Total 88 job vacancies in alas sumbawa

Tanggungjawab Kerja:

1. Melakukan monitoring terhadap tim marketing/business partner dalam hal kinerja dan pencapaian target

2. Melakukan market review dan menjalankan strategi untuk mencapai target yang ditetapkan

3. Bertanggung jawab atas proses bisnis dalam hal SOP, baik secara administrasi maupun di lapangan.

4. Bertanggung jawab atas portofolio cabang/point secara kualitas dan kuantitas

5. Bertanggung jawab atas soliditas tim dan mampu me-manage konflik internal tim atas dasar peraturan perusahaan.

Kualifikasi

1. Pendidikan terakhir minimum Diploma

2. Memiliki pengalaman bertanggung jawab dalam memimpin tim min 2th

3. Berpengalaman memimpin lebih dari 5 orang

4. Memiliki pengalaman min 2 tahun di Micro Finance sebagai Manager (Lembaga Keuangan Sistem Grameen diutamakan)

5. Dapat menyusun strategi sales & marketing sebagai paduan tim untuk mencapai target

6. Mempunyai motor untuk digunakan bekerja

7. Dapat bergabung secepatnya

Benefit :

1. Hari Kerja Senin s.d Jumat (Sabtu & Minggu Libur)

2. Penghasilan Tetap

3. Insentif (Berdasarakan Pencapaian)

4. Cuti (Setelah menyelesaikan kontrak Pertama)

5. Bantuan Pernikahan, Lahiran, Keguguran, Kedukaan, Bencana Alam & Logam Mulia Setiap Kelipatan Lima Tahun Masa Kerja

6. Pengangkatan Tetap & Jenjang Karir

Benefit Lainnya

1. Kesempatan Umroh (Best Perform)

2. THR & Bonus Kinerja Tahunan

3. Asuransi Kehilangan Kendaraan (S&K Berlaku)

4. Program Pinjaman Karyawan (Posisi TL Plafon Pinjaman Min 10 Juta s.d 20 Juta, S&K Berlaku)

5. Benefit Lahiran Normal 10 Juta, Benefit lahiran Caesar 20 Juta, Baby Gift 500 Ribu, Benefit Keguguran 1 Juta

6. Sumbangan Pernikahan 500Ribu & Papan Bunga Seharga 500Ribu

7. Sumbangan Kedukaan (Keluarga Inti)

Responsibility:

• Data Analysis of the plant operations, Business Peers, Cost Reports, 
• Carry out benchmarking for the plant operations with Copper smelting peer plants and identify areas of improvement. 
• Carry out regular plant visit, attend production meetings and present the finding of the data analysis and suggest potential solution. 
• Preparation of the Budgets 
• Prepare the Business Presentation 
• PPC (Production planning & control) 
• Co-ordination with Dept of the Plant about production planning
• Compiles, sorts, and organizes data in preparation for subsequent analysis.
• Identifies and resolves any data quality issues by conducting both routine and ad-hoc data cleaning and testing.
• Uses a range of business intelligence and data analysis tools to provide analysis and reports within a comparatively structured reporting framework.
• Applies statistical and / or data visualization techniques.
• Collaborates with internal and / or external stakeholders to understand business and technical requirements and develops routine and ad-hoc reports and dashboards in line with these requirements. 
• Prepares and presents interpretation of findings to internal and / or external clients.

• Memastikan seluruh KPI Cabang di lingkup Area dapat dicapai dengan baik
• Memastikan kualitas dan kuantitas portofolio berkembang sesuai dengan tujuan dan sasaran yang ditetapkan oleh Amartha
• Memastikan proses perekrutan, pelayanan dan pendampingan mitra dilakukan sesuai dengan SOP dan
• Memastikan strategi, pengelolaan, proses dan operasional seluruh cabang dalam lingkup area yang dibina
• Memastikan keseluruhan administrasi kantor cabang lengkap dan tertib.
• Memastikan operasional kantor cabang dapat berjalan dengan baik dengan memastikan perizinan, infrastruktur, inventaris terpenuhi.
• Memastikan bahwa kebijakan dan prosedur secara ketat ditaati oleh semua staf di kantor cabang
• Memastikan seluruh staf memberikan kinerja terbaik dengan memperoleh training, pemantauan kinerja dan pengelolaan konflik.
• Memastikan operasional cabang di Regionalnya dapat berjalan melalui pemenuhan dan pengelolaan SDM
• Memastikan ekspansi yang ditetapkan Amartha dapat berjalan dengan baik
• Memastikan kualitas portfolio sesuai dengan tujuan Amartha dan nilai audit cabang sesuai dengan ekspekstasi management.
• Menegakkan prinsip keterbukaan di cabang

