• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Familiar with the International code and standard such as IEC, IEEE, ANSI, NEC, NEMA

• Well known electrical basic philosophy in design (Construction design)

• Familiar with Electrical design drawing software such as 2D Auto Cad, 3D model (SP3D, PDS, PDMS)

• Familiar to use general Microsoft Word & office

• Strong mind with schedule and design quality

Responsibilities:

• Ensure, record, and retain day-to-day administration and accountable operation of the safety management system at station level.
• Control the provision of services provided by third parties and to reconcile invoice prior submitted to finance department.
• Plan, manage, and control the efficient operation of passenger, baggage, ramp, and cargo handling activities at all airports in Indonesia.
• Plan, build and maintain good relations with airport stakeholders and related parties.
• Ensure airside safety, security management, and FOD policy implementation.
• Ensure station operations comply with company, airport, and government requirements.
• Ensure operational compliance with safety, security, and quality standards.
• Ensure all operational staff and contracted ground handling agents work in a safe and comfortable environment.
• Maintain professional, clean, and safe station facilities.
• Implement and maintain safety and security procedures and programs.
• Plan and develop personnel under responsibility.
• Promote a culture of fairness and open reporting of incidents and occurrences.
• Communicate any information jeopardizing safety and security through appropriate channels.

Responsibilities:

• Ensure compliance with relevant regulations, including GDPR, HIPAA, SOX, and industry-specific standards.
• Develop, implement, and monitor IT compliance policies and procedures.
• Conduct regular internal audits of IT systems, processes, and data security measures.
• Work closely with the IT and legal teams to identify and mitigate IT compliance risks.
• Coordinate with various stakeholders to integrate governance practices into IT operations.
• Monitor compliance with internal policies and external regulations.
• Strong project management skills, including planning, execution, monitoring, and completion.
• Strong analytical and problem-solving skills to identify and resolve complex issues.
• Deep understanding of networking protocols, including TCP/IP, DNS, DHCP, VPN, VLAN, etc.

PT. Binayasa Putrabatara merupakan perusahaan yang bergerak dibidang building management, jasa konstruksi dan pengadaan property membutuhkan Teknisi Maintenance Gedung

Tanggung Jawab Pekerjaan :

Melakukan kegiatan perbaikan dan pemeliharaan mekanikal elektrikal, sipil, plumbing dan AC gedung

Melaksanakan pekerjaan sesuai standart yang sudah ditetapkan

Maintenance aset fisik gedung

Keahlian :

Memahami sistem kelistrikan, mekanikal, dan plumbing yang ada di gedung.

Mampu melakukan perbaikan pada peralatan dan sistem gedung, seperti AC, pemanas, dan sistem ventilasi.

Kualifikasi :

– Kandidat harus memiliki setidaknya SMA/SMK di Teknik (Elektro), Teknik (Lainnya), Teknik (Mekanikal), Teknik Sipil atau setara.

– Setidaknya memiliki 1 tahun pengalaman dalam bidang yang sesuai untuk posisi ini.

– Lebih disukai Pegawai (non-manajemen, non-supervisor) khusus dalam Teknik – Lain-lain atau setara.

– Bersedia ditempatkan diseluruh wilayah Indonesia (Jabodetabek)

• Experience in using Revit Software is preferable
• Experience in using AutoCAD

• Experience in preparing steel structure drawing in EPC Project
• Capable to provide 3D Model using SP3D, AP3D and Tekla
• Experience in using AutoCAD

• Experience in preparing Drainage Drawing and details and/or foundation drawing in EPC Project.
• Capable to provide 3D Model using SP3D and AP3D.
• Experience in using AutoCAD.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Tugas & Tanggung Jawab

