Total 47 Engineering job vacancies in Jln Jenderal Sudirman Lintas Manggopoh Simpang Empat Pasaman Barat

Drafter

Some of your duties will include:

·        Respond to emergencies that could cause injury to personnel or loss of production.

·        Monitor and reviews cost, establishes and maintain budgets and recommends the replacement or updating of equipment

·        Develop and evaluate plans and criteria for a variety of projects and activities and devise new approaches to problems encountered.

·        Plan and conduct surveys, tests or investigations, interpret results, and prepare recommendations, summaries, schedules, and cost estimates. Meet with representatives of other departments to coordinate planning and scheduling activities.

·        Oversee new installations, including modifications and new installation, start – up /commissioning.

·        Reviews maintenance schedules and coordinates with other departments to ensure optimal equipment and plant availabilities to meet business also that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Responsible for supervising all Electrical Instrument & Process control maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections, prepare STP’s (standard task procedures) and ensure that JHA`s (job hazard analysis) are performed prior to commencement of all tasks.

·        Directly supervises the Senior Supervisor, Supervisor, instrumentation, engineer process control and foreman shift on call, also coordinate activities between his/her foreman with the planning department to ensure that scheduled maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

Ensure and maintain all material storage areas to comply with company policies

Responsibilities:

• Perform machine installation
• Machine maintenance
• Repair machine
• Carry out analysis and problem solving
• Carry out machine quality control
• Perform functional test on the machines
• Create maintenance report
• Create a preventive maintenance schedule

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Responsible to support Process Operations & Maintenance in ensuring the optimal performance of mineral processing plants. This role focuses on the development, implementation, and maintenance of industrial systems and applications to enhance reliability, efficiency, and productivity across the plant.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

·        Ensure and maintain all material storage areas to comply with company policies.

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

Some of your duties will include:

·        Responsible to utilize strong engineering tools, applicable standards and scientifically references in managing mainly but not limited environmental aspect (water, emission, energy, waste); Developing and implementing strategies to ensure the mining operations and future projects comply with all applicable environmental regulations and industry best practices, optimizing environmental performance with sustainable operation; included but not limited to engage with stakeholders, manage data, review technical documents, assist in env audit and inspection, and provide robust report.

·        To develop, support, and/or review technical standard and technical studies for new project or improvement.

·        To manage, conduct and/or support in environmental engineering projects such as energy conservation, water conservation, emission reduction, waste mitigation, reuse and reutilization

·        To be accountable for water, waste, energy, and emission inventory across project site wide

·        To conduct Life Cycle Analysis (LCA) and GHG calculation using recognized scientifically and statistical tools.

·        To conduct, coordinate, and/or support water audit and energy audit,

·        To support ESG team in preparing sustainability reports and audit (SASB, OJK, IFC, ICMM, Copper Mark)

·        To engage with internal and external stakeholders during aspect impact session, construction plan review, contractor performance review, incident investigation, audit, inspection, and government inspection.

·        Advises line management regarding regulation, data trend and evaluation. 

·        Provide required resources to manage water accounting, waste inventory, energy inventory, emission inventory.

·        Develop and ensure technical standard and procedure related with water, emission, energy, and waste comply with company and International standards (ICMM, IFC, Copper Mark etc).

·        Responsible to the material preparation in 4 aspect review for management, government, and corporate officials during weekly report, management review etc.

·        Review contractor performance and proposed plan.

·        Assist student PKL.

1. Analyze and organize raw data.

2. Build data systems and pipelines.

3. Create and maintain optimal data pipeline architecture.

4. Interpret trends and patterns.

5. Conduct complex data analysis and report on results.

6. Prepare data for prescriptive and predictive modeling.

7. Build algorithms and prototypes.

8. Combine raw information from different sources.

9. Develop analytical tools and programs.

10. Collaborate with data scientists and architects on several projects.

• Responsible to implementing and supporting networking solution (project/maintenance)
• Deploying and inspecting IT Network Systems
• Monitoring the performance and capacity of computer systems
• Performing regular checks on network hardware or software
• Responding to network alerts and hardware malfunctions
• Diagnosing and troubleshooting network errors
• Tracking and documenting network issues and compiling incidents reports • Responding to user requests and providing network training
• Will be work in shifting with a team (24x7) 

A.  Qualifications:

• Minimum education: SMK (Vocational High School) in Electrical Engineering, D3 Electrical, or S1 Electrical Engineering
• Strong and adequate physical condition
• Maximum age of 30
• Expertise in low and high voltage electrical systems and electronic equipment
• Proficient in handling generators, main panels, electrical network installations, also create or develop electrical systems also blueprints.
• create, calculating and develop electrical schematics (wiring diagram, SLD, Electrical Block Diagram), as well as maintenance and repairs
• Able to work both in a team and individually
• Able to work under pressure
• Willing to handle tasks outside of electrical work that are part of the FEM (Facility, Equipment & Maintenance) division
• Willing to work in shifts and available for on-call duty outside of normal working hours
• Interview will be conducted online
• Male applicants only
• Must be domiciled in the Subang area, West Java (Prioritize for Pusakanagara, Sukra, Pamanukan, Compreng, Bojong, Ciasem and surrounding)

Preferred Qualifications:

• Strong understanding of electrical theory and practice
• Knowledgeable in electrical distribution panel assembly
• Proficient in using AutoCAD software
• Minimum of 3 years of experience
• Possession of a professional engineer certification or relevant professional qualification certificate is highly preferred (LSP/BNSP or equivalent)
• Basic understanding of pump control systems and plumbing
• Familiarity with IP CCTV systems, door access, and other automation systems
• Holder of a valid SIM A (driver's license)

B.  Job Description:

Responsibilities include:

• Developing and adhering to technical specifications and electrical engineering standards
• Integrating electrical systems with other systems, such as machinery or software, to ensure seamless operation
• Diagnosing electrical system faults, proposing solutions, and performing repairs
• Ensuring on-site electrical engineering practices comply with safety regulations and industry standards
• Repairing electrical panel boxes and cable connections
• Conducting regular inspections and general electrical maintenance

• Mencari customer baru dan menjaga hubungan baik dengan customer
• Melakukukan presentasi produk ke customer
• Melakukan peninjauan langsung ke lapangan atau proyek yang sedang berjalan
• Membuat laporan harian atas kegiatan marketing yang dilakukan
• Bekerja sama dengan tim untuk mencapai target kerja

Some of your duties will include:

·        Capable to operate and maintain traction and equipment.

·        Repair traction and equipment and to analyze disturbances/damages and make steps to repair of it.

·        Able to plan/design the installation or change of traction equipment systems; and evaluate the performance of traction and equipment.

·        Ensure the safe, efficient, and reliable operation of mechanical systems and equipment at the airport.

·        Maintain and repair a range of mechanical systems, including but not limited to air conditioning, heating, ventilation, baggage handling systems, and various other airport machinery

·        Perform routine maintenance, inspections, and repairs on mechanical systems and equipment, including HVAC systems, baggage handling systems, escalators, elevators, and other machinery.

·        Diagnose and resolve mechanical issues promptly to minimize operational disruptions. This includes analyzing malfunction reports and performing corrective actions.

·        Ensure all maintenance activities comply with relevant safety regulations, industry standards, and airport-specific protocols. Maintain records of maintenance activities and repairs

·        Monitor and manage inventory levels of spare parts and tools. Place orders for parts and supplies as needed, ensuring that inventory is stocked and organized

·        Assist in the evaluation and implementation of system upgrades and improvements to enhance performance and reliability.

·        Able to operate and maintain water and pump system equipment.

·        Able to plan/design the installation or change of water and pump system equipment

• Mengevaluasi efektivitas teknologi, perangkat lunak, atau peralatan dan mesin yang digunakan saat ini untuk meningkatkan produktivitas dan kualitas teknologi terkait.
• Menganalisis prosedur dan praktik yang diterapkan saat ini untuk mengidentifikasi area yang memerlukan perbaikan.
• Berkoordinasi dengan tim teknis untuk membuat atau update sistem, perangkat lunak, atau peralatan lainnya.
• Menetapkan jadwal dan deadline tim untuk setiap project agar dapat mencapai target.

Some of your duties will include:

• To supervise the technical aspects of operation and to give engineering level support to maintenance and operations with respect to the various Steam Systems across the smelter and at the Powerhouse area in particular, plus various Utilities Systems across the site. This will be done through in-depth analysis of machine performance, processes and output to influence condition monitoring and predictive maintenance as well as technical training to increase productivity and plant availability.

• To supervise flawless operation of the Plant Information (PI) System for plant-wide monitoring and analysis of digitized data pertaining to all process plants and associated utilities. 

• To supervise implementation of Standard Operating Procedures, and relevant statutory, safety, health and environment norms. 

• To monitor performance and enable continuous training of the technical team supporting Steam System and Utilities operation.

• To undertake the gold & silver reduction, gold and silver electro refinery, process at the Precious Metal Refinery (PMR) at Amman Mineral Industri towards the production of gold bars of stipulated purity range along with other quality specifications after subsequent processes.

• To achieve norms of productivity and learn continuously towards improvement of technical competencies and multiskilling.

Some of your duties will include:

• To maintain the reliability, safety, and efficiency of mechanical System like rotating equipment maintenance, overhead crane maintenance, fabrication, hydraulic and utility equipment maintenance work including associated infrastructure and equipment of the Amman Mineral Industri Copper Smelter complex at Sumbawa Island in Indonesia to maximize uptime of the plant and machinery.  

• Mechanical specialists must ensure the complete copper smelter equipment maintenance on day-to-day basis as per manager/Superintendent/supervisor given task, they may be worked by hand with the help of contract crew for emergency break-down of equipment. 

• They have to do some critical assembly like critical pumps, gear boxes, RAV, hydraulic cylinder, wheel assembly, high speed compressor/blower, alignment of any rotatory equipment, and critical equipment bearing fitment. 

• To monitor the deployment and productivity of the outsourced maintenance team under jurisdiction for mechanical maintenance in compliance with all statutory, health, safety, environment norms.

Some of your duties will include:

• To oversee technical support to mechanical engineering and operations functions at the Amman Mineral Industri Copper Smelter complex at Sumbawa Island in Indonesia including the Smelters, Refinery, Sulphuric Acid Plant, Precious Metal Plant, Utilities, Raw Material Handling Plant and associated infrastructure and equipment by providing the equipment refurbishment , maintenance and equipment support to operation and maintenance team to  maximise uptime of the plant and machinery and improve sustainability.  

• To oversee inhouse repair and fabrication services at the workshop.

• To oversee mechanical maintenance of Heavy Earth Moving Machinery. 

• To oversee all statutory compliances and adherence to health, safety, environment norms with respect to the workshop and maintenance carried out within it. 

• To oversee planning, analysis and MIS with respect to mechanical engineering across operations and ensure asset optimisation.

Kualifikasi :

• Pendidikan Minimal D III Akuntansi
• Usia Maksimum 40 tahun
• Pengalaman Finance minimal 5 tahun
• Pernah bekerja di perusahaan manufacturing ( Prefer Otomotif)

Jobdesc:

- Analisa laporan Laba Rugi, Neraca dan arus kas.

- Cek dan koreksi AR AP

- Cek dan koreksi pph ppn bulanan

- Buat koreksi fiskal ketika buat SPT tahunan.

- Berpengalaman membuat Business Plan

- Berpengalaman buat laporan Simodis

- Berpengalaman buat laporan BI ULN dan LLD

Qualifications:

• Diploma / Bachelor’s Degree in Mechatronics or Automation Engineering
• Minimum 2 years’ experience
• Experience in automated industrials,production machining design controls and PLCS
• Have experience in designing spesial purpose machine
• Have experience in automation system and moving part or mechanism and electrical design
• Have a good understanding of automation standard part and material
• Have a good understanding of flowchart and circuit diagram
• Proficient using 2D/3D Cad
• Have Creativity,logic,vision,trouble shooting and problem solving skills
• Acurate,high attention to detail and a part learner

Job Description :

• Reviewing and evaluating the existing process to be automated
• Breaking down the concept into requirement and cost budgeting
• Design automation system and requirement using engineering tools until its ready to be used
• planing project time
• providing reports and documentation

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.