• Pendidikan terakhir minimum Diploma
• Memiliki pengalaman bertanggung jawab dalam memimpin minimal 2 Cabang
• Berpengalaman memimpin lebih dari 5-10 anggota tim
• Memiliki pengalaman minimal 2 tahun di Micro Finance sebagai Koordinator/Supervisor/Kepala Cabang/Area Manager
• Dapat menyusun strategi sales & marketing sebagai paduan tim untuk mencapai target
• Mempunyai motor dan SIM C
• Bersedia ditempatkan di area Sumbawa

• Penghasilan tetap dan insentif
• Asuransi Kendaraan
• Motorcycle Service Allowance
• Bantuan pernikahan dan melahirkan
• Asuransi Kesehatan
• Benefit Umroh
• Flexibel benefit
• Bonus tahunan

Some of your duties will include:

The Superintendent Mills will oversee the construction, commissioning, and operational readiness of the expanded milling circuit as part of the mineral processing plant capacity expansion. The role will require close collaboration with engineering, procurement, construction, and operations teams to ensure successful project execution.

Project Execution and Management:

• Lead and coordinate all milling-related activities during the EPC project lifecycle.
• Supervise the installation, commissioning, and testing of milling equipment and related systems.
• Ensure adherence to project schedules, budgets, and quality standards.

Technical Oversight:

• Provide technical guidance on milling processes and equipment, including SAG mills, ball mills, and related auxiliary systems.
• Review and approve technical designs, specifications, and vendor documentation.
• Identify potential technical risks and implement mitigation strategies.

Operational Readiness:

• Develop commissioning and start-up plans for the milling circuit.
• Train and mentor operational staff to ensure a seamless transition from project to operations.
• Collaborate with the process optimization team to meet throughput, recovery, and product quality targets.

Stakeholder Management:

• Act as a key liaison between the EPC contractor, vendors, and site teams.
• Provide regular progress updates to senior management and other stakeholders.

Promote and enforce HSE best practices in all milling-related project activities; Ensure compliance with site and regulatory standards.

Some of your duties will include:

The Supervisor Scaffolding will oversee and ensure the safe and efficient erection, modification, and dismantling of scaffolding structures for the Process Expansion Project in a mineral processing plant. This includes coordinating with engineering, construction, and safety teams to meet project schedules and safety standards. The role also involves leading a team of scaffolding workers to execute tasks aligned with project specifications and regulatory requirements.

§  Interpret construction drawings, blueprints, and project specifications to develop scaffolding requirements.

§ Plan and allocate manpower, materials, and equipment for scaffolding works.

§ Coordinate with project managers, engineers, and contractors to integrate scaffolding activities into the project timeline.

§ Supervise and manage scaffolding erection, modification, and dismantling on-site; Conduct routine inspections to ensure structural stability, compliance, and quality; Provide technical guidance to scaffolding teams to address challenges during installation or modifications.

§ Enforce strict adherence to company and regulatory safety standards (e.g., OSHA, local mining regulations); Identify and mitigate potential hazards related to scaffolding activities; Conduct toolbox talks and safety briefings for scaffolding teams.

§ Documentation and Reporting: Maintain accurate records of scaffolding inspections, incident reports, and safety audits; Prepare daily progress reports and submit them to the Construction Manager; Ensure inventory of scaffolding materials and equipment is well-maintained and documented.

§ Train workers in scaffolding techniques, safety practices, and the proper use of tools.

§ Foster a collaborative and productive work environment among scaffolding crews.

