A.  Qualifications:

• Minimum education: SMK (Vocational High School) in Electrical Engineering, D3 Electrical, or S1 Electrical Engineering
• Strong and adequate physical condition
• Maximum age of 30
• Expertise in low and high voltage electrical systems and electronic equipment
• Proficient in handling generators, main panels, electrical network installations, also create or develop electrical systems also blueprints.
• create, calculating and develop electrical schematics (wiring diagram, SLD, Electrical Block Diagram), as well as maintenance and repairs
• Able to work both in a team and individually
• Able to work under pressure
• Willing to handle tasks outside of electrical work that are part of the FEM (Facility, Equipment & Maintenance) division
• Willing to work in shifts and available for on-call duty outside of normal working hours
• Interview will be conducted online
• Male applicants only
• Must be domiciled in the Subang area, West Java (Prioritize for Pusakanagara, Sukra, Pamanukan, Compreng, Bojong, Ciasem and surrounding)

Preferred Qualifications:

• Strong understanding of electrical theory and practice
• Knowledgeable in electrical distribution panel assembly
• Proficient in using AutoCAD software
• Minimum of 3 years of experience
• Possession of a professional engineer certification or relevant professional qualification certificate is highly preferred (LSP/BNSP or equivalent)
• Basic understanding of pump control systems and plumbing
• Familiarity with IP CCTV systems, door access, and other automation systems
• Holder of a valid SIM A (driver's license)

B.  Job Description:

Responsibilities include:

• Developing and adhering to technical specifications and electrical engineering standards
• Integrating electrical systems with other systems, such as machinery or software, to ensure seamless operation
• Diagnosing electrical system faults, proposing solutions, and performing repairs
• Ensuring on-site electrical engineering practices comply with safety regulations and industry standards
• Repairing electrical panel boxes and cable connections
• Conducting regular inspections and general electrical maintenance

• Check and review shop drawings
• Calculate MEP requirement
• Site check and coordination
• Produce minutes of meetings

• Server Performance Monitoring: Proactively monitor server performance within a 24/7 environment to ensure systems are operating smoothly.
• Issue Resolution: Address and resolve server-related issues within specified timeframes in accordance with Service Level Agreements (SLAs).
• Troubleshooting: Identify and resolve server issues, including those related to the operating system and server applications.
• Documentation and Reporting: Prepare routine reports on server performance and status using Office applications (Excel, Word).

1. Work with certain parties in Manufacturing and Regional Site to develop new product in accordance with regulation Global Regulation and International Toys Safety Regulation Standards.
2. Create quality testing standard method
3. Ensure and maintain company high level reliability on toy development to meet corporate requirement
4. Prepare certification package prior to product release to production
5. Responsible to cover some QC function to support smooth production operation.

• Develop and provide tool / transferred toll/ back up tools to support from new toy development stage through running in production stage
• Ensure tools are running as quoted in the tool plan
• Review tool and part design for any modification
• Conduct mold trial, verify and release approval document to production.

1. Develop method and process for painted new toy production.
2. Lead for piloting new toy and ensure the process is proper based on methods, tools, layout and process buyoff.
3. Contribute on design tooling and machinery for painted part accessories of new toys to achieve
4. Improve automation technology within process engineering with focusing on safety, quality, reliability and productivity.

Job Responsibilities:

• Provide 1st / 2nd level of helpdesk support to our international clients via phone, chats, or emails in a timely and professional manner.
• Ensure incidents are logged and updated in the Zendesk ticketing system.
• Monitor all ticket statuses in Zendesk and ensure issues are followed through and closed satisfactorily.
• Build a good rapport with clients.
• Learn and achieve a good understanding of product features.
• Diagnose and resolve technical problems, escalate complex issues to appropriate teams when necessary.
• Guide customers through troubleshooting steps and provide clear and concise instructions.
• Document customer interactions, technical solutions, and troubleshooting steps.
• Collaborate with cross-functional teams, including Engineering and Product Management, to resolve technical issues and improve product functionality.
• Perform testing tasks based on Use Case scenarios.
• Work in Batam/Bandung office
• No hybrid/remote/WFH options
• 
  
• Job Requirements:
•  
• Good command of English is a must.
• Educational background in IT software is required.
• Knowledge of support framework best practices.
• Minimum of 2 years of experience in a technical customer support or application customer support role, preferably in a software or technology company.
• Strong technical aptitude and troubleshooting skills, with the ability to analyze and solve complex technical problems.
• Excellent communication skills, both written and verbal, with the ability to communicate technical information to non-technical users effectively.
• Ability to work independently and collaboratively in a fast-paced environment.
• Proficiency in using SQL commands.
• Proficiency in using a ticketing system such as Zendesk will be an advantage.
• Ability to communicate (verbally and in writing) with Mandarin-speaking clients will be an advantage.
• Willingness to work overtime when necessary.

Other Info:

• 5 days work per week
• Job Types: Full-time, Contract
• Insurance

1. Establish proven method of new product which can be produced in Mass production
2. Involve in molded part and accessory development.
3. Establish and release internal documents to support the product specification until material procurement

Deskripsi pekerjaan :

• Mempelajari dan menguasai produk Perusahaan berikut sistem operasi yang digunakan
• Melakukan implementasi produk termasuk setup system, training dan supervisi kepada klien
• Melakukan implementasi di project dalam/luar kota/negeri secara teratur
• Membuat laporan pertanggungjawaban atas hasil implementasi yang dikerjakan
• Menjaga hubungan baik dengan client/customer

• Responsible as the first point of contact for issues raised by customers
• Troubleshoots issues regarding cloud environments
• Manage and monitor Cloud environments.
• Document issues and interactions with customers

• Design, develop, and maintain data pipelines, ETL processes, and data warehouses.
• Ensure data quality, integrity, and reliability throughout the data pipeline.
• Work with GCP services such as Google Cloud Storage, BigQuery, Dataflow, and Pub/Sub to architect and implement scalable and efficient data processing solutions.
• Monitor and troubleshoot data pipeline issues.
• Implement security and access controls to protect sensitive data and ensure compliance with data privacy regulations.
• Document data processes, data flows, and architectural decisions.

Technical Account Manager will be responsible for managing all pre-sales projects that are customer's related.

Job Descriptions

• Manage new and existing customer request
• Assist the sales team in delivering daily proposal to client
• Monitor the on going client-related project up to finishing and documentation
• Collaborate with the related department in delivering client to product activation
• Learn for new technology related to cloud and virtualization management, migration, and deployment

Pengemudi barang atau supir pengiriman bertugas mengangkut barang dari satu tempat ke tempat lain sesuai dengan jadwal dan rute yang telah ditentukan. Berikut beberapa tugas dan tanggung jawab,

• Mengangkut dan menurunkan barang dengan aman 
• Memastikan barang sampai ke tujuan tepat waktu 
• Berkendara sesuai dengan peraturan lalu lintas 
• Menjaga kondisi kendaraan dan memperbaikinya jika terjadi kendala 
• Memiliki SIM A/B1
• Mengetahui rute dan peta 
• Memastikan barang dikirim dalam kondisi baik 
• Melakukan check awal sebelum kendaraan dioperasikan 
• Melakukan check terhadap barang yang akan dimuat dan dikirim 
• Menjaga kebersihan kendaraan

PT. INTERNUSA TECHNOLOGY Saat ini membutuhkan IT Support untuk wilayah BREBES-TEGAL dan sekitarnya, dengan tugas melakukan maintenance computer hardware dan software, jaringan, cctv.

Tanggung Jawab Pekerjaan :

Melakukan