1. Melakukan Monitoring, maintenance, dan Evaluasi terhadap infrastruktur Call Center Polri dalam kondisi terbaik dan berfungsi secara optimal mengacu kepada standart dan kualitas untuk menghasilkan pelayanan sesuai dengan standar yang ditetapkan.

2. Menjamin seluruh teknologi yang terkait dengan pelayanan berfungsi secara optimal mengacu kepada standart dan kualitas yang ditetapkan.

3. Menjaga aktifitas infrastruktur CC Polri berjalan dengan baik 

4. melakukan monitoring, koordinasi, dan evaluasi pengendalian evaluasi pengendalian teknis terhadap infrastruktur CC

5. Memastikan infrastruktur CC dalam kondisi terbaik untuk menghasilkan pelayanan sesuai standar

6. Melaksanakan program maintenance terhadap infrastruktur CC sesuai dengan jadwal yang telah di tetapkan

7. Melakukan backup dan restore data

1. Melakukan Monitoring, maintenance, dan Evaluasi terhadap infrastruktur Call Center Polri dalam kondisi terbaik dan berfungsi secara optimal mengacu kepada standart dan kualitas untuk menghasilkan pelayanan sesuai dengan standar yang ditetapkan.

2. Menjamin seluruh teknologi yang terkait dengan pelayanan berfungsi secara optimal mengacu kepada standart dan kualitas yang ditetapkan.

3. Menjaga aktifitas infrastruktur CC Polri berjalan dengan baik 

4. melakukan monitoring, koordinasi, dan evaluasi pengendalian evaluasi pengendalian teknis terhadap infrastruktur CC

5. Memastikan infrastruktur CC dalam kondisi terbaik untuk menghasilkan pelayanan sesuai standar

6. Melaksanakan program maintenance terhadap infrastruktur CC sesuai dengan jadwal yang telah di tetapkan

7. Melakukan backup dan restore datapol

A.  Qualifications:

• Minimum education: SMK (Vocational High School) in Electrical Engineering, D3 Electrical, or S1 Electrical Engineering
• Strong and adequate physical condition
• Maximum age of 30
• Expertise in low and high voltage electrical systems and electronic equipment
• Proficient in handling generators, main panels, electrical network installations, also create or develop electrical systems also blueprints.
• create, calculating and develop electrical schematics (wiring diagram, SLD, Electrical Block Diagram), as well as maintenance and repairs
• Able to work both in a team and individually
• Able to work under pressure
• Willing to handle tasks outside of electrical work that are part of the FEM (Facility, Equipment & Maintenance) division
• Willing to work in shifts and available for on-call duty outside of normal working hours
• Interview will be conducted online
• Male applicants only
• Must be domiciled in the Subang area, West Java (Prioritize for Pusakanagara, Sukra, Pamanukan, Compreng, Bojong, Ciasem and surrounding)

Preferred Qualifications:

• Strong understanding of electrical theory and practice
• Knowledgeable in electrical distribution panel assembly
• Proficient in using AutoCAD software
• Minimum of 3 years of experience
• Possession of a professional engineer certification or relevant professional qualification certificate is highly preferred (LSP/BNSP or equivalent)
• Basic understanding of pump control systems and plumbing
• Familiarity with IP CCTV systems, door access, and other automation systems
• Holder of a valid SIM A (driver's license)

B.  Job Description:

Responsibilities include:

• Developing and adhering to technical specifications and electrical engineering standards
• Integrating electrical systems with other systems, such as machinery or software, to ensure seamless operation
• Diagnosing electrical system faults, proposing solutions, and performing repairs
• Ensuring on-site electrical engineering practices comply with safety regulations and industry standards
• Repairing electrical panel boxes and cable connections
• Conducting regular inspections and general electrical maintenance

• Check and review structural document
• Calculate structural project
• Site checking with Deputy Manager
• Check shop drawings
• Produce minutes of meetings

