• Check and review structural document
• Calculate structural project
• Site checking with Deputy Manager
• Check shop drawings
• Produce minutes of meetings

• Check and review shop drawings
• Calculate MEP requirement
• Site check and coordination
• Produce minutes of meetings

A.  Qualifications:

• Minimum education: SMK (Vocational High School) in Electrical Engineering, D3 Electrical, or S1 Electrical Engineering
• Strong and adequate physical condition
• Maximum age of 30
• Expertise in low and high voltage electrical systems and electronic equipment
• Proficient in handling generators, main panels, electrical network installations, also create or develop electrical systems also blueprints.
• create, calculating and develop electrical schematics (wiring diagram, SLD, Electrical Block Diagram), as well as maintenance and repairs
• Able to work both in a team and individually
• Able to work under pressure
• Willing to handle tasks outside of electrical work that are part of the FEM (Facility, Equipment & Maintenance) division
• Willing to work in shifts and available for on-call duty outside of normal working hours
• Interview will be conducted online
• Male applicants only
• Must be domiciled in the Subang area, West Java (Prioritize for Pusakanagara, Sukra, Pamanukan, Compreng, Bojong, Ciasem and surrounding)

Preferred Qualifications:

• Strong understanding of electrical theory and practice
• Knowledgeable in electrical distribution panel assembly
• Proficient in using AutoCAD software
• Minimum of 3 years of experience
• Possession of a professional engineer certification or relevant professional qualification certificate is highly preferred (LSP/BNSP or equivalent)
• Basic understanding of pump control systems and plumbing
• Familiarity with IP CCTV systems, door access, and other automation systems
• Holder of a valid SIM A (driver's license)

B.  Job Description:

Responsibilities include:

• Developing and adhering to technical specifications and electrical engineering standards
• Integrating electrical systems with other systems, such as machinery or software, to ensure seamless operation
• Diagnosing electrical system faults, proposing solutions, and performing repairs
• Ensuring on-site electrical engineering practices comply with safety regulations and industry standards
• Repairing electrical panel boxes and cable connections
• Conducting regular inspections and general electrical maintenance

We are looking for IT Staff who will ;

·      Assisting in troubleshoot employee’s laptop or other IT’s assets issue both hardware and software for all Staff including all Ships.

·      To assist preparing new/replacement laptop or other IT requirements for the office for all for all Staff including all Ships

·      Managing existing IT’s company assets.

o  Install, configure, and maintain computer systems, software, printers, and other peripherals (NAS, CCTV and Network devices)

o  Monitor and maintain antivirus and endpoint protection systems.

o  Maintain Microsoft Outlook for company emails

·      To assist in monitoring Crewing Management System.

·      To assist in company’s promotional items.             

o  Create graphics, layouts, and branding materials for internal or external use.

o  Collaborate with other departments to design user-friendly interfaces or presentations.

·      As a runner for IT’s purchasing / maintenance matter.

Melakukan pemeliharaan Komputer, jaringan, dan telephone agar berjalan dengan baik

-

• Server Performance Monitoring: Proactively monitor server performance within a 24/7 environment to ensure systems are operating smoothly.
• Issue Resolution: Address and resolve server-related issues within specified timeframes in accordance with Service Level Agreements (SLAs).
• Troubleshooting: Identify and resolve server issues, including those related to the operating system and server applications.
• Documentation and Reporting: Prepare routine reports on server performance and status using Office applications (Excel, Word).

• Develop and provide tool / transferred toll/ back up tools to support from new toy development stage through running in production stage
• Ensure tools are running as quoted in the tool plan
• Review tool and part design for any modification
• Conduct mold trial, verify and release approval document to production.

1. Work with certain parties in Manufacturing and Regional Site to develop new product in accordance with regulation Global Regulation and International Toys Safety Regulation Standards.
2. Create quality testing standard method
3. Ensure and maintain company high level reliability on toy development to meet corporate requirement
4. Prepare certification package prior to product release to production
5. Responsible to cover some QC function to support smooth production operation.

1. Develop method and process for painted new toy production.
2. Lead for piloting new toy and ensure the process is proper based on methods, tools, layout and process buyoff.
3. Contribute on design tooling and machinery for painted part accessories of new toys to achieve
4. Improve automation technology within process engineering with focusing on safety, quality, reliability and productivity.

