Total 28 Others/Any level Maintenance / Repair job vacancies in beringin makmur ii rawas ilir kab musi rawas utara sumatera selatan indonesia

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

• Pemeliharaan Gedung, perlengkapan dan peralatan kantor
• Memeriksa keseluruhan bangunan dan menjadwalkan perbaikan
• Melakukan instalasi listrik, kabel hingga perabotan kantor

PRINCIPAL RESPONSIBILITIES

Essential Functions and Responsibilities

• Support on-site staffs in giving the recommendation and good solution on any building operational problem that has occurred.
• Implement the policy and procedures and give recommendations and good solutions on any operational issues that occurred during on-site visit.
• Oversee day-to-day operations of the facility(s) or campus including janitorial, security & safety, engineering and general maintenance and helps to ensure these are carried out in a manner consistent with C&W policies and ownership directives. This includes assisting with the management of contracts and vendors
• Analyze building conditions and assigned building management resources and prepare reports setting forth progress, adverse trends and appropriate recommendations and conclusions; advise other administrative officials regarding building conditions and utilization as affected by repair/maintenance/enhancement activities.
• Developing and implementing recommendations to position the Property at its highest and best use. Preparing and presenting periodic valuations of the Property, including yield and/or rate of return analysis and five to ten years cash flow projections.
• Prepare and update plans for response to and recovery from emergency and disaster conditions in connection to the assigned project(s); lead and participate in implementation of emergency plans in appropriate situations.
• Update the benchmarking of building management information, such as service charge, rental fee, fitting out charge, overtime charge, etc.
• Ensure that the building safety, security, and healthy environment are functioned appropriately.
• Manage Schedule and coordinate meetings/special events as requested
• Any other ad hoc tasks as assigned by the company

KEY SKILLS AND CAPABILITIES

• Proven experience in project budgeting, contract negotiations and scheduling
• Excellent communication in English.
• Great attention to detail, diligent, organized, and focused.
• Committed, able to work to deadlines, prioritise and juggle between tasks.
• Business writing and reporting skills
• Commitment to quality and a thorough approach to work.
• Ability to build & maintain effective working relationships with internal and external personnel.
• Demonstrate flexibility and ability to deliver.
• Ability to produce high quality documentation (reports, specifications, requirements, etc.)
• Good team player, also able to work independently.
• Curiosity and drive to solve problems.
• Knowledge of facilities management and best practices
• Working knowledge of Microsoft Office, particularly Excel, Power Point and Word or other application  

• Penanganan langsung problem mesin (mekanikal mesin).
• Patroli berkala dan pengecekan kondisi mesin.
• Preventive maintenance (cleaning, grease-up.)

Tugas & tanggung jawab

• Belajar untuk melakukan teknis pekerjaan pneumatic sistem kapal.
• Apabila mampu menguasai pekerjaan & mahir, kedepannya akan dijadikan kepala untuk tim pekerjaan pneumatic.

PT. Binayasa Putrabatara merupakan perusahaan yang bergerak dibidang building management, jasa konstruksi dan pengadaan property membutuhkan Teknisi Maintenance Gedung

Tanggung Jawab Pekerjaan :

Melakukan kegiatan perbaikan dan pemeliharaan mekanikal elektrikal, sipil, plumbing dan AC gedung

Melaksanakan pekerjaan sesuai standart yang sudah ditetapkan

Maintenance aset fisik gedung

Keahlian :

Memahami sistem kelistrikan, mekanikal, dan plumbing yang ada di gedung.

Mampu melakukan perbaikan pada peralatan dan sistem gedung, seperti AC, pemanas, dan sistem ventilasi.

Kualifikasi :

– Kandidat harus memiliki setidaknya SMA/SMK di Teknik (Elektro), Teknik (Lainnya), Teknik (Mekanikal), Teknik Sipil atau setara.

– Setidaknya memiliki 1 tahun pengalaman dalam bidang yang sesuai untuk posisi ini.

– Lebih disukai Pegawai (non-manajemen, non-supervisor) khusus dalam Teknik – Lain-lain atau setara.

– Bersedia ditempatkan diseluruh wilayah Indonesia (Jabodetabek)

Tugas Pokok :

1. Melakukan pekerjaan teknisi untuk service maintenance, trouble shooting, dan overhaul
2. Melakukan pekerjaan persiapan & test commisioning (Branch & Project Support)
3. Melakukan assembly unit
4. Memberikan pelaporan hasil pekerjaan secara daily

Tugas Tambahan :

1. Bersedia melakukan perjalanan dinas ke luar kota kapanpun dibutuhkan

Responsibility:

• Bertanggung jawab terhadap penyelesaian masalah/ketidaksesuaian/kerusakan di bagian pemeliharaan mesin dan infrastruktur
• Bertanggung jawab terhadap penerapan kebijakan, peraturan & sistem yang ditetapkan perusahaan di bagian pemeliharaan mesin dan infrastruktur
• Mengevaluasi & melaporkan hasil kerja bagian pemeliharaan
• Bertanggung jawab terhadap pencapaian sasaran mutu yang ditetapkan di bagian pemeliharaan infrastruktur

