Total 11 maintenance repair job vacancies in Maintenance / Repair category in jlrawa sumur iii kav iii blok dd no11 kawasan industri pulogadung jakarta timur

• Penanganan langsung problem mesin (mekanikal mesin).
• Patroli berkala dan pengecekan kondisi mesin.
• Preventive maintenance (cleaning, grease-up.)

Kualifikasi Kebutuhan Teknisi Maintenance:

- Laki-laki, usia maksimal 35 tahun

- Pendidikan minimal SLTA sederajat

- Bersedia bekerja full time senin-kamis pukul 07:20 s/d 16:30 dan jum'at 07:20 s/d 17:00, sabtu minggu hari libur

- Memiliki pengalaman min 1 tahun di bidang yang sama 

-Bisa penanganan trouble shooting mesin produksi, mengerti kelistrikan industri,preventive maintenance mesin dan ulilities pabrik untuk preventive and maintenance

-- Memiliki kemampuan analisa yang baik, detail, teliti dan terbiasa bekerja secara individu maupun team

- Bersedia ditempatkan di Kawasan GIIC Blok AA Kota Deltamas-Cikarang Pusat

PT. Binayasa Putrabatara merupakan perusahaan yang bergerak dibidang building management, jasa konstruksi dan pengadaan property membutuhkan Teknisi Maintenance Gedung

Tanggung Jawab Pekerjaan :

Melakukan kegiatan perbaikan dan pemeliharaan mekanikal elektrikal, sipil, plumbing dan AC gedung

Melaksanakan pekerjaan sesuai standart yang sudah ditetapkan

Maintenance aset fisik gedung

Keahlian :

Memahami sistem kelistrikan, mekanikal, dan plumbing yang ada di gedung.

Mampu melakukan perbaikan pada peralatan dan sistem gedung, seperti AC, pemanas, dan sistem ventilasi.

Kualifikasi :

– Kandidat harus memiliki setidaknya SMA/SMK di Teknik (Elektro), Teknik (Lainnya), Teknik (Mekanikal), Teknik Sipil atau setara.

– Setidaknya memiliki 1 tahun pengalaman dalam bidang yang sesuai untuk posisi ini.

– Lebih disukai Pegawai (non-manajemen, non-supervisor) khusus dalam Teknik – Lain-lain atau setara.

– Bersedia ditempatkan diseluruh wilayah Indonesia (Jabodetabek)

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Batam

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Medan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Unit Cabang Balikpapan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

This position is responsible for planning, organizing, scheduling and managing daily maintenance operations and activities in assigned area.

Essential Functions:

• In coordination with Rig Manager and Maintenance personnel, arrange for availability of equipment planned maintenance.
• Directly involved in planning, developing and implementing modifications, capital repairs and improvements, recommending specifications and managing schedules for maintenance and maintenance contracts.
• Interact professionally and maintain effective working relationships with the management team to effectively meet departmental objectives.
• Coordinate activities with other rigs, programs and departments, including scheduling, coordinating and inspecting work performed by contractors.
• Respond to emergencies as requested and coordinate activities to utilize resources to affect repairs in the most expedient and cost effective manner.
• Monitor and report proper completion of al required data input including actual labor hours, comments, parts and supplies used in completing the Work Order.
• Assure conformance to all requirements of the Maintenance Management System including proper and timely completion of all work orders, unscheduled maintenance reports, failure analysis, root cause analysis and preventive measures.
• Participate in selecting third party facilities and repair services from approved vendor list as required in the region, based on Company requirements and regulatory standards.
• Write applicable maintenance procedures that promote defect-free maintenance work quality.
• Able and competent in root cause failure analysis leadership and investigations.
• Apply good stores management practices and parts management to ensure parts and equipment retain full reliability while stored.
• Schedule maintenance work into operations plan.
• Continually improving planning, scheduling, purchasing, stores, data management and job reporting systems to increase planning effectiveness and efficiency.
• Collaborate with maintenance supervision to schedule manpower and resources for the most effective production and maintenance outcomes.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the Company.
• Ensure key performance indicators are captured and reported for equipment reliability, maintenance department performance and planning and scheduling business flow process.
• Ensure that proper safety practices are followed in accordance with state and/or federal regulations and the Company’s HSE program.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

The Maintenance Supervisor is responsible to ensure that all maintenance and repairs of equipment are performed in a safe and efficient manner. The position is responsible for all drilling equipment pertaining to the drilling of the well. The position supervises onsite maintenance personnel to ensure that proper planning and scheduling of pre-determined maintenance is completed accordingly, including the availability of required parts.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude.
• Enforce, clarify, and follow Company policies, standards, and procedures while promoting operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations while ensuring the safety of those working under direct supervision.
• Coordinates with Rig Superintendent and Preventative Maintenance Coordinator on the maintenance, repair and refurbishment of equipment.
• Create applicable maintenance procedures that promote defect-free maintenance work quality.
• Responsible for reviewing, evaluating and maintaining maintenance schedules for equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Enters maintenance and repair data into a Maintenance management system (MMS)
• Provide onsite assistance and guidance to maintenance personnel with trouble shooting issues and repair.
• Monitor oil sample results and ensure recommendations are implemented onsite and reported accordingly.
• Track non-destructive testing and major maintenance to be performed at pre-determined intervals.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the company.
• Collaborate with maintenance team to schedule staffing and resources for the most effective productivity and timely completion of maintenance. Provide technical support for maintenance systems questions and problems.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all maintenance processes, procedures, and policies.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency is applied and followed
• Understand LO/TO and Permit to Work procedures.
• Maintain and update asset tags for onsite equipment.
• Maintain an adequate amount of spare parts are on hand at all times.
• Read and analyze electrical/mechanical drawings, schematics and equipment manuals.
• Perform annual assessments to evaluate performance, skills, qualifications and abilities of maintenance personnel.
• Perform additional duties, responsibilities, and special projects as may be directed.

1. Laki –laki
2. Lajang
3. Pendidikan SMK (Jurusan : Listrik/Elektronika/Mekatronik)
4. Pengalaman 2-5 tahun sebagai Teknisi/Maintenance
5. Memahami PLC, Pneumatic & Hidraulic
6. Bersedia tinggal di Cikarang

memelihara dan menjaga fasilitas mesin produksi serta memperbaiki, melakukan penyesuaian, atau penggantian yang diperlukan untuk mendapatkan suatu kondisi operasi produksi agar sesuai dengan perencanaan yang ada

• Do the maintenance job
• Monitoring the running of the machine
• Daily Work Report maintenance
• Guiding minor maintenance for operator
• Recommend for machine improvement
• Spareparts request