1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

Some of your duties will include:

·        Coordinate and oversee airport operations to ensure efficiency and compliance with regulations. This includes managing flight schedules, ground services, and coordination between different departments.

·        Direct aircraft movement using hand signals and communication devices.

·        Guide aircraft to and from parking positions, gates, and maintenance areas.

·        Ensure proper alignment of aircraft for safe docking and undocking.

·        Supervise and regulate movement traffic on the apron.

·        Coordinate with air traffic control, pilots, and ground staff to facilitate smooth aircraft movement.

·        Provide accurate instructions and updates regarding aircraft positioning and status.

·        To ensure the safety of the movement of people, equipment and aircraft on the apron.

·        To Analyze all activities on the apron during peak hours and plan aircraft parking arrangements in an emergency case.

·        To ensure that the facilities on the apron are in good condition.

·        To evaluate and coordinate operational activities on the apron and able to communicate with pilots in terms of regulating aircraft movement on the apron, especially for airside movement service personnel on duty in the tower.

·        Assist in the coordination of refueling, servicing, and loading/unloading of aircraft.

·        Support other ground operations tasks as needed, including the management of ground equipment.

Some of your duties will include:

• To supervise the technical aspects of operation and to give engineering level support to maintenance and operations with respect to the various Steam Systems across the smelter and at the Powerhouse area in particular, plus various Utilities Systems across the site. This will be done through in-depth analysis of machine performance, processes and output to influence condition monitoring and predictive maintenance as well as technical training to increase productivity and plant availability.

• To supervise flawless operation of the Plant Information (PI) System for plant-wide monitoring and analysis of digitized data pertaining to all process plants and associated utilities. 

• To supervise implementation of Standard Operating Procedures, and relevant statutory, safety, health and environment norms. 

• To monitor performance and enable continuous training of the technical team supporting Steam System and Utilities operation.

• To undertake the gold & silver reduction, gold and silver electro refinery, process at the Precious Metal Refinery (PMR) at Amman Mineral Industri towards the production of gold bars of stipulated purity range along with other quality specifications after subsequent processes.

• To achieve norms of productivity and learn continuously towards improvement of technical competencies and multiskilling.

• Mengatur dan mengarahkan pelaksanaan kegiatan perawatan lapangan golf
• Mengevaluasi laporan hasil pekerjaan perawatan lapangan sport center dan birdie cafe baik rutin maupun yang ditargetkan dari seluruh kegiatan perawatan sport center
• Mengatur kegiatan perawatan mekanik dan elektrik (instalasi listrik dll)
• Mengatur penyusunan jadwal perawatan lapangan golf
• Mengarahkan pemantauan kinerja karyawan diperawatan golf

Pengemudi barang atau supir pengiriman bertugas mengangkut barang dari satu tempat ke tempat lain sesuai dengan jadwal dan rute yang telah ditentukan. Berikut beberapa tugas dan tanggung jawab,

• Mengangkut dan menurunkan barang dengan aman 
• Memastikan barang sampai ke tujuan tepat waktu 
• Berkendara sesuai dengan peraturan lalu lintas 
• Menjaga kondisi kendaraan dan memperbaikinya jika terjadi kendala 
• Memiliki SIM A/B1
• Mengetahui rute dan peta 
• Memastikan barang dikirim dalam kondisi baik 
• Melakukan check awal sebelum kendaraan dioperasikan 
• Melakukan check terhadap barang yang akan dimuat dan dikirim 
• Menjaga kebersihan kendaraan

• Supervise and provide feedback to the customer service team, ensuring smooth daily operations.
• Provide support to customer service staff when needed, assisting with complex tasks and resolving issues.
• Investigate and resolve customer complaints, ensuring consistently high levels of customer satisfaction.
• Effectively manage ticketing flow and coverage to ensure efficient handling of customer inquiries.
• Train team members on customer service best practices and company policies maintain high-quality service standards.
• Oversee the development and implementation of service policies, keeping both staff and customers informed.
• Maintain accurate documentation of customer service activities and compile performance reports.
• Collaborate with the Support team to ensure excellent service delivery and seamless coordination between teams.

PT. Binayasa Putrabatara merupakan perusahaan yang bergerak dibidang building management, jasa konstruksi dan pengadaan property membutuhkan Teknisi Maintenance Gedung

Tanggung Jawab Pekerjaan :

Melakukan kegiatan perbaikan dan pemeliharaan mekanikal elektrikal, sipil, plumbing dan AC gedung

Melaksanakan pekerjaan sesuai standart yang sudah ditetapkan

Maintenance aset fisik gedung

Keahlian :

Memahami sistem kelistrikan, mekanikal, dan plumbing yang ada di gedung.