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Batam

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Medan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Unit Cabang Balikpapan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

• Melakukan pemeliharaan rutin pada seluruh mesin produksi
• Melakukan perbaikan mesin produksi yang mengalami kerusakan
• Melakukan inspeksi terhadap kondisi mesin produksi
• Membuat laporan hasil kerja harian

1. Support produksi terkait kondisi dan operational equipment dia area plant dan bangunan.
2. Melakukan operasional, perawatan berkala, perbaikan, dan follow up work order pada fasilitas dan bangunan
3. Support aktivitas vendor di lingkup facility

1. Set up dan operasional mesin molding
2. Mempelajari mesin serta permasalahan yang dihadapi ketika setting dan pergantian mold
3. Inisiasiuntuk melakukan koreksi jika ditemukan masalah
4. Membuat laporan yang detail dan jelas terkain insiden yang dihadapi langsung ke superior

The Electronics Technician performs all tasks and duties of an technician discipline including but not limited to, installation or maintaining electrical control and instrumentation systems, i.e. electronics, programmable controllers, telecommunications, transmitters, and hydraulic, pneumatic systems. The Electronics Technician is responsible for all electrical and electronic instrumentation equipment pertaining to the drilling of the well, including circulating, rotating, hoisting and well control systems. The position is also responsible for uploading maintenance and repair data into a Maintenance Management System (MMS).

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Enforce, clarify, and follow Company and Client policies, standards, and procedures.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all IT discipline processes, procedures, and policies.
• Promote operational excellence through procedural discipline.
• Supervise and ensure the safety of those working under direct supervision.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed
• Ensure Client competency standards are applied and requirements followed.
• Understand LO/TO and Permit to Work procedures.
• Implement and administer computer software programs for data log and control including management of change and version controls on software.
• Read, understand and analyze drawings, schematics and equipment manuals
• Perform preventative and corrective maintenance on electrical /electronic equipment.
• Coordinate with Maintenance Lead on the maintenance, repair and refurbishment of equipment.
• Enter maintenance and repair data into the SAP Maintenance Management System (MMS)
• Create Notifications and Work Orders as required and enter into SAP maintenance system
• Ensure an adequate amount of critical instrumentation spare parts are on hand and serviceable at all times.
• Repair or replace defective or worn electrical/electronic/instrument parts.
• Troubleshoot miscellaneous electrical/electronic equipment.
• Foresee potential equipment malfunctions or failures and perform required repairs or adjustments to resolve the problem.
• Respond to emergencies as requested and coordinate onsite activities to utilize resources to facilitate repairs in the most expedient and cost effective manner.
• Splice wire with approved cutting device or cutting pliers and solder connections to fixtures, outlets and equipment.
• Test circuit connections using electrical test equipment.
• Participate with installations, repairs, troubleshooting, and maintaining high/low voltage electrical equipment. Also assist with maintenance on related devices including transformers, power panels, light fixtures, receptacles, and disconnect switches.
• Submit requisitions to Senior Toolpusher /Purchasing Coordinator for approval.
• Perform additional duties, responsibilities, and special projects as may be directed.

This position is responsible for planning, organizing, scheduling and managing daily maintenance operations and activities in assigned area.

Essential Functions:

• In coordination with Rig Manager and Maintenance personnel, arrange for availability of equipment planned maintenance.
• Directly involved in planning, developing and implementing modifications, capital repairs and improvements, recommending specifications and managing schedules for maintenance and maintenance contracts.
• Interact professionally and maintain effective working relationships with the management team to effectively meet departmental objectives.
• Coordinate activities with other rigs, programs and departments, including scheduling, coordinating and inspecting work performed by contractors.
• Respond to emergencies as requested and coordinate activities to utilize resources to affect repairs in the most expedient and cost effective manner.
• Monitor and report proper completion of al required data input including actual labor hours, comments, parts and supplies used in completing the Work Order.
• Assure conformance to all requirements of the Maintenance Management System including proper and timely completion of all work orders, unscheduled maintenance reports, failure analysis, root cause analysis and preventive measures.
• Participate in selecting third party facilities and repair services from approved vendor list as required in the region, based on Company requirements and regulatory standards.
• Write applicable maintenance procedures that promote defect-free maintenance work quality.
• Able and competent in root cause failure analysis leadership and investigations.
• Apply good stores management practices and parts management to ensure parts and equipment retain full reliability while stored.
• Schedule maintenance work into operations plan.
• Continually improving planning, scheduling, purchasing, stores, data management and job reporting systems to increase planning effectiveness and efficiency.
• Collaborate with maintenance supervision to schedule manpower and resources for the most effective production and maintenance outcomes.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the Company.
• Ensure key performance indicators are captured and reported for equipment reliability, maintenance department performance and planning and scheduling business flow process.
• Ensure that proper safety practices are followed in accordance with state and/or federal regulations and the Company’s HSE program.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