• Mengevaluasi efektivitas teknologi, perangkat lunak, atau peralatan dan mesin yang digunakan saat ini untuk meningkatkan produktivitas dan kualitas teknologi terkait.
• Menganalisis prosedur dan praktik yang diterapkan saat ini untuk mengidentifikasi area yang memerlukan perbaikan.
• Berkoordinasi dengan tim teknis untuk membuat atau update sistem, perangkat lunak, atau peralatan lainnya.
• Menetapkan jadwal dan deadline tim untuk setiap project agar dapat mencapai target.

1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

Some of your duties will include:

·        Coordinate and oversee airport operations to ensure efficiency and compliance with regulations. This includes managing flight schedules, ground services, and coordination between different departments.

·        Direct aircraft movement using hand signals and communication devices.

·        Guide aircraft to and from parking positions, gates, and maintenance areas.

·        Ensure proper alignment of aircraft for safe docking and undocking.

·        Supervise and regulate movement traffic on the apron.

·        Coordinate with air traffic control, pilots, and ground staff to facilitate smooth aircraft movement.

·        Provide accurate instructions and updates regarding aircraft positioning and status.

·        To ensure the safety of the movement of people, equipment and aircraft on the apron.

·        To Analyze all activities on the apron during peak hours and plan aircraft parking arrangements in an emergency case.

·        To ensure that the facilities on the apron are in good condition.

·        To evaluate and coordinate operational activities on the apron and able to communicate with pilots in terms of regulating aircraft movement on the apron, especially for airside movement service personnel on duty in the tower.

·        Assist in the coordination of refueling, servicing, and loading/unloading of aircraft.

·        Support other ground operations tasks as needed, including the management of ground equipment.

Some of your duties will include:

• To supervise the technical aspects of operation and to give engineering level support to maintenance and operations with respect to the various Steam Systems across the smelter and at the Powerhouse area in particular, plus various Utilities Systems across the site. This will be done through in-depth analysis of machine performance, processes and output to influence condition monitoring and predictive maintenance as well as technical training to increase productivity and plant availability.

• To supervise flawless operation of the Plant Information (PI) System for plant-wide monitoring and analysis of digitized data pertaining to all process plants and associated utilities. 

• To supervise implementation of Standard Operating Procedures, and relevant statutory, safety, health and environment norms. 

• To monitor performance and enable continuous training of the technical team supporting Steam System and Utilities operation.

• To undertake the gold & silver reduction, gold and silver electro refinery, process at the Precious Metal Refinery (PMR) at Amman Mineral Industri towards the production of gold bars of stipulated purity range along with other quality specifications after subsequent processes.

• To achieve norms of productivity and learn continuously towards improvement of technical competencies and multiskilling.

• Supervise and provide feedback to the customer service team, ensuring smooth daily operations.
• Provide support to customer service staff when needed, assisting with complex tasks and resolving issues.
• Investigate and resolve customer complaints, ensuring consistently high levels of customer satisfaction.
• Effectively manage ticketing flow and coverage to ensure efficient handling of customer inquiries.
• Train team members on customer service best practices and company policies maintain high-quality service standards.
• Oversee the development and implementation of service policies, keeping both staff and customers informed.
• Maintain accurate documentation of customer service activities and compile performance reports.
• Collaborate with the Support team to ensure excellent service delivery and seamless coordination between teams.

Pengemudi barang atau supir pengiriman bertugas mengangkut barang dari satu tempat ke tempat lain sesuai dengan jadwal dan rute yang telah ditentukan. Berikut beberapa tugas dan tanggung jawab,

• Mengangkut dan menurunkan barang dengan aman 
• Memastikan barang sampai ke tujuan tepat waktu 
• Berkendara sesuai dengan peraturan lalu lintas 
• Menjaga kondisi kendaraan dan memperbaikinya jika terjadi kendala 
• Memiliki SIM A/B1
• Mengetahui rute dan peta 
• Memastikan barang dikirim dalam kondisi baik 
• Melakukan check awal sebelum kendaraan dioperasikan 
• Melakukan check terhadap barang yang akan dimuat dan dikirim 
• Menjaga kebersihan kendaraan

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)