Some of your duties will include:

The Inspector QC Electrical & Instrumentation will oversee quality assurance and quality control activities related to electrical and instrumentation (E&I) installations within the project. The role ensures compliance with project specifications, international standards, and company requirements.

§ Inspection & Testing:

o  Conduct inspections of electrical and instrumentation systems, including cabling, grounding, power distribution, and control systems, during construction, installation, and commissioning phases.

o  Perform testing and verification of E&I equipment, such as transformers, switchgear, MCC panels, DCS/PLC systems, and field instruments.

o  Ensure compliance with design drawings, technical specifications, and applicable standards (e.g., IEC, IEEE).

§ Documentation & Reporting:

o  Review and maintain quality-related documentation, including ITPs (Inspection and Test Plans), checklists, NCRs (Non-Conformance Reports), and punch lists.

o  Prepare detailed inspection reports and submit them to the QC Manager.

§ Liaise with EPC contractors, vendors, and consultants to resolve technical issues and ensure adherence to the project quality plan; Coordinate with construction teams for timely inspections and testing activities.

§ Compliance & Standards: Ensure all electrical and instrumentation work meets health, safety, and environmental (HSE) regulations; Monitor compliance with quality assurance programs and standards, such as ISO 9001.

§ Identify and address any discrepancies or quality issues during inspections and propose corrective actions.

§ Provide technical support during root cause analysis and issue resolution.

Some of your duties will include:

Responsible to oversee all aspects of contract management for the Process Expansion Project. This role is pivotal in ensuring compliance, mitigating risks, and maintaining strong relationships with contractors and suppliers during the expansion of the mineral processing plant. The successful candidate will coordinate closely with project stakeholders to ensure contractual obligations align with project timelines, budgets, and standards.

Contract Administration:

• Draft, review, and manage contracts related to engineering, procurement, and construction (EPC) phases.
• Ensure compliance with company policies, project requirements, and regulatory standards.
• Maintain accurate records of all contractual correspondence and documentation.

Contract Negotiation:

• Support negotiations with contractors, suppliers, and vendors to secure favorable terms and resolve disputes.
• Assess and advise on potential risks in contracts and recommend mitigation strategies.

Monitoring and Compliance:

• Track contract performance and adherence to project timelines and deliverables.
• Conduct audits to ensure compliance with contractual terms and conditions.
• Prepare reports for management detailing contract performance and any deviations.

Claims and Change Management:

• Identify, assess, and manage claims, variations, and change orders.
• Coordinate with legal and financial teams to resolve disputes efficiently.

Stakeholder Coordination:

• Act as the primary point of contact for contract-related issues between project management, legal, procurement, and external contractors.
• Facilitate regular progress meetings to ensure alignment on contract execution.

Some of your duties will include:

·        Responsible to ensuring the cost efficiency and financial control of the EPC project for expanding the mineral processing plant's capacity, especially to support the fabricated steel sections. The QS will oversee project cost estimation, budget control, progress valuation, and ensure compliance with contract terms and specifications to support in measurement of the fabricated steel sections at the steel fabricators premises.

·        Cost Estimation & Planning

o  Prepare detailed cost estimates for materials, labor, and equipment required for the project.

o  Develop, monitor, and update project budgets based on project scope and changes.

o  Collaborate with the engineering, procurement, and construction teams to ensure cost-effective solutions.

·        Contract Management

o  Review, evaluate, and manage contracts, ensuring compliance with project specifications and client requirements.

o  Administer and assess variations, claims, and contractual changes.

o  Ensure proper documentation and records of all contractual agreements and transactions.

·        Measurement & Valuation

o  Conduct quantity take-offs from engineering drawings and specifications.

o  Measure and verify work progress to support interim payment applications.

o  Prepare and certify subcontractor payments based on actual work completed.

·        Cost Control & Reporting

o  Track and monitor project costs against the approved budget, identifying variances.

o  Provide regular financial and progress reports to the project management team.

o  Suggest cost-saving measures without compromising quality or schedule.

·        Risk Management

o  Identify cost-related risks and propose mitigation measures.

o  Manage unforeseen expenses or scope changes within approved limits.

