1. Melakukan survey lokasi pemasangan sistem PLTS dan memberikan laporannya kepada atasan, manajemen dan pihak distributor.
2. Menganalisa dan mendesain konstruksi system PLTS dari project potensial dan yang sedang berjalan.
3. Menyusun Bill of Quantity (BOQ) sistem PLTS.
4. Melaksanakan simulasi sistem PLTS menggunakan PVSyst dan memastikan tidak terdapat error dan hambatan lain dalam desain.
5. Membuat desain 3D dan DED detailed engineering designs (sesuai permintaan developer) pada perancangan sistem PLTS menggunakan aplikasi i.e. Sketch up dan Autocad.
6. Memastikan Instalasi PLTS sesuai rancangan yang telah di mendapat Approval dari Developer.
7. Turut terlibat dalam tahap commissioning, menyiapkan dokumen hand-over sesuai standar yang telah ditetapkan oleh developer; Melaksanakan Operation and Maintenance (O&M) sistem PLTS di proyek tersebut secara reguler paska commissioning.
8. Mengecek item dan jumlah peralatan yang akan di instalasi dan paska instalasi untuk memastikan kodisi nya layal pakai dan tepat jumlah nya.
9. Menjalankan tugas lain yang diberikan oleh atasan langsung yang berkitan dengan jabatan ini.

• S1 Industrial Engineering, S1 Industrial Management preferred
• HSE experience, quality control management, Be able to provide problem solving external claims
• Be able to analyze data on the causes of increase and decrease in production results
• Audit Compliance, ISO audit experience preferred
• Communicative, dynamic and challenging
• Max 35 Year

• Mengevaluasi efektivitas teknologi, perangkat lunak, atau peralatan dan mesin yang digunakan saat ini untuk meningkatkan produktivitas dan kualitas teknologi terkait.
• Menganalisis prosedur dan praktik yang diterapkan saat ini untuk mengidentifikasi area yang memerlukan perbaikan.
• Berkoordinasi dengan tim teknis untuk membuat atau update sistem, perangkat lunak, atau peralatan lainnya.
• Menetapkan jadwal dan deadline tim untuk setiap project agar dapat mencapai target.

1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

Some of your duties will include:

• To supervise the technical aspects of operation and to give engineering level support to maintenance and operations with respect to the various Steam Systems across the smelter and at the Powerhouse area in particular, plus various Utilities Systems across the site. This will be done through in-depth analysis of machine performance, processes and output to influence condition monitoring and predictive maintenance as well as technical training to increase productivity and plant availability.

• To supervise flawless operation of the Plant Information (PI) System for plant-wide monitoring and analysis of digitized data pertaining to all process plants and associated utilities. 

• To supervise implementation of Standard Operating Procedures, and relevant statutory, safety, health and environment norms. 

• To monitor performance and enable continuous training of the technical team supporting Steam System and Utilities operation.

• To undertake the gold & silver reduction, gold and silver electro refinery, process at the Precious Metal Refinery (PMR) at Amman Mineral Industri towards the production of gold bars of stipulated purity range along with other quality specifications after subsequent processes.

• To achieve norms of productivity and learn continuously towards improvement of technical competencies and multiskilling.

Kualifiksii Kebutuhan Staff Document Control-QC:

- Laki-laki, usia maksimal 35 tahun

- Pendidikan minimal SLTA sederajat

- Bersedia bekerja full time senin-kamis pukul 07:20 s/d 16:30 dan jum'at 07:20 s/d 17:00, sabtu minggu hari libur

- Memiliki pengalaman min 1 tahun di bidang yang sama

- Mengerti prosedur audit internal dan external ISO 9001, ISO 14001, IATF 16949 dan Sertifikasi perusahaan lainnya.

- Sudah memiliki sertifikasi ISO 9001, ISO 14001, IATF 16949 dan ISO lainnya.

- Mahir dalam Document Management System dan Software seperti Microsoft Word, Excel, PowerPoint

- Memiliki kemampuan analisa yang baik, detail, teliti dan terbiasa bekerja secara individu maupun team

- Bersedia ditempatkan di Kawasan GIIC Blok AA Kota Deltamas-Cikarang Pusat

• Able to analyze of internal quality product and customer claim.
• Verification and evaluation of production operator performance.
• Understand of measurement methods and be able to operate measuring instruments.
• Create, review, and manage quality guidance within quality process workflows.
• Drive continuous improvement through analysis, development, enhancement, innovation, and inspection of processes and work outcomes.

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

Some of your duties will include:

·        Create new catalogue items as requested by user Department through series of assessment to determine stock classification, mnemonic, etc.

·        Change material master information based on review result with user area

·        Cleansing potential duplication of material master

·        Standardize material description and manufacture part number

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• pengumpulan sampel beton
• pengujian kekuatan tekan
• analisis komposisi material beton.

1 . Memastikan bahan baku, seperti kelapa, air, dan komponen lain yang digunakan, sesuai dengan standar kualitas yang ditentukan

2 . Melakukan pengujian fisik dan kimia terhadap bahan baku (misalnya pH, kebersihan, turbidity, dll.)

3 . Mengawasi setiap tahap proses pengolahan santan dan air kelapa untuk memastikan konsistensi kualitas

4 . Memastikan suhu, tekanan, waktu proses, dan parameter lainnya sesuai dengan standar

5 . Melakukan sampling secara berkala untuk diuji di laboratorium

6 . Mencatat hasil monitoring dan pengujian dalam laporan yang sistematis

7 . Memastikan seluruh fasilitas produksi, alat, dan mesin selalu bersih dan higienis sesuai standar sanitasi industri makanan

8 . Melakukan inspeksi kebersihan secara berkala pada ruang produksi dan peralatan

9 . Mengidentifikasi produk yang tidak memenuhi standar kualitas dan memastikan tindakan korektif segera diambil (misalnya menghentikan produksi sementara, mengulang proses, atau menghentikan distribusi produk yang tidak layak)

10 . Memastikan alat-alat pengujian di laboratorium selalu dikalibrasi dan berfungsi dengan baik untuk menghindari kesalahan pengujian

11 . Memastikan proses produksi dan produk akhir aman untuk dikonsumsi

12 . Melakukan sampling produk secara berkala selama proses produksi untuk diuji kualitasnya

13 . Mengimplementasikan dan mematuhi sistem manajemen mutu seperti BRC, ISO, HACCP, atau GMP

14 . Memastikan standar mutu diterapkan dalam setiap aspek produksi dan distribusi

• Melakukan pengecekan check sheet dari bagian produksi
• Melakukan repair barang

Responsibilities :

1. Recommend adjustments to assembly or production processes.
2. Ensure that products are checked according to standards and report to the direct superior if any product discrepancies are found.
3. Inspect, test, or measure manufactured materials or products. Accept or reject finished goods.
4. Inspect product samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and checking functionality.
5. Check incoming and outgoing goods. Day-to-day inspection of incoming, processed, and outgoing products.
6. Remove all products and materials that fail to meet specifications. Determine the cause of product defects and rework.
7. Check that assembly or production lines comply with standard procedures. Comply with legal requirements.
8. Review blueprints and specifications to compare to manufactured items.
9. Record inspection results by completing reports, summarizing rework and waste, and entering data into a quality database.
10. Report inspection results (incoming, Process, and Outgoing) via WA and Checksheet on the same day.
11. Monitor the safety of equipment use and discard any that do not meet requirements.
12. Assists in the development of test methods and inspection plans.
13. Keeps measurement equipment operating accurately by following calibration requirements and calling for repairs
14. Participate in creating IK and OPL for critical products and critical processes.

Kualifikasi :

-Pria/Wanita

-Usia Maksimal 30 Tahun

-Memiliki Pengalaman 2 Tahun Sebagai Internal Auditor Training/Relevan

-Mengerti ISO

-Diutamakan Memiliki Sertifikat ISO Terakreditasi Dari Lembaga Pelatihan

-Dapat Bergabung Secepatnya