Total 17 site engineer job vacancies in Others category in jl perusahaan barat no17 tunjungtirto singosari malang

Mempunyai wawasan yang luas serta memahami lingkup pekerjaan yang dikerjakan.

Mengerti struktur

Menguasai pekerjaan lapangan

Memahami BQ

Mengerti gambar desain

Mengerti teknikal

• Following the kick of meeting with Sales Department, production, customers, and the Project Coordinator before starting the project.
• Receive technical documents from the Application Engineer and sales during the kick of meeting and implementation for project execution.
• Able to Conduct and lead the engineering phase until the engineering output (BOM and Drawing) is released.
• Able to Conduct and lead the preparation of inspections and test plans with the Quality Engineer.
• Become a company representative for every technical meeting and discussion with customers.
• Conducting site survey before the project is executed and issue an installation plan on sites.
• Become a commissioning test team, and record commissioning results for handover to customers/Operations.
• Recapitulation of inspection/test result documents into Fabrication Data Records in collaboration with Quality control and Application Engineers.
• Performing FAT at the vendor's facility before sending equipment to the Company.
• Perform technical coordination and manage vendors in technical terms.
• Become a Problem-Solving team if there is a problem with the equipment and systems supplied to the customer.
• Overseeing engineering for project execution from the initial handover at the kick of meeting to Commissioning and Handover.

Some of your duties will include:

·        Responsible to utilize strong engineering tools, applicable standards and scientifically references in managing mainly but not limited environmental aspect (water, emission, energy, waste); Developing and implementing strategies to ensure the mining operations and future projects comply with all applicable environmental regulations and industry best practices, optimizing environmental performance with sustainable operation; included but not limited to engage with stakeholders, manage data, review technical documents, assist in env audit and inspection, and provide robust report.

·        To develop, support, and/or review technical standard and technical studies for new project or improvement.

·        To manage, conduct and/or support in environmental engineering projects such as energy conservation, water conservation, emission reduction, waste mitigation, reuse and reutilization

·        To be accountable for water, waste, energy, and emission inventory across project site wide

·        To conduct Life Cycle Analysis (LCA) and GHG calculation using recognized scientifically and statistical tools.

·        To conduct, coordinate, and/or support water audit and energy audit,

·        To support ESG team in preparing sustainability reports and audit (SASB, OJK, IFC, ICMM, Copper Mark)

·        To engage with internal and external stakeholders during aspect impact session, construction plan review, contractor performance review, incident investigation, audit, inspection, and government inspection.

·        Advises line management regarding regulation, data trend and evaluation. 

·        Provide required resources to manage water accounting, waste inventory, energy inventory, emission inventory.

·        Develop and ensure technical standard and procedure related with water, emission, energy, and waste comply with company and International standards (ICMM, IFC, Copper Mark etc).

·        Responsible to the material preparation in 4 aspect review for management, government, and corporate officials during weekly report, management review etc.

·        Review contractor performance and proposed plan.

·        Assist student PKL.

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Responsible to support Process Operations & Maintenance in ensuring the optimal performance of mineral processing plants. This role focuses on the development, implementation, and maintenance of industrial systems and applications to enhance reliability, efficiency, and productivity across the plant.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

·        Ensure and maintain all material storage areas to comply with company policies.

Some of your duties will include:

·        Respond to emergencies that could cause injury to personnel or loss of production.

·        Monitor and reviews cost, establishes and maintain budgets and recommends the replacement or updating of equipment

·        Develop and evaluate plans and criteria for a variety of projects and activities and devise new approaches to problems encountered.

·        Plan and conduct surveys, tests or investigations, interpret results, and prepare recommendations, summaries, schedules, and cost estimates. Meet with representatives of other departments to coordinate planning and scheduling activities.

·        Oversee new installations, including modifications and new installation, start – up /commissioning.

·        Reviews maintenance schedules and coordinates with other departments to ensure optimal equipment and plant availabilities to meet business also that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Responsible for supervising all Electrical Instrument & Process control maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections, prepare STP’s (standard task procedures) and ensure that JHA`s (job hazard analysis) are performed prior to commencement of all tasks.

·        Directly supervises the Senior Supervisor, Supervisor, instrumentation, engineer process control and foreman shift on call, also coordinate activities between his/her foreman with the planning department to ensure that scheduled maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

Ensure and maintain all material storage areas to comply with company policies

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

Mempersiapkan alat atau mesin produksi agar sesuai dengan proses yang direncanakan.

Deskripsi Pekerjaan:

1. Memastikan proses penjualan sesuai dengan SOP
2. Memastikan target penjualan

Some of your duties will include:

• To supervise the technical aspects of operation and to give engineering level support to maintenance and operations with respect to the various Steam Systems across the smelter and at the Powerhouse area in particular, plus various Utilities Systems across the site. This will be done through in-depth analysis of machine performance, processes and output to influence condition monitoring and predictive maintenance as well as technical training to increase productivity and plant availability.

• To supervise flawless operation of the Plant Information (PI) System for plant-wide monitoring and analysis of digitized data pertaining to all process plants and associated utilities. 

• To supervise implementation of Standard Operating Procedures, and relevant statutory, safety, health and environment norms. 

• To monitor performance and enable continuous training of the technical team supporting Steam System and Utilities operation.

Some of your duties will include:

·        Manage and protect the reputation of the company.

·        Understand the company's health benefits, insurance policies, and referral system.

