Understanding of ISO 14644 cleanroom standard for medical device manufacturing

• Perform Coordinating, managing and investigations related to projects which may involve NCR, safety incidents and other investigations as necessary

• Manage all facility & utility activities under project such as URS, budgeting, raise PR/ PO, technical justification, prepare documents related to facility & utilities, vendor supervision, testing, commissioning as needed, end to end project management for facility & utility scopes

• Collaborate with other departments and generate technical documentation related to projects

• Facility-related projects implementation and execution within timelines and budget

• Working in accordance with the HSE Manual and documented procedures, and reporting HSE issues to the respective area owners

• Code of Conduct, HSE Policy and National HSE Standards are Implemented and respected

• Working together with Civil, electrical, utilities and clean room consultant to ensure clean room designed to meet the standard

WHAT YOU’LL BRING TO ALCON:

• Degree in Engineering (Civil, Electrical, Mechanical) or relevant field

• At least 3 years of experience working in a Pharmaceutical or Medical Device company with project transfer experience

• Knowledge of Pharmaceutical / Medical Device documentation standards (User Requirement Specification [URS], Validation Document [experience to write/prepare/ review], Change Request

• Proficient in communicating in English both verbally and written

• Experience on Automation Process Control, Automation Systems Maintenance, Equipment Maintenance, Failure Analysis, Hazards and Risk Control and Policy Management and Troubleshooting (Service and Repair) will be an advantage

• Knowledge in Microsoft Office Word, PowerPoint, Excel, Microsoft Project, AutoCad (Reading Technical drawing), 3D Modelling

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Equipment Engineer Supervisor supporting the Engineering Team, you will be trusted to work at the Batam Plant. In this role, a typical day will include:

• Responsible for providing technical support and continuous improvement in the Equipment Engineering/maintenance and ensuring the successful operation of manufacturing, safety, productivity, validation, and team goals/targets are met while in compliance to company implemented policy (internal/global Alcon quality procedure, HSE, DI, GDP, SOP, and 5S)

• Responsible for all machine PM execution and machine performance. Equipment Engineering, to coordinate with related departments to ensure all of PM can be executed as per the schedule plan with very minimum impact on productivity. Review all of PM procedures and effectiveness and efficiency

• Administer Equipment Engineering

  • Ensure proper on-site installations

  • Take charge of routine servicing teams and repair Teams

  • Assist in planning and tracking all maintenance works

  • Investigate root causes of equipment failures

• Manage Equipment Capabilities

  • Manage equipment monitoring relates to DT trending and performance

  • Implement solutions for equipment capability and monitoring

  • Manage all Preventive Maintenance should be executed as per scheduled plan with minimum impact on productivity and PM effectiveness

  • Adopt new technologies to improve the equipment system

• Confirm to management requirements

  • Enforce good safety /HSE culture and Maintenance practices

  • Maintain quality assurance systems related to equipment

  • Monitor Machines / Equipment performance data to establish good control parameter

  • Conduct technical presentations

• Contribute to Continuous Improvement

  • Lead continuous improvement projects

  • Lead working level community to explore opportunities for improvement project

• Influence Organization Development

  • Provide guidance to other

  • Develop a training program for staff

WHAT YOU’LL BRING TO ALCON:

• Degree in Engineering or relevant field

• At least 2 years of experience working in semi / full automated industrial environment as an Engineer

• Proficient in communicating in English both verbally and written

• Experience on Automation Process Control, Automation Systems Maintenance, Equipment Maintenance, Failure Analysis, Hazards and Risk Control and Policy Management and Troubleshooting (Service and Repair)

• Experience in working with the contractor and external vendor will be an advantage

• Knowledge in Microsoft office Word, Power Point, Excel, Basic Minitab, Data Trending.

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

Job Title

Job Description

Job title:
Is responsible for the development and improvement of processes, tools and equipment of the manufacturing systems, leading to predictable, reliable, stable and efficient production processes.

Your role:

• All technical aspects of industrialization activities, managing/monitoring the process capabilities of part manufacturing with secondary processes and/or product assembly.

• Work closely with cross function team of I&D, Equipment and Quality to fulfill new product requirements and come up with technical proposals towards I & D to keep manufacturing and the process robust.

• Responsible for all industrialization deliverables related to the technical aspects in the PDLM projects (process requirements, verification and validation, capability studies, work instructions, control plans, cycle time and manpower studies etc.). This includes launch and subsequent maintenance of the project.

• Plays pro-active and creative role in project team and lead technical discussions throughout the project (Design for manufacturing, assembly (manual and automated), testing).

• Identify bottlenecks/risks and initiating corrective actions by working closely with relevant functions to keep the product design simple for manufacturing and manufacturing under control with high OEE and low FOR.