• Melakukan pengujian bahan baku, bahan kemas, dan produk jadi
• Melakukan analisa terhadap hasil pengujian
• Melakukan dokumentasi dan melaporkan hasil pengujian
• Melakukan maintain (Kalibrasi dan pembersihan alat ukur departemen RnD) termasuk lingkup 5R
• Melakukan pengembangan produk kosmetik, formula baru, existing dan product development
• Melakukan breakdown formula yang dibutuhkan untuk notifikasi BPOM RI
• Melakukan scale up formula untuk pengembangan produk baru
• Melakukan pendampingan proses produksi untuk produk baru
• Melakukan dokumentasi dan melaporkan hasil tahap scale up untuk pengembangan formula

Responsibilities:

-       Able to handle full set report in accounting (AP, AR, Bank, GL, Inventory)

-       Understand Indonesia taxes regulation (Income Tax)

-       Able to operate tax system e-spt is a plus

-       Able  to prepare cash flow and cash forecast

-       Understand Bank Indonesia reports

-       Having high anthusiasm for learning

-       Able to work in team

• Experience 5 years in EPC Project as Building Mechanical, Electrical, Plumbing (MEP) Designer/Drafter.
• Experience in using Revit Software is preferable.
• Experience in using AutoCAD.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable to understand piping standard drawing
• Capable to understand piping layout
• Capable to operate 2D CAD / 3D Model
• 3D Modeling tools experience (S3D, AP3D), SPR & Navis operation.
• Middle experience knowledge and expertise in Piping Design-layout, 3D modeling, P-Info dwg, isometric, piping plan drawing, MTO sketch

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Melakukan Penawaran produk otomotif dan jasa

Requirements :

• Candidate must have at least a Bachelor's Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• At least 1 year experience in the related field is required for this position.
•  Fresh graduate welcome to apply.
• Required skills: Native  Java, Swift, Objective C is a plus.
•  Understand with android SDK and IOS SDK.
• Experienced in integrating REST API.
• Have experienced in deploying apps in Google Play Store and Apple Appstore.
• Able to debug code.
• Experience implement design pattern + clean code is a plus.
• Able to devise/design/abstract or even architect UI/UX modular workflow.
• Motivated by learning current & new software technologies.
• Create reusable, efficient, and performable codes.
• Have a strong desire to learn and try out new ideas.

Tugas dan Tanggung Jawab:

• Mempersiapkan tender sesuai dengan tenggat waktu dan tanggung jawab yang ditetapkan
• Bekerja sama dengan tim tender terkait dalam mengumpulkan semua materi yang diperlukan dalam respons tender dan persyaratan spesifikasi
• Memantau pengumuman tender dan memahami proses dan dokumentasi tender secara menyeluruh
• Menyiapkan Jaminan Kinerja & Persyaratan Keamanan Penawaran

Kualifikasi :

• Lulusan Sarjana di bidang Administrasi Bisnis, Perdagangan, atau bidang terkait
• Memahami Platform CIVD SKK Migas, SMART GEP dan E-Procurement untuk seluruh K3S SKK Migas
• Memahami PTK 007 Rev 05
• Memiliki pengetahuan Local Content (TKDN)
• Mahir menggunakan MS Office Suite (Word, Excel, PowerPoint)
• Lancar berbahasa Inggris baik lisan maupun tulisan

Berikut Link untuk semua Lowongan Pekerjaan yang tersedia di PT. BNP Paribas Asset Management:

Karier - BNPP AM Indonesia professional investor (bnpparibas-am.com)

Tujuan Posisi:

• Bertindak sebagai Pelaksana Fungsi Investasi dan Riset;
• Untuk memberikan informasi penelitian fundamental tentang Sektor Ekuitas dan perkembangan lainnya yang relevan kepada Manajer Portofolio;
• Mewakili Tim Investasi (Ekuitas dan Pendapatan Tetap) dalam menyampaikan analisis dan prospek pasar dalam acara dan pertemuan klien, serta menulis laporan bulanan dan triwulanan untuk konsumsi klien kami, dengan cara yang ramah klien. Memberikan analisis pasar sebagai latar belakang peluncuran produk baru dan memberikan rekomendasi produk berdasarkan situasi pasar yang berlaku.