• Check and review shop drawings
• Calculate MEP requirement
• Site check and coordination
• Produce minutes of meetings

• To support with the establishment of the overall success criteria for the project, including time, cost, technical and performance parameters
• To identify and ensure that the appropriate line manager is aware of quality, safety, health and environment issues
• To maintain effective project governance, processes and systems to be utilized throughout project
• Project planning, including producing the detailed project plan
• To lead and facilitate the overall cross-functional project team
• To manage the change control process
• To monitor and advise upon project finances
• To manage the flow of project information between the team and the client, through regular meetings and written communications
• To prepare formal project progress and other reports
• To take a leading role in interfacing with the client and other consultants, at all project stages

Mengawasi dan mengontrol administrasi dan kontrol dokumen, Translate bahasa Mandarin ke bahasa Inggris dan bahasa Indonesia atau sebaliknya.

1. Work with certain parties in Manufacturing and Regional Site to develop new product in accordance with regulation Global Regulation and International Toys Safety Regulation Standards.
2. Create quality testing standard method
3. Ensure and maintain company high level reliability on toy development to meet corporate requirement
4. Prepare certification package prior to product release to production
5. Responsible to cover some QC function to support smooth production operation.

Qualification :

• Minimum education Diploma, Bachelor's degree equivalent in Industrial Engineering
• Have minimal experience. 1 year as QA in manufacturing
• Intermediate in Japanese (min. JLPT N3)
• Mastering computer operation (MS. Office)
• Have good communication, conscientious, and hard worker
• Have good analytical thinking
• Able to work in a team, communicative, and able to work under pressure
• Willing to be placed in MM2100 area, Cibitung

Duties and responsibilities :

• Able to analyze of internal quality product and customer claim.
• Verification and evaluation of production operator performance.
• Understand of measurement methods and be able to operate measuring instruments.
• Create, review, and manage quality guidance within quality process workflows.
• Drive continuous improvement through analysis, development, enhancement, innovation, and inspection of processes and work outcomes.

1. Melakukan inspeksi terhadap produk berdasarkan rencana inspeksi
2. Melakukan pencatatan terhadap hasil inspeksi

• Server Performance Monitoring: Proactively monitor server performance within a 24/7 environment to ensure systems are operating smoothly.
• Issue Resolution: Address and resolve server-related issues within specified timeframes in accordance with Service Level Agreements (SLAs).
• Troubleshooting: Identify and resolve server issues, including those related to the operating system and server applications.
• Documentation and Reporting: Prepare routine reports on server performance and status using Office applications (Excel, Word).

• Develop and provide tool / transferred toll/ back up tools to support from new toy development stage through running in production stage
• Ensure tools are running as quoted in the tool plan
• Review tool and part design for any modification
• Conduct mold trial, verify and release approval document to production.

1. Develop method and process for painted new toy production.
2. Lead for piloting new toy and ensure the process is proper based on methods, tools, layout and process buyoff.
3. Contribute on design tooling and machinery for painted part accessories of new toys to achieve
4. Improve automation technology within process engineering with focusing on safety, quality, reliability and productivity.

• S1 Industrial Engineering, S1 Industrial Management preferred
• HSE experience, quality control management, Be able to provide problem solving external claims
• Be able to analyze data on the causes of increase and decrease in production results
• Audit Compliance, ISO audit experience preferred
• Communicative, dynamic and challenging
• Max 35 Year

1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

Kualifiksii Kebutuhan Staff Document Control-QC:

- Laki-laki, usia maksimal 35 tahun

- Pendidikan minimal SLTA sederajat

- Bersedia bekerja full time senin-kamis pukul 07:20 s/d 16:30 dan jum'at 07:20 s/d 17:00, sabtu minggu hari libur

- Memiliki pengalaman min 1 tahun di bidang yang sama

- Mengerti prosedur audit internal dan external ISO 9001, ISO 14001, IATF 16949 dan Sertifikasi perusahaan lainnya.