·        Reading procedures, flow process, and guidelines, including regulations & best practices, to ensure that clinic operations & site health programs meet the qualities of the COMPANY expectations

·        Consistently meets or exceeds expectations for departmental standards related to Quality, Service Level, Call Goal, and other KPIs.

·        Liaise with other departments and sections, including external parties, e.g., hospitals and insurance companies, to ensure the proper site referral system.

·        Coordinate, supervise, monitor, and maintain ongoing tracking and appropriate documentation on all steps of the referral process.

·        Receive visiting employees/dependents and provide them with necessary assistance.

·        Discuss with the referral patient by email, telephone, WhatsApp, face-to-face, or other applicable recognized media by the company and provide information.

·        Provides information on the claim process, policy changes, benefits, and payment modes/methods

·        Maintain strong clientele relationships with employees and dependents.

·        Take calls from patients and in charge of offering necessary assistance to employees and dependents.

·        Analyze employees' and dependents' complaints, communicate, escalate, and communicate.

·        Record all conversations with patients, including details of inquiries or complaints (managing database) and action steps.

·        Recommending any necessary adjustments and changes in all business flow processes, including procedures & guideline

·        Keep accurate documentation, perform analysis (including maintaining the available database) & create a report for the medical advisor.

Assist health advisor/manager in monitoring the quality aspects of a site referral program.

PT Sentratek Adiprestasi adalah Perusahaan di bidang industri heavy-duty yang mendalami alat penanganan mekanis untuk memindahkan barang dalam jumlah besar atau biasa disebut dengan conveying system (sistem pengangkutan). Sudah lebih dari 35 tahun Perusahaan kami berkembang dan mengalami peningkatan yang signifikan. Guna memenuhi kepuasan pelanggan dan memastikan kualitas yang stabil kami mencari kandidat yang berkompeten untuk bergabung bersama kami.

Tanggung Jawab

1. Mampu melakukan presentasi product maupun project.
2. Aktif melakukan customer visit untuk mencari tahu kebutuhan customer, mencari data dan membina hubungan yang mendalam.
3. Melakukan kegiatan sales mulai dari penawaran, proses marketing, tender (Mengetahui doc CSMS), dan penjualan.
4. Mampu menganalisa pasar.
5. Dapat membuat rencana kerja dengan Baik.
6. Teliti, Jujur, Semangat tinggi & Disiplin.
7. Mengikuti Perkembangan Teknologi Marketing.
8. PENEMPATAN JAKARTA

PT Sentratek Adiprestasi adalah Perusahaan di bidang industri heavy-duty yang mendalami alat penanganan mekanis untuk memindahkan barang dalam jumlah besar atau biasa disebut dengan conveying system (sistem pengangkutan). Sudah lebih dari 35 tahun Perusahaan kami berkembang dan mengalami peningkatan yang signifikan. Guna memenuhi kepuasan pelanggan dan memastikan kualitas yang stabil kami mencari kandidat yang berkompeten untuk bergabung bersama kami.

Tanggung Jawab

1. Mampu melakukan presentasi product maupun project.
2. Aktif melakukan customer visit untuk mencari tahu kebutuhan customer, mencari data dan membina hubungan yang mendalam.
3. Melakukan kegiatan sales mulai dari penawaran, proses marketing, tender (Mengetahui doc CSMS), dan penjualan.
4. Mampu menganalisa pasar.
5. Dapat membuat rencana kerja dengan Baik.
6. Teliti, Jujur, Semangat tinggi & Disiplin.
7. Mengikuti Perkembangan Teknologi Marketing.
8. PENEMPATAN SURABAYA.

• Melaksanakan tugas dan fungsi sebagai Field Doctor di lokasi migas
• Mendukung Pelayanan medis dilokasi dalam melakukan stabilisasi dan proses Medical Evakuasi dalam kasus tertentu
• Mendukung Implementasi Program Kesehatan Kerja dilokasi kerja
• Minimal 1 tahun bekerja dilokasi migas
• Tugas-tugas lain yang terkait dengan tugas Utama dan dapat dipertanggung jawabkan.

Some of your duties will include:

·        Responsible maintain fire protection equipment in Port Site area that consist of camp, offices, mess hall, sport-recreational facilities, fuel storage tanks, power plant, filter plant, ship loading, jetties, hangar, electrical rooms, transformers, warehouse, and laydowns.

·        To manage company objectives and all applicable regulation and standard obligations for Fire Protection, with reporting, compliance, and other statutory requirements.

·        To be accountable for the execution of plans in each of these functions and responsible for preventive maintenance.

·        To ensure inspection, test, and preventive maintenance procedures conducted by subordinates are done according to applied standard.

·        To conduct coordination Fire Protection Preventive Maintenance activities with related stakeholders and other F&S Respective Sections

·        To communicate & coordinate with safety & Fire Emergency Services during inspection, test, and preventive maintenance activities to assure all Fire Protection System are functional properly.

·        Maintain the performance and quality of fire protection equipment according to standards without neglect the building architecture based on company’s commercial building regulations.

·        Conduct Building Fire Protection Equipment Inspection, Test & Preventive Maintenance on townsite area.

·        Systems that include in Inspection, Test & Preventive maintenance are Portable Fire Extinguisher, Smoke Alarm, Fire Alarm System, Aspirating Smoke Detection System, Water Based Fire Protection System , Gas Fire Suppression System, Fire Pump.

·        Coordinate with Corrective maintenance team for Fire Protection equipment impairment or break down.

·        Coordinate with planner to ensure all Preventive maintenance requirements are well prepared.