Tanggung Jawab:

1/ Pengembangan Materi Informasi Pasar:

• Mengembangkan, memelihara, dan memperbarui materi terkini pasar secara berkala, baik dalam format presentasi maupun laporan, untuk digunakan oleh tim Investasi dan penjualan dalam pertemuan/acara klien serta konsumsi klien;
• Memastikan keselarasan analisis dan prospek pasar dengan tim Investasi, baik Ekuitas maupun Pendapatan Tetap;
• Memulai dan mengembangkan pembaruan pasar penting untuk Penjualan dan klien secara tepat waktu;
• Mengembangkan, memelihara, dan memperbarui kisah pasar pendukung untuk produk lama dan baru;
• Mengembangkan tulisan tentang pasar atau produk seperti yang diminta oleh klien

2/ Dukungan Investasi Terhadap Penjualan:

• Mewakili Tim Investasi dalam pertemuan klien untuk memberikan informasi terkini tentang pasar, strategi portofolio, dan proses investasi untuk penawaran klien baru;
• Berpartisipasi dan memahami proses pengambilan keputusan strategi investasi baik untuk portofolio ekuitas maupun pendapatan tetap, dengan mengikuti pertemuan rutin tim Investasi terkait, dengan tujuan untuk dapat menyampaikan dan menjelaskan hasilnya kepada Sales dan klien;
• Menerjemahkan dan memperbarui proses dan filosofi investasi ke dalam materi yang ramah klien untuk digunakan dalam Profil Perusahaan atau materi uji tuntas;
• Mendampingi tim Penjualan jika diperlukan pada acara klien untuk memberikan informasi terkini tentang pasar, dan memastikan bahwa pandangan yang disampaikan adalah pandangan tim Investasi baik untuk Ekuitas maupun Pendapatan Tetap;
• Selalu siaga untuk memberikan pembaruan pasar penting seperti yang diminta oleh klien.

3/ Dukungan Penjualan dan Pemasaran:

• Mendukung pengembangan dokumen RFP dan menyajikan proses dan strategi investasi sebagaimana diperlukan dalam proses uji tuntas;
• Untuk memberikan rekomendasi produk yang akan mendapat manfaat dari prospek pasar tertentu, berdasarkan penelitian makro dan sektor di atas, dan menginformasikan Penjualan secara proaktif mengenai rekomendasi tersebut;
• Untuk mendukung kegiatan pemasaran dalam hal memberikan pandangan pasar dan pembaruan kepada klien berdasarkan permintaan dari Penjualan;
• Mengikuti perkembangan fitur produk, struktur, dan strategi seluruh produk yang ada di platform, serta mampu menciptakan positioning produk untuk produk tersebut.

4/ Analisis Pasar dan Perusahaan:

• Bertanggung jawab dalam pelaksanaan fungsi riset dan analisa kondisi makro ekonomi serta sektor industri; melakukan riset dan analisa tentang Efek dalam portofolio investasi yang menjadi dan/atau yang akan dijadikan sebagai portofolio investasi; dan membuat dan mendokumentasikan catatan serta laporan hasil riset. Untuk menindaklanjuti dan menganalisis perkembangan struktural dan siklus pasar ekuitas yang relevan, termasuk tren sektor dan indeks, dan untuk menganalisis faktor pendorongnya. Untuk menentukan dan mengoordinasikan output analis. Untuk mengatur dan melakukan penelitian ekuitas secara eksklusif dan untuk mempresentasikan hasil analisis ini di berbagai forum dalam Komite Investasi. Memastikan keseluruhan proses analisa telah sesuai dengan peraturan yang berlaku. Membuat dan mendokumentasikan catatan serta laporan hasil riset.

5/ Proses Pengambilan Keputusan:

• Untuk berkontribusi dalam proses pengambilan keputusan pada portofolio model ekuitas.

6/ Rekomendasi Saham dan Model Portofolio:

• Untuk memberikan rekomendasi saham, membuat laporan perusahaan terkait dengan rekomendasi saham, dan menghasilkan gagasan rekomendasi saham baru.