·        Collaboration & Communication

o  Liaise with internal and external stakeholders, including engineers, procurement teams, contractors, and client representatives.

o  Conduct periodic site visits to monitor progress and ensure compliance with the budget.

Some of your duties will include:

·        Respond to emergencies that could cause injury to personnel or loss of production.

·        Monitor and reviews cost, establishes and maintain budgets and recommends the replacement or updating of equipment

·        Develop and evaluate plans and criteria for a variety of projects and activities and devise new approaches to problems encountered.

·        Plan and conduct surveys, tests or investigations, interpret results, and prepare recommendations, summaries, schedules, and cost estimates. Meet with representatives of other departments to coordinate planning and scheduling activities.

·        Oversee new installations, including modifications and new installation, start – up /commissioning.

·        Reviews maintenance schedules and coordinates with other departments to ensure optimal equipment and plant availabilities to meet business also that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Responsible for supervising all Electrical Instrument & Process control maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections, prepare STP’s (standard task procedures) and ensure that JHA`s (job hazard analysis) are performed prior to commencement of all tasks.

·        Directly supervises the Senior Supervisor, Supervisor, instrumentation, engineer process control and foreman shift on call, also coordinate activities between his/her foreman with the planning department to ensure that scheduled maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

Ensure and maintain all material storage areas to comply with company policies

Some of your duties will include:

·        Provide maintenance engineering & reliability engineering service within process maintenance department

·        Monitor departmental results, identify opportunities for improvement & work closely with frontline staff to initiate changes.

·        Manage the Change Management process to ensure compliance, provide engineering input to the process, prioritize & coordinate resultant projects Review and critique work of others in the department for technical correctness (QA/QC).

·        Facilitate Root Cause Analysis (RCA) of major failure/downtime events & follow up close out of corrective actions.

·        Develops maintenance personnel to perform equipment trouble shooting.

·        Compile failure data, carry out FME analysis to provide input to planning for adjustment of PM/PdM frequency and spare parts analysis.

·        Develop & manage departmental standards

·        Act as a QA/QC resource when required

·        Identify opportunity, initiate & monitor trials of alternative parts where feasible

·        Oversee new installations, including design, modification & commissioning (baseline measurement)

·        Ensures that all work is properly documented, filed and recorded for future reference

·        Assist Superintendent Resource Management to provide data interpretation & recommendations

Some of your duties will include:

·        Responsible to organize and schedule all necessary resources required to accomplish all phases of maintenance activities.

·        To organizes and schedules all necessary resources required to accomplish maintenance activities.

·        To ensures that equipment and material are available when required.

·        To ensures that necessary work history and documentation are properly organized and input into the computer history files.

• Organizes and schedules all necessary resources required to accomplish maintenance activities.
• Prepare and issue daily work schedules.
• Prepares detailed critical path plans and job cards, including equipment and materials lists for major jobs such as planned shutdowns.
• Ensures that equipment and material are available when required.
• Issues and follows up on preventative maintenance inspections and procedures.
• Ensures that necessary work history and documentation are properly organized and input into the computer history files.
• Coordinates regularly scheduled meetings with Maintenance and Operations representatives.
• Prepares weekly summary and exception reports; prepares long-term plans and schedules for review and approval.
• Prepares purchase requisitions and warehouse issue tickets.

Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

Tanggungjawab Kerja:

1. Melakukan monitoring terhadap tim marketing/business partner dalam hal kinerja dan pencapaian target

2. Melakukan market review dan menjalankan strategi untuk mencapai target yang ditetapkan

3. Bertanggung jawab atas proses bisnis dalam hal SOP, baik secara administrasi maupun di lapangan.

4. Bertanggung jawab atas portofolio cabang/point secara kualitas dan kuantitas

5. Bertanggung jawab atas soliditas tim dan mampu me-manage konflik internal tim atas dasar peraturan perusahaan.

Kualifikasi

1. Pendidikan terakhir minimum Diploma

2. Memiliki pengalaman bertanggung jawab dalam memimpin tim minimal 2tahun

3. Memiliki pengalaman minimal 2 tahun di Micro Finance atau terkait

4. Dapat menyusun strategi sales & marketing sebagai paduan tim untuk mencapai target

5. Mempunyai motor untuk digunakan bekerja

6. Dapat bergabung secepatnya

7. Bersedia ditempatkan di Alas - Sumbawa

Benefit :