- Sudah memiliki sertifikasi ISO 9001, ISO 14001, IATF 16949 dan ISO lainnya.

- Mahir dalam Document Management System dan Software seperti Microsoft Word, Excel, PowerPoint

- Memiliki kemampuan analisa yang baik, detail, teliti dan terbiasa bekerja secara individu maupun team

- Bersedia ditempatkan di Kawasan GIIC Blok AA Kota Deltamas-Cikarang Pusat

• Able to analyze of internal quality product and customer claim.
• Verification and evaluation of production operator performance.
• Understand of measurement methods and be able to operate measuring instruments.
• Create, review, and manage quality guidance within quality process workflows.
• Drive continuous improvement through analysis, development, enhancement, innovation, and inspection of processes and work outcomes.

• Minimum education Diploma, Bachelor's degree equivalent in Industrial Engineering
• Have minimal experience. 1 year as QA in manufacturing
• Intermediate in Japanese (min. JLPT N3)
• Mastering computer operation (MS. Office)
• Have good communication, conscientious, and hard worker
• Have good analytical thinking
• Able to work in a team, communicative, and able to work under pressure
• Willing to be placed in MM2100 area, Cibitung

• pengumpulan sampel beton
• pengujian kekuatan tekan
• analisis komposisi material beton.

1 . Memastikan bahan baku, seperti kelapa, air, dan komponen lain yang digunakan, sesuai dengan standar kualitas yang ditentukan

2 . Melakukan pengujian fisik dan kimia terhadap bahan baku (misalnya pH, kebersihan, turbidity, dll.)

3 . Mengawasi setiap tahap proses pengolahan santan dan air kelapa untuk memastikan konsistensi kualitas

4 . Memastikan suhu, tekanan, waktu proses, dan parameter lainnya sesuai dengan standar

5 . Melakukan sampling secara berkala untuk diuji di laboratorium

6 . Mencatat hasil monitoring dan pengujian dalam laporan yang sistematis

7 . Memastikan seluruh fasilitas produksi, alat, dan mesin selalu bersih dan higienis sesuai standar sanitasi industri makanan

8 . Melakukan inspeksi kebersihan secara berkala pada ruang produksi dan peralatan

9 . Mengidentifikasi produk yang tidak memenuhi standar kualitas dan memastikan tindakan korektif segera diambil (misalnya menghentikan produksi sementara, mengulang proses, atau menghentikan distribusi produk yang tidak layak)

10 . Memastikan alat-alat pengujian di laboratorium selalu dikalibrasi dan berfungsi dengan baik untuk menghindari kesalahan pengujian

11 . Memastikan proses produksi dan produk akhir aman untuk dikonsumsi

12 . Melakukan sampling produk secara berkala selama proses produksi untuk diuji kualitasnya

13 . Mengimplementasikan dan mematuhi sistem manajemen mutu seperti BRC, ISO, HACCP, atau GMP

14 . Memastikan standar mutu diterapkan dalam setiap aspek produksi dan distribusi

• Melakukan pengecekan check sheet dari bagian produksi
• Melakukan repair barang

Responsibilities :

1. Recommend adjustments to assembly or production processes.
2. Ensure that products are checked according to standards and report to the direct superior if any product discrepancies are found.
3. Inspect, test, or measure manufactured materials or products. Accept or reject finished goods.
4. Inspect product samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and checking functionality.
5. Check incoming and outgoing goods. Day-to-day inspection of incoming, processed, and outgoing products.
6. Remove all products and materials that fail to meet specifications. Determine the cause of product defects and rework.
7. Check that assembly or production lines comply with standard procedures. Comply with legal requirements.
8. Review blueprints and specifications to compare to manufactured items.
9. Record inspection results by completing reports, summarizing rework and waste, and entering data into a quality database.
10. Report inspection results (incoming, Process, and Outgoing) via WA and Checksheet on the same day.
11. Monitor the safety of equipment use and discard any that do not meet requirements.
12. Assists in the development of test methods and inspection plans.
13. Keeps measurement equipment operating accurately by following calibration requirements and calling for repairs
14. Participate in creating IK and OPL for critical products and critical processes.

