A.  Qualifications:

• Minimum education: SMK (Vocational High School) in Electrical Engineering, D3 Electrical, or S1 Electrical Engineering
• Strong and adequate physical condition
• Maximum age of 30
• Expertise in low and high voltage electrical systems and electronic equipment
• Proficient in handling generators, main panels, electrical network installations, also create or develop electrical systems also blueprints.
• create, calculating and develop electrical schematics (wiring diagram, SLD, Electrical Block Diagram), as well as maintenance and repairs
• Able to work both in a team and individually
• Able to work under pressure
• Willing to handle tasks outside of electrical work that are part of the FEM (Facility, Equipment & Maintenance) division
• Willing to work in shifts and available for on-call duty outside of normal working hours
• Interview will be conducted online
• Male applicants only
• Must be domiciled in the Subang area, West Java (Prioritize for Pusakanagara, Sukra, Pamanukan, Compreng, Bojong, Ciasem and surrounding)

Preferred Qualifications:

• Strong understanding of electrical theory and practice
• Knowledgeable in electrical distribution panel assembly
• Proficient in using AutoCAD software
• Minimum of 3 years of experience
• Possession of a professional engineer certification or relevant professional qualification certificate is highly preferred (LSP/BNSP or equivalent)
• Basic understanding of pump control systems and plumbing
• Familiarity with IP CCTV systems, door access, and other automation systems
• Holder of a valid SIM A (driver's license)

B.  Job Description:

Responsibilities include:

• Developing and adhering to technical specifications and electrical engineering standards
• Integrating electrical systems with other systems, such as machinery or software, to ensure seamless operation
• Diagnosing electrical system faults, proposing solutions, and performing repairs
• Ensuring on-site electrical engineering practices comply with safety regulations and industry standards
• Repairing electrical panel boxes and cable connections
• Conducting regular inspections and general electrical maintenance

• Responsible for assisting the Chief Engineer in the overall day to day operations.
• Conform and adhere to the policies & procedures and rules & regulations laid down by hotel in order to achieve the highest levels of uniformity and guest service.
• To supervise the upkeep and maintenance of all the equipment of the company.
• Any matter which may effect the interests of hotel should be brought to the attention of the Management.
• Establish and maintain seamless co-ordination & co-operation with all departments to ensure maximum cooperation, productivity, morale and guest service.
• Provide effective support to the team to enable them to deliver effective and efficient services.
• Respond to customer queries by resolving issues in a timely and efficient manner to ensure customer satisfaction.
• Motivate and develop staff to ensure smooth functioning of the department.
• Ensure that the team is trained for all safety provisions.

1. Work with certain parties in Manufacturing and Regional Site to develop new product in accordance with regulation Global Regulation and International Toys Safety Regulation Standards.
2. Create quality testing standard method
3. Ensure and maintain company high level reliability on toy development to meet corporate requirement
4. Prepare certification package prior to product release to production
5. Responsible to cover some QC function to support smooth production operation.

Qualification :

• Minimum education Diploma, Bachelor's degree equivalent in Industrial Engineering
• Have minimal experience. 1 year as QA in manufacturing
• Intermediate in Japanese (min. JLPT N3)
• Mastering computer operation (MS. Office)
• Have good communication, conscientious, and hard worker
• Have good analytical thinking
• Able to work in a team, communicative, and able to work under pressure
• Willing to be placed in MM2100 area, Cibitung

Duties and responsibilities :

• Able to analyze of internal quality product and customer claim.
• Verification and evaluation of production operator performance.
• Understand of measurement methods and be able to operate measuring instruments.
• Create, review, and manage quality guidance within quality process workflows.
• Drive continuous improvement through analysis, development, enhancement, innovation, and inspection of processes and work outcomes.

Design of offshore oil and gas production facilities by developing mechanical design concepts and drawings, performing mechanical calculations, reviewing and implementing mechanical design criteria, specifications, government regulations and industry codes.

Mastering building maintenance & structur, PLC and operate CNC Machine

Have knowledge AutoCad and Ms. Office

Able to speak in English

1. Melakukan inspeksi terhadap produk berdasarkan rencana inspeksi
2. Melakukan pencatatan terhadap hasil inspeksi

• Server Performance Monitoring: Proactively monitor server performance within a 24/7 environment to ensure systems are operating smoothly.
• Issue Resolution: Address and resolve server-related issues within specified timeframes in accordance with Service Level Agreements (SLAs).
• Troubleshooting: Identify and resolve server issues, including those related to the operating system and server applications.
• Documentation and Reporting: Prepare routine reports on server performance and status using Office applications (Excel, Word).