1. Hari Kerja Senin s.d Jumat (Sabtu & Minggu Libur)

2. Penghasilan Tetap

3. Insentif (Berdasarakan Pencapaian)

4. Cuti (Setelah menyelesaikan kontrak Pertama)

5. Bantuan Pernikahan, Lahiran, Keguguran, Kedukaan, Bencana Alam & Logam Mulia Setiap Kelipatan Lima Tahun Masa Kerja

6. Pengangkatan Tetap & Jenjang Karir

Benefit Lainnya

1. Kesempatan Umroh (Best Perform)

2. THR & Bonus Kinerja Tahunan

3. Asuransi Kehilangan Kendaraan (S&K Berlaku)

4. Program Pinjaman Karyawan (Posisi TL Plafon Pinjaman Min 10 Juta s.d 20 Juta, S&K Berlaku)

5. Benefit Lahiran Normal 10 Juta, Benefit lahiran Caesar 20 Juta, Baby Gift 500 Ribu, Benefit Keguguran 1 Juta

6. Sumbangan Pernikahan 500Ribu & Papan Bunga Seharga 500Ribu

7. Sumbangan Kedukaan (Keluarga Inti)

Some of your duties will include:

·        Supervising, designing and calculations, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

·        Supervising, controlling and monitoring the installation and operations conform to standards and technical requirements by preparing electrical systems specifications and technical drawings.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Inspect completed work for conformance with requirements of local building and safety codes

·        Supervise with scheduling major electrical projects from ordering parts to performing the work in a timely and cost-effectengineeive manner.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Supervise with electrical and mechanical projects, installations, and shutdowns.

·        Supervise in developing and maintaining a preventative and predictive maintenance program

·        Maintain effective communication with plant operational personnel, maintenance, and supervision

·        Help with all other plant maintenance as needed

·        Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

·        Preparing specifications for purchases of electrical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Maintaining electrical equipment and following approved company procedures plan, schedule, control and completely document all work performed on the plant DCS system and distributed PLC’s including troubleshooting and configurations changes.

·        Monitor and assist in the planning of daily and future scheduled plant repairs, included assist to work of Instrumentation and control and DCS personnel to ensure the are working in a safe and efficient manner while following approved company procedures.

·        Working with a variety of technicians.

·        Must be able to work outside in all weather conditions consistent with extreme heat, cold, wetness, dryness, dust, and noisy conditions.

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

Responsible for overseeing all maintenance and repair activities within the Process Maintenance’s Central Workshop to support the smooth operation of the mineral processing plant. This role ensures the reliability, availability, and safety of mechanical equipment and tools, while also leading a team of technicians to achieve operational targets efficiently and in compliance with company policies and standards.

Workshop Operations Management:

·        Plan, organize, and supervise daily maintenance and repair tasks in the central workshop to support plant operations.

·        Ensure all work is completed on time, within budget, and to quality and safety standards.

·        Equipment Maintenance and Repair:

·        Oversee the maintenance and repair of critical plant equipment, such as crushers, conveyors, pumps, and other mechanical systems.

·        Conduct regular inspections and diagnostics to identify and address mechanical issues promptly.

Team Leadership and Development: Supervise a team of technicians, providing guidance, training, and performance evaluations; Foster a culture of safety, teamwork, and continuous improvement;

Safety and Compliance: Ensure adherence to health, safety, and environmental (HSE) regulations and company policies; Promote safe working practices within the workshop.

Resource Management:

·        Manage inventory of spare parts, tools, and consumables, ensuring availability for timely repairs.

·        Coordinate with procurement and vendors for quality and cost-effective parts supply.

Reporting and Documentation:

·        Maintain accurate records of maintenance activities, equipment history, and workshop performance metrics.

·        Generate regular reports for the Process Maintenance Manager.

Continuous Improvement:

·        Identify opportunities for improving maintenance processes and implementing best practices.

·        Collaborate with other departments to ensure the workshop’s activities align with plant operational goals.