Kualifikasi :

-Pria/Wanita

-Usia Maksimal 30 Tahun

-Memiliki Pengalaman 2 Tahun Sebagai Internal Auditor Training/Relevan

-Mengerti ISO

-Diutamakan Memiliki Sertifikat ISO Terakreditasi Dari Lembaga Pelatihan

-Dapat Bergabung Secepatnya

Quality Staff (Quality Assurance/Quality Control) 

Mendukung Head of Quality dalam melakukan pengawasan dan tanggung jawab untuk memonitor Quality Department Performance: Penyusunan produk defect termasuk laporan tindakan perbaikan/pencegahan kepada Pelanggan, penyempurnaan rencana sistem Quality Control/ Quality Assurance untuk menjamin kepuasan Pelanggan melalui kualitas produk, Klaim Pelanggan, menindaklanjuti dan berkoordinasi untuk penolakan dari inspeksi pengiriman, penanganan Kontrol Pemasok, dll 

Tugas Pekerjaan:

• Mempersiapkan Audit Eksternal/Internal (Audit ISO/Audit Pelanggan/Audit Perusahaan Grup)
• Melakukan verifikasi klaim pelanggan barang dikembalikan, menyediakan & membantu produksi dalam Kualitas Produk
• Memantau umpan balik kualitas produk bersama dengan tim produksi untuk menjaga kualitasnya
• Memantau dan memverifikasi keluhan pelanggan untuk menganalisis akar penyebab peningkatan kualitas
• Melakukan uji coba untuk sampel baru atau pemasok baru untuk memenuhi spesifikasi kualitas
• Mengembangkan SOP, WI untuk peningkatan proses terkait kualitas dan pengetahuan standar untuk produk baru
• Mengembangkan dan menetapkan spesifikasi kualitas untuk produk
• Mengawasi kualitas lini produksi.
• Menganalisis masalah kualitas yang ditemukan di lapangan.
• Berkoordinasi dengan departemen terkait mengenai masalah kualitas yang ada.
• Melaksanakan dan memantau hasil keputusan terhadap kualitas hasil produksi
• Buat rencana aksi untuk menghilangkan masalah – PICA (Continual Improvement)
• Menyiapkan laporan dan menandatangani dokumen sesuai prosedur yang ada
• Membuat laporan kualitas mingguan/bulanan

Persyaratan:

• Kandidat harus memiliki setidaknya Gelar Sarjana di Teknik Metalurgi, Teknik Industri, Teknik Mesin atau terkait dari universitas terkemuka.
• Setidaknya 3 Tahun pengalaman kerja di bidang terkait diperlukan untuk posisi ini.
• Memiliki keahlian di bidang teknik mesin terutama dalam sistem otomasi, desain bagian/mekanisme bergerak kecil, robotika presisi tinggi, proses manufaktur, dan mekatronik.
• Akurat, perhatian terhadap detail, bijaksana, dan cepat belajar adalah suatu keharusan.
• Memiliki keterampilan interpersonal, kepemimpinan, dan resolusi konflik yang sangat baik.
• Memiliki kreativitas, logika, visi, dan keterampilan pemecahan masalah yang luar biasa.
• Memiliki kemampuan komunikasi yang baik dalam bahasa Inggris baik lisan maupun tulisan.
• Bersedia bekerja di Tangerang, Banten

Pertanyaan dari perusahaan

• Memastikan kualitas barang produksi sesuai standar perusahaan.
• Merekomendasikan pengolahan ulang produk-produk yang memiliki kualitas rendah.
• Memastikan dokumentasi inspeksi dan tes produk perusahaan.
• Bertanggung jawab terhadap pembukuan personal QC.