Mampu melakukan perbaikan pada peralatan dan sistem gedung, seperti AC, pemanas, dan sistem ventilasi.

Kualifikasi :

– Kandidat harus memiliki setidaknya SMA/SMK di Teknik (Elektro), Teknik (Lainnya), Teknik (Mekanikal), Teknik Sipil atau setara.

– Setidaknya memiliki 1 tahun pengalaman dalam bidang yang sesuai untuk posisi ini.

– Lebih disukai Pegawai (non-manajemen, non-supervisor) khusus dalam Teknik – Lain-lain atau setara.

– Bersedia ditempatkan diseluruh wilayah Indonesia (Jabodetabek)

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Responsibility:

• Bertanggung jawab terhadap penyelesaian masalah/ketidaksesuaian/kerusakan di bagian pemeliharaan mesin dan infrastruktur
• Bertanggung jawab terhadap penerapan kebijakan, peraturan & sistem yang ditetapkan perusahaan di bagian pemeliharaan mesin dan infrastruktur
• Mengevaluasi & melaporkan hasil kerja bagian pemeliharaan
• Bertanggung jawab terhadap pencapaian sasaran mutu yang ditetapkan di bagian pemeliharaan infrastruktur

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Batam

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Medan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Unit Cabang Balikpapan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

Rentokil Initial adalah perusahaan jasa multinasional yang telah tersebar di 70 negara dengan jumlah karyawan sebanyak 35.000. Kami berusaha untuk melindungi Anda dan meningkatkan kehidupan, misalnya dengan mengendalikan hama, meningkatkan kebersihan. Kami ahli dalam bidang beroperasi dan berinvestasi dalam pelatihan, sains, inovasi, serta teknologi. Mendengarkan dan bertindak atas informasi yang disampaikan adalah bagian dari budaya kita untuk mendukung kolega dan pelanggan kami. Rentokil Initial menganggap kesetaraan dan keadilan sebagai hak fundamental dari semua rekannya. Kami menjalankan nilai-nilai layanan, Hubungan, dan Kerja Tim yang diidentifikasi oleh kolega kami di seluruh dunia.

Rentokil Pest Control adalah perusahaan pengendalian hama komersial terkemuka di dunia, yang beroperasi di 70 negara dan berada di peringkat 3 teratas di 65 negara tersebut. Berada di peringkat 3 teratas di 38 dari 44 negara tempat kami beroperasi, Initial Hygiene adalah pemimpin pasar yang menyediakan layanan berkualitas, rajin, dan ramah kepada semua pelanggan. Rentokil Initial adalah pemimpin dan pelopor industri, memberikan solusi inovatif yang membantu pelanggan untuk mengurangi risiko dan mendorong pertumbuhan bisnis. Kami juga memiliki bisnis spesialis seperti Spesialis Kebersihan dan Perawatan Properti, yang memimpin bidangnya masing-masing. Di semua operasi kami secara global, kami memiliki reputasi positif di antara pelanggan kami untuk pengetahuan dan integritas kami. memiliki fungsi dukungan terpusat dari Sumber Daya Manusia, TI, Keuangan, Hukum dan Pemasaran & Inovasi di lokasi Kantor Pusat Rentokil Initial dan di Negara.

Tugas dan Tanggung Jawab :

• Melakukan pengawasan pengendalian sesuai dengan standard operating procedure (SOP) perusahaan dan instruksi kerja(WI) yang digariskan perusahaan atau atas intruksi atasan untuk kepentingan perusahaan
• Melakukan komunikasi dengan baik ke pelanggan.
• Menangani keluhan pelanggan dengan baik, bersama-sama dengan service coordinator, supervisor, service manager, atau dengan branch manager.
• Merespon keluhan pelanggan maksimal 2 jam, sejak keluhan masuk dan melakukan tindakan langkah perbaikan maksimal 24 jam dari janji yang disepakati.

• Perempuan
• Lulusan SMA/K/sederajat (D3 dan S1 diperbolehkan untuk melamar)
• Memiliki loyalitas yang tinggi dan mampu berkomunikasi dengan baik
• Memiliki SIM A/SIM C
• Memiliki jiwa melayani
• Mampu berkomunikasi dengan baik
• Berpenampilan rapi dan bersih

• Gaji Pokok
• Tunjangan
• Insentif
• Bonus

Pembuatan dan Kontrol Dokumen