The Maintenance Supervisor is responsible to ensure that all maintenance and repairs of equipment are performed in a safe and efficient manner. The position is responsible for all drilling equipment pertaining to the drilling of the well. The position supervises onsite maintenance personnel to ensure that proper planning and scheduling of pre-determined maintenance is completed accordingly, including the availability of required parts.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude.
• Enforce, clarify, and follow Company policies, standards, and procedures while promoting operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations while ensuring the safety of those working under direct supervision.
• Coordinates with Rig Superintendent and Preventative Maintenance Coordinator on the maintenance, repair and refurbishment of equipment.
• Create applicable maintenance procedures that promote defect-free maintenance work quality.
• Responsible for reviewing, evaluating and maintaining maintenance schedules for equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Enters maintenance and repair data into a Maintenance management system (MMS)
• Provide onsite assistance and guidance to maintenance personnel with trouble shooting issues and repair.
• Monitor oil sample results and ensure recommendations are implemented onsite and reported accordingly.
• Track non-destructive testing and major maintenance to be performed at pre-determined intervals.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the company.
• Collaborate with maintenance team to schedule staffing and resources for the most effective productivity and timely completion of maintenance. Provide technical support for maintenance systems questions and problems.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all maintenance processes, procedures, and policies.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency is applied and followed
• Understand LO/TO and Permit to Work procedures.
• Maintain and update asset tags for onsite equipment.
• Maintain an adequate amount of spare parts are on hand at all times.
• Read and analyze electrical/mechanical drawings, schematics and equipment manuals.
• Perform annual assessments to evaluate performance, skills, qualifications and abilities of maintenance personnel.
• Perform additional duties, responsibilities, and special projects as may be directed.

- Min S1 from Electrical Engineering or related major

- Good in English (both speaking & writing)

- Having experience in the same field min 2 years with administrative work exposure

- Good in Microsoft Office/ Google Workspace

- Have experience in handling MV/HV Electricity

- Can work with auto CAD and read electrical drawing

- Ability to perform electricity load and capacity planning and calculation

1. Memasang semua instalasi tubing
2. Melalukan perakitan dan tata letak pipa
3. Mengontrol pipa, perlengkapan pengiriman perangkat keras dan kompenen lainnya
4. Melakukan pekerjaan instalasi dan servis di lapangan sesuai kebutuhan
5. Melakukan pengujian tekanan pada tubing dan sambungannya

• Memonitor dan bertanggungjawab atas kelancaran kegiatan yang Building & Maintenance.
• Memastikan kelayakan bangunan, baik head office maupun kantor cabang/regional/pool.
• Memastikan pengadministrasian terhadap hal-hal yang terkait dengan pemeliharaan bangunan kantor dan yang berhubungan dengan building dan ME maupun jaringan data/telp.

Uraiaan Pekerjaan:

1. Melakukan beberapa uji coba metode baru untuk produk baru berdasarkan standar yang ditentukan oleh Sika atau berdasarkan TDS atau instruksi dari R&D -QA
2. Untuk mengidentifikasi bahan pengganti yang dapat ditemukan secara lokal agar memenuhi standar produk.
3. Melakukan uji coba untuk meningkatkan kualitas produk sesuai dengan kebutuhan pelanggan.
4. Untuk membantu ahli kimia dalam mengembangkan, memproduksi, dan menggunakan produk kimia, peralatan, dan barang-barang terkait.
5. Melakukan berbagai prosedur rutin ke laboratorium secara akurat dan mengikuti metode yang ketat dalam melakukan analisis.
6. Mengembangkan atau menyempurnakan produk baru atau metode baru atau meningkatkan kualitas produk berdasarkan metode dan standar perusahaan.
7. Untuk membantu ahli kimia membuat produk akhir, memasang peralatan, dan melatih pekerja di lini produksi.
8. Melakukan uji laboratorium untuk menghasilkan data yang andal dan tepat guna mendukung penyelidikan ilmiah.
9. Mencatat dan menginterpretasikan hasil untuk dipresentasikan kepada kolega senior.
10. Melakukan pengujian dan inspeksi produk, layanan, atau proses untuk mengevaluasi kualitas atau kinerja.
11. Memberikan usulan/saran untuk beberapa modifikasi prosedur produksi untuk memenuhi kebutuhan produk.
12. Menguji bahan baku, metode, dan produk jadi untuk memastikan memenuhi standar.

MELAKUKAN PERAWATAN PADA PERALATAN/ASET PERUSAHAAN, ALAT KELISTRIKAN, TELEPON, FORKLIFT, HAND PALLET UNTUK MENDUKUNG OPERASIONAL PERUSAHAAN