Total 6 service engineer job vacancies in Manufacturing / Production category in Jl. Mas Surya Negara Viii No.6 Kawasan Industri Terpadu Kabil - Batam

1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

• Prepare drawing (calculation sheet and hose) for domestic market and Malaysia market
• Prepare and check drawings (fitting, ancillary, others related to product) for domestic market and Malaysia market.
• Prepare document for design and development of hose product (planning, input, output, review, verification, validation)
• Review contract content, prepare inquiry letter for making procedure and prepare making procedure 
• Prepare and check travel card of every MH order
• Prepare travel card package (BOM, actual material cost)
• Prepare drawing list, Inspection Test Plan (ITP) and another document for customer  
• Prepare procedure related to specification, technical and process of the product and make sure in line with actual production
• Investigate the nonconformity (NN) and prepare the corrective action and preventive action to solve a problem
• Research and conduct trial to new part, new material for improvement and cost down, and coordinate with related section 

- Membantu proses loading dan unloading unit SCT 

- Mengarahkan unit SCT selama proses perpindahan dari tempat loading dan unloading

- Membantu perawatan unit SCT

As a Manufacturing Engineer supporting the Engineering Team, you will be trusted to work at the Batam Plant. This position is responsible for the improvement of manufacturing efficiency, safety on work environment, product quality, non-conformance investigation, and CAPA.  In this role, a typical day will include:

• Identify improvement projects related to productivity and material efficiency to meet business objectives by utilizing the Lean Six Sigma concept

• Optimize manufacturing process, ensuring efficiency and quality standards are met

• Understand the failure/non-conformance investigation requirements based on International Standards, GMP/QSR US FDA, and ISO Standards

• Responsible for diagnosing problems, performing investigations and developing CAPA on related production issues

• Collaborate with cross-functional teams to troubleshoot issues and streamline processes to improve production productivity, quality, cost, and safety

• Implement Quality Control measures within Manufacturing Processes

• Responsible and accountable to ensure full compliance

• HSE implementation and performance in the Production Department. Provide support in area process responsibility for other HSE activities that are assigned by Management

WHAT YOU’LL BRING TO ALCON:

• Degree in Industrial /Mechanical Engineering or a similar field

• 1 year of experience in the Manufacturing Industry with an understanding of the manufacturing process

• Proficient in communicating in English both verbally and written

• Strong in analytical thinking, data analysis, critical thinking and problem-solving skills

• Experience in working/certified in either Green Belt or Black Belt projects will be an advantage

• Hands-on experience with MS Office and MS Excel, thorough knowledge of various kinds of office software

• Effective communication with coworkers across departments, attention to detail, ability to multitask and mentoring.

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

Job Title

Job Description

Job title:
Is responsible for the development and improvement of processes, tools and equipment of the manufacturing systems, leading to predictable, reliable, stable and efficient production processes.

Your role:

• All technical aspects of industrialization activities, managing/monitoring the process capabilities of part manufacturing with secondary processes and/or product assembly.

• Work closely with cross function team of I&D, Equipment and Quality to fulfill new product requirements and come up with technical proposals towards I & D to keep manufacturing and the process robust.

• Responsible for all industrialization deliverables related to the technical aspects in the PDLM projects (process requirements, verification and validation, capability studies, work instructions, control plans, cycle time and manpower studies etc.). This includes launch and subsequent maintenance of the project.

• Plays pro-active and creative role in project team and lead technical discussions throughout the project (Design for manufacturing, assembly (manual and automated), testing).

• Identify bottlenecks/risks and initiating corrective actions by working closely with relevant functions to keep the product design simple for manufacturing and manufacturing under control with high OEE and low FOR.

• Proper handover to Operations/Production after achieving consistent results over a certain period of time.

• Troubleshooting on issues which happen during production.

You're the right fit if:

• Have experience working in Manufacturing Environment/Production Line.

• Familiar with 3D Data software (Solidworks/Unigraphics) and 2D drawings.

• Understand in Mechatronics and Automation system.

• Familiar with Engineering activities (DFM, DFA, Engineering Trial, DOE, GRnR) and Reports (PFD, PFMEA, Process Release Report, Work Instruction).

• Familiar with Problem Solving Tools/Root Cause Analysis (3C, DMAIC, Fishbone diagram, tree diagram, etc.).

• Understand Six Sigma and Statistical tool used in manufacturing (Cp-Cpk, SPC, etc).

• Good communication in English.

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

Job Title

Job Description

Job title:
Is responsible for the development and improvement of processes, tools and equipment of the manufacturing systems, leading to predictable, reliable, stable and efficient production processes.

Your role:

• All technical aspects of industrialization activities, managing/monitoring the process capabilities of part manufacturing with secondary processes and/or product assembly.

• Work closely with cross function team of I&D, Equipment and Quality to fulfill new product requirements and come up with technical proposals towards I & D to keep manufacturing and the process robust.

• Responsible for all industrialization deliverables related to the technical aspects in the PDLM projects (process requirements, verification and validation, capability studies, work instructions, control plans, cycle time and manpower studies etc.). This includes launch and subsequent maintenance of the project.

• Plays pro-active and creative role in project team and lead technical discussions throughout the project (Design for manufacturing, assembly (manual and automated), testing).

• Identify bottlenecks/risks and initiating corrective actions by working closely with relevant functions to keep the product design simple for manufacturing and manufacturing under control with high OEE and low FOR.

• Proper handover to Operations/Production after achieving consistent results over a certain period of time.

• Troubleshooting on issues which happen during production.

You're the right fit if:

• Have experience working in Manufacturing Environment/Production Line.

• Familiar with 3D Data software (Solidworks/Unigraphics) and 2D drawings.

• Understand in Mechatronics and Automation system.

• Familiar with Engineering activities (DFM, DFA, Engineering Trial, DOE, GRnR) and Reports (PFD, PFMEA, Process Release Report, Work Instruction).

• Familiar with Problem Solving Tools/Root Cause Analysis (3C, DMAIC, Fishbone diagram, tree diagram, etc.).

• Understand Six Sigma and Statistical tool used in manufacturing .(Cp-Cpk, SPC, etc.).

• Good communication in English.

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.