• Develop and provide tool / transferred toll/ back up tools to support from new toy development stage through running in production stage
• Ensure tools are running as quoted in the tool plan
• Review tool and part design for any modification
• Conduct mold trial, verify and release approval document to production.

1. Develop method and process for painted new toy production.
2. Lead for piloting new toy and ensure the process is proper based on methods, tools, layout and process buyoff.
3. Contribute on design tooling and machinery for painted part accessories of new toys to achieve
4. Improve automation technology within process engineering with focusing on safety, quality, reliability and productivity.

• Design and implement customized CCTV systems based on client requirements.
• Install, configure, and maintain CCTV cameras and related equipment.
• Conduct site surveys, assessments to determine optimal camera placement.
• Support and involve in proof of concept or demo during tender presales stage and project implementation stage, if required.
• Integrate CCTV systems with other security systems, such as access control and alarm system and Building Management System.
• Provide technical support and troubleshooting for clients' CCTV systems.
• Perform regular check partner and discuss about system maintenance and upgrades to ensure optimal performance.
• Document system designs, configurations, and maintenance records.
• Train clients/ partners on the operation and maintenance of their CCTV systems.
• Stay up-to-date with the latest advancements in CCTV technology.
• Collaborate with Partner engineers and technicians on projects as needed.
• Ensure compliance with industry standards and regulations.
• Provide excellent customer service and maintain positive client relationships.
• Responsible for the detailed system design, solution completeness and support in implementation of medium to large scale IT/ Engineering projects with high complexity and within budget to comply to specifications and meet customer’s requirements.
• Support and involve in proof of concept or demo during tender presales stage and project implementation stage, if required.

1. Melakukan survey lokasi pemasangan sistem PLTS dan memberikan laporannya kepada atasan, manajemen dan pihak distributor.
2. Menganalisa dan mendesain konstruksi system PLTS dari project potensial dan yang sedang berjalan.
3. Menyusun Bill of Quantity (BOQ) sistem PLTS.
4. Melaksanakan simulasi sistem PLTS menggunakan PVSyst dan memastikan tidak terdapat error dan hambatan lain dalam desain.
5. Membuat desain 3D dan DED detailed engineering designs (sesuai permintaan developer) pada perancangan sistem PLTS menggunakan aplikasi i.e. Sketch up dan Autocad.
6. Memastikan Instalasi PLTS sesuai rancangan yang telah di mendapat Approval dari Developer.
7. Turut terlibat dalam tahap commissioning, menyiapkan dokumen hand-over sesuai standar yang telah ditetapkan oleh developer; Melaksanakan Operation and Maintenance (O&M) sistem PLTS di proyek tersebut secara reguler paska commissioning.
8. Mengecek item dan jumlah peralatan yang akan di instalasi dan paska instalasi untuk memastikan kodisi nya layal pakai dan tepat jumlah nya.
9. Menjalankan tugas lain yang diberikan oleh atasan langsung yang berkitan dengan jabatan ini.

• Mengevaluasi efektivitas teknologi, perangkat lunak, atau peralatan dan mesin yang digunakan saat ini untuk meningkatkan produktivitas dan kualitas teknologi terkait.
• Menganalisis prosedur dan praktik yang diterapkan saat ini untuk mengidentifikasi area yang memerlukan perbaikan.
• Berkoordinasi dengan tim teknis untuk membuat atau update sistem, perangkat lunak, atau peralatan lainnya.
• Menetapkan jadwal dan deadline tim untuk setiap project agar dapat mencapai target.

1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

• S1 Industrial Engineering, S1 Industrial Management preferred
• HSE experience, quality control management, Be able to provide problem solving external claims
• Be able to analyze data on the causes of increase and decrease in production results
• Audit Compliance, ISO audit experience preferred
• Communicative, dynamic and challenging
• Max 35 Year

• Able to analyze of internal quality product and customer claim.
• Verification and evaluation of production operator performance.
• Understand of measurement methods and be able to operate measuring instruments.
• Create, review, and manage quality guidance within quality process workflows.
• Drive continuous improvement through analysis, development, enhancement, innovation, and inspection of processes and work outcomes.

• Minimum education Diploma, Bachelor's degree equivalent in Industrial Engineering
• Have minimal experience. 1 year as QA in manufacturing
• Intermediate in Japanese (min. JLPT N3)
• Mastering computer operation (MS. Office)
• Have good communication, conscientious, and hard worker
• Have good analytical thinking
• Able to work in a team, communicative, and able to work under pressure
• Willing to be placed in MM2100 area, Cibitung

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)