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

Responsible for overseeing all maintenance and repair activities within the Process Maintenance’s Central Workshop to support the smooth operation of the mineral processing plant. This role ensures the reliability, availability, and safety of mechanical equipment and tools, while also leading a team of technicians to achieve operational targets efficiently and in compliance with company policies and standards.

Workshop Operations Management:

·        Plan, organize, and supervise daily maintenance and repair tasks in the central workshop to support plant operations.

·        Ensure all work is completed on time, within budget, and to quality and safety standards.

·        Equipment Maintenance and Repair:

·        Oversee the maintenance and repair of critical plant equipment, such as crushers, conveyors, pumps, and other mechanical systems.

·        Conduct regular inspections and diagnostics to identify and address mechanical issues promptly.

Team Leadership and Development: Supervise a team of technicians, providing guidance, training, and performance evaluations; Foster a culture of safety, teamwork, and continuous improvement;

Safety and Compliance: Ensure adherence to health, safety, and environmental (HSE) regulations and company policies; Promote safe working practices within the workshop.

Resource Management:

·        Manage inventory of spare parts, tools, and consumables, ensuring availability for timely repairs.

·        Coordinate with procurement and vendors for quality and cost-effective parts supply.

Reporting and Documentation:

·        Maintain accurate records of maintenance activities, equipment history, and workshop performance metrics.

·        Generate regular reports for the Process Maintenance Manager.

Continuous Improvement:

·        Identify opportunities for improving maintenance processes and implementing best practices.

·        Collaborate with other departments to ensure the workshop’s activities align with plant operational goals.

Some of your duties will include:

·        Directly supervise process maintenance electrical and instrumentation Downstream/ Upstream equipment;

·        Schedule work orders, preventive maintenance, equipment, employee vacations, employee training and employee shifts to achieve desired throughput and availability;

·        Direct and enforce departmental procedures/policies, administer discipline, enforcing company policies, enforcing applicable safety and environmental laws and regulations.

·        Conduct safety meetings, staff meetings, planned task observations and safety inspections.

·        Regularly Facilitates and /or attends Safety toolbox meeting

·        Carry out pre-shift, pre-use & general inspections at required intervals also Conduct regular on the job task observations, provide feedback.

·        STP reviewed for all tasks before commencing work

·        Competence and understanding of logical troubleshooting techniques also Participation in group problem solving initiatives (ie RCFA).

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Daily targets are derived from weekly targets which are, in turn derived from monthly targets

·        System in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Maintain clear & concise position descriptions, communicate responsibility and accountability of role

·        Carry out audits and inspections in compliance with Environmental tracker

·        Maintain all material storage areas to comply with company environmental policies

·        Effective use of new technology to solve old problems

·        Supervises the maintenance and correct use of tools and equipment such as diagnostic and calibration equipment

·        Supervises in interpreting and using blueprints, specifications, vendor data, process flow sheets, drawings and schematic diagrams

·        Supervises in installing instrument components, lay-outs of job and fabricating cable tray supports

·        Supervises in performing calibration of process instrumentation and in modifying control loops,

·        Removes/replaces instruments, adds and deletes systems. Supervises in performing maintenance and calibration of electrical and mechanical transducers

·        Supervises the installation of pneumatic instruments and lines of air bellows for balancing purposes and hydraulic lines

Some of your duties will include:

·        Responsible to support Process Operations & Maintenance in ensuring the optimal performance of mineral processing plants. This role focuses on the development, implementation, and maintenance of industrial systems and applications to enhance reliability, efficiency, and productivity across the plant.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

·        Ensure and maintain all material storage areas to comply with company policies.

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

Some of your duties will include:

·        Responsible to utilize strong engineering tools, applicable standards and scientifically references in managing mainly but not limited environmental aspect (water, emission, energy, waste); Developing and implementing strategies to ensure the mining operations and future projects comply with all applicable environmental regulations and industry best practices, optimizing environmental performance with sustainable operation; included but not limited to engage with stakeholders, manage data, review technical documents, assist in env audit and inspection, and provide robust report.

·        To develop, support, and/or review technical standard and technical studies for new project or improvement.

·        To manage, conduct and/or support in environmental engineering projects such as energy conservation, water conservation, emission reduction, waste mitigation, reuse and reutilization

·        To be accountable for water, waste, energy, and emission inventory across project site wide

·        To conduct Life Cycle Analysis (LCA) and GHG calculation using recognized scientifically and statistical tools.

·        To conduct, coordinate, and/or support water audit and energy audit,

·        To support ESG team in preparing sustainability reports and audit (SASB, OJK, IFC, ICMM, Copper Mark)

·        To engage with internal and external stakeholders during aspect impact session, construction plan review, contractor performance review, incident investigation, audit, inspection, and government inspection.

·        Advises line management regarding regulation, data trend and evaluation. 

·        Provide required resources to manage water accounting, waste inventory, energy inventory, emission inventory.

·        Develop and ensure technical standard and procedure related with water, emission, energy, and waste comply with company and International standards (ICMM, IFC, Copper Mark etc).

·        Responsible to the material preparation in 4 aspect review for management, government, and corporate officials during weekly report, management review etc.

·        Review contractor performance and proposed plan.

·        Assist student PKL.

What will you do?

• Responsible to manage Daily Gas Delivery Control including consolidation report
• Responsible to develop and manage LNG ship unloading schedule, weekly, monthly and quarterly gas delivery forecast.
• Calculate overall gas balance in LNG Terminal & Regas
• Coordinate with CCPP and Smelter on gas delivery validation and planning.
• Prepare weekly, monthly summary reports
• Work closely with Maintenance Planner for both scheduled and unscheduled activities that impact to gas delivery.
• Responsible to ensure continues improvement within Operation group
• The duties and responsibilities listed above are representative of the nature and level of work assigned and not necessarily all-inclusive.

Some of your duties will include:

·        Responsible for directing, coordinating, and supervising the work of a contracted security group including the management of all security administrative affairs at the respective sites allocated and will be responsible for the investigation of alleged or suspected offences and threats to company property, operations, and personnel.

·        Direct the activities of contracted security staff in order to protect company property and personnel.

·        Plan, coordinate and monitor the progress of security activities.

·        Conduct investigations on incidents that occur on the property, in conjunction with law enforcement officials when necessary and keep supervisors apprised of findings.

·        Supervise security officers in controlling vehicles entering and exiting the property, patrolling areas, controlling traffic on company roads, investigations, searches, monitoring security systems and responding to alarms.

·        Provide advice and guidance on security matters to company personnel and residents.

·        Review security related documents to provide advice on and interpretation of matters contained therein.

·        Carry out investigations by inspecting locations of alleged or suspected illegal activity.

·        Conduct surveillance and searches on suspected persons or activities in order to gather information and evidence.

·        Interview, research and interrogate suspects and witnesses in investigations in order to verify facts, and gather as much information as possible.

·        Prepare suspect and witness statements.

·        Prepare reports on completed and on-going investigations.

·        Prepare loss prevention and security reports for management and make recommendations for further actions or processes.

·        Participate in legal proceedings by serving legal documents, preparing evidence and presenting testimony in courts of law.

·        Collect, preserve and document all evidence and specimens relating to an investigation to be used in legal or other proceedings.

·        Conduct security presentations for Company personnel, Government representatives and contracted security agency employees.

·        Acts as coordination point in emergency situations by staying apprised of emergency response systems, monitoring emergency activities and responding as outlined in company procedure, keeping supervisors apprised of situation with regular updates.

·        Instructs security officers as to the appropriate response to incidents or unusual events.

·        Store, issue and account for company equipment issued to security personnel and supporting Law Enforcement Agencies and submit a monthly report to the Senior Supervisor Security

·        Keep abreast of and ensure compliance with Indonesian Laws and Regulations regarding security matters as well as company policy.

·        Responsible for neatness and maintenance of Security office, Guard posts and the immediate area surrounding these buildings in the respective area of responsibility.

·        Responsible to report all defects, damage, excessive overgrowth or any other issues that might influence effective security operations.

Manage the Guard tour system in respective area and submit batons to the designated monitoring station every day for downloading of information