• Proper handover to Operations/Production after achieving consistent results over a certain period of time.

• Troubleshooting on issues which happen during production.

You're the right fit if:

• Have experience working in Manufacturing Environment/Production Line.

• Familiar with 3D Data software (Solidworks/Unigraphics) and 2D drawings.

• Understand in Mechatronics and Automation system.

• Familiar with Engineering activities (DFM, DFA, Engineering Trial, DOE, GRnR) and Reports (PFD, PFMEA, Process Release Report, Work Instruction).

• Familiar with Problem Solving Tools/Root Cause Analysis (3C, DMAIC, Fishbone diagram, tree diagram, etc.).

• Understand Six Sigma and Statistical tool used in manufacturing (Cp-Cpk, SPC, etc).

• Good communication in English.

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

Job Title

Job Description

Job title:
Is responsible for the development and improvement of processes, tools and equipment of the manufacturing systems, leading to predictable, reliable, stable and efficient production processes.

Your role:

• All technical aspects of industrialization activities, managing/monitoring the process capabilities of part manufacturing with secondary processes and/or product assembly.

• Work closely with cross function team of I&D, Equipment and Quality to fulfill new product requirements and come up with technical proposals towards I & D to keep manufacturing and the process robust.

• Responsible for all industrialization deliverables related to the technical aspects in the PDLM projects (process requirements, verification and validation, capability studies, work instructions, control plans, cycle time and manpower studies etc.). This includes launch and subsequent maintenance of the project.

• Plays pro-active and creative role in project team and lead technical discussions throughout the project (Design for manufacturing, assembly (manual and automated), testing).

• Identify bottlenecks/risks and initiating corrective actions by working closely with relevant functions to keep the product design simple for manufacturing and manufacturing under control with high OEE and low FOR.

• Proper handover to Operations/Production after achieving consistent results over a certain period of time.

• Troubleshooting on issues which happen during production.

You're the right fit if:

• Have experience working in Manufacturing Environment/Production Line.

• Familiar with 3D Data software (Solidworks/Unigraphics) and 2D drawings.

• Understand in Mechatronics and Automation system.

• Familiar with Engineering activities (DFM, DFA, Engineering Trial, DOE, GRnR) and Reports (PFD, PFMEA, Process Release Report, Work Instruction).

• Familiar with Problem Solving Tools/Root Cause Analysis (3C, DMAIC, Fishbone diagram, tree diagram, etc.).

• Understand Six Sigma and Statistical tool used in manufacturing .(Cp-Cpk, SPC, etc.).

• Good communication in English.

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

Rentokil Initial is an international business services company employing over 35,000 colleagues across 70 countries. We strive to protect people and enhance lives,for example by controlling pests,improving hygiene and improving interior spaces with plants and scenting. We are experts in the field we operate in, investing in training, science, innovation, and technology. Listening and acting on feedback is part of our culture to support colleagues and our customers. Rentokil Initial regards equality and fairness as a fundamental right of all of its colleagues. We live our values of service, Relationships and Teamwork which were identified by our colleagues across the world.

Rentokil Pest Control is the world's leading commercial pest control company, operating in 70 countries and ranked in the top 3 in 65 of those countries. Rangking in the top 3 in 38 of the 44 countries we operate in, Initial Hygiene is the market leader who provides quality, diligent and friendly services to all customers. In France, Initial Workwear specialists in the supply and laundering of workwear, garments and protective uniforms and equipment: focusing on top quality products and services. Our plant business, Ambisius is seen as the expert in interior and exterior "landscaping"; operating across the US, Europe, Asia & Pacisifc. Steritech Branch Protection by Rentokil Initial is an industry leader and pioneer, providing innovative solutions that help customers to mitigate risks and drive business growth. We also have specialist businesses such as Medical Services, Specialist Hygiene and Property Care, which lead their respective fields. Across all of our operations globally, we have a positive reputation among our customers for our knowledge and integrity. We have central support functions of Human Resource, IT, Finance, Legal and Marketing & Innovation in the Rentokil Initial Head Office locations and in Country. Working within our function departments, you would be supporting all of our businesses.

Job Description :

1. Supervise and manage our service technician

2. Maintainance area of customers

3. Support performance service technician

4. Make a report for customer about their service

1. Candidate must possess at least a Bachelor Degree of Entomology, Environmental Health, Biology, Agrotechnology or equivalent.
2. At least 1 year(s) of working experience in the related field
3. Able to mobile and having a driving lisense
4. Good Communication and decision maker
5. Having leadership skill
6. Willing to work at Batam Branch

1. Attractive monthly base salary
2. Performance Incentive
3. Training & Development
4. Career Path