• Managing technical team capabilities report and plan
• Preparing technical support team performance reports
• Assisting the Sales team both in presales and post-sales
• Understanding customer's requirements and needs and able to provide the right solutions
• Training, mentoring, evaluating, and motivating the team
• Assign and monitor the workload, set the goals and standards, and provide feedback and guidance
• Communicate the customer needs and expectations, report the performance and issues, and coordinate the resources and solutions
• Handle complex or escalated customer complaints, troubleshoot technical problems, implement policies and procedures, and ensure compliance with quality and security standards

We are seeking a talented Cathodic Protection Technical Product Engineer to join our team at PT Southern Tristar, based in North Cikarang, West Java. As a full-timeemployee, you will play a crucial role in developing and implementing innovative cathodic protection solutions for our clients in the oil and gas and energy industries.

What you'll be doing

• Definition of Calculation methodology/ Protection method definition.
• Definition of Material and determine Environmental conditions.
• Determination of the sacrificial anode quantities / location / material (Al /Zn / Mg) for the design life of the structure.
• Determination of the impressed current system size regarding the DC source and it’s associated anode ground bed.
• Issuing of Bid Doc for Procurement use.
• Establishing bidder lists, evaluating and pre-qualifying vendors, bid assessments, audits, reviewing supplier’s documentation for compliance with client/international specifications /rules.
• Assistance during MPQT, review for approval of subcontractor documentation.
• Management of CP site survey subcontractor on site. (Supervision / Training / Installation and Testing / Commissioning, if required).
• Assist with Technical clarification when required for clarification/negotiation all division (Cathodic Protection, Bolt and Nut, Cable Support System).

Responsibilities:

• Perform machine installation
• Machine maintenance
• Repair machine
• Carry out analysis and problem solving
• Carry out machine quality control
• Perform functional test on the machines
• Create maintenance report
• Create a preventive maintenance schedule

1) Melakukan Service Pekerjaan dalam bidang perkapalan

2) Membuat Service Report

• Responsible to implementing and supporting networking solution (project/maintenance)
• Deploying and inspecting IT Network Systems
• Monitoring the performance and capacity of computer systems
• Performing regular checks on network hardware or software
• Responding to network alerts and hardware malfunctions
• Diagnosing and troubleshooting network errors
• Tracking and documenting network issues and compiling incidents reports • Responding to user requests and providing network training
• Will be work in shifting with a team (24x7) 

• Develop and provide tool / transferred toll/ back up tools to support from new toy development stage through running in production stage
• Ensure tools are running as quoted in the tool plan
• Review tool and part design for any modification
• Conduct mold trial, verify and release approval document to production.

1. Work with certain parties in Manufacturing and Regional Site to develop new product in accordance with regulation Global Regulation and International Toys Safety Regulation Standards.
2. Create quality testing standard method
3. Ensure and maintain company high level reliability on toy development to meet corporate requirement
4. Prepare certification package prior to product release to production
5. Responsible to cover some QC function to support smooth production operation.

1. Develop method and process for painted new toy production.
2. Lead for piloting new toy and ensure the process is proper based on methods, tools, layout and process buyoff.
3. Contribute on design tooling and machinery for painted part accessories of new toys to achieve
4. Improve automation technology within process engineering with focusing on safety, quality, reliability and productivity.

1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

• Design, develop, and maintain data pipelines, ETL processes, and data warehouses.
• Ensure data quality, integrity, and reliability throughout the data pipeline.
• Work with GCP services such as Google Cloud Storage, BigQuery, Dataflow, and Pub/Sub to architect and implement scalable and efficient data processing solutions.
• Monitor and troubleshoot data pipeline issues.
• Implement security and access controls to protect sensitive data and ensure compliance with data privacy regulations.
• Document data processes, data flows, and architectural decisions.

• Responsible as the first point of contact for issues raised by customers
• Troubleshoots issues regarding cloud environments
• Manage and monitor Cloud environments.
• Document issues and interactions with customers

Technical Account Manager will be responsible for managing all pre-sales projects that are customer's related.

Job Descriptions

• Manage new and existing customer request
• Assist the sales team in delivering daily proposal to client
• Monitor the on going client-related project up to finishing and documentation
• Collaborate with the related department in delivering client to product activation
• Learn for new technology related to cloud and virtualization management, migration, and deployment

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Bertanggung Jawab kepada Technical Manager & Aktivitas Technical Departement di Sangatta
• Mengendalikan & memastikan berjalannya Plan Maintenance System untuk kapal & alat berat
• Mengendalikan & mereview roster map/kerja bagi mecanic/engineer in duty setiap bulannya
• Mempersiapkan & Mengendalikan budget technical di Sangatta
• Mengendalikan perawatan kapal (LO, Part & Consumeble) serta berkomunikasi dengan Port Engineer & Mekanik
• Memonitor & mereview hasil perbaikan kapal termasuk dokumen (BAK & Foto)
• Terlibat dalam Team Tanggap Darurat
• Mereview & Menyetujui Service request dan Purchase request dari PE dan Mekanik
• Menerapkan K3 dan Lingkungan hidup di area kerja
• Mereview Jobs Safety Analysis yang dibuat Supervisor, Mekanik, Electrician dan welder

•Pendidikan Min. S1 (Diutamakan Teknik Komputer)

•Memiliki pemahaman yang baik dalam Administrasi server Window

•Memiliki Pemahaman dalam Pemrograman Wonderware Intouch

•Memiliki pengetahuan yang mendalam tentang bahasa C++: logika pemrograman, struktur data array, dan konsep OOP (pemrograman berorientasi objek), pengkodean program C#, intouch

•Administrasi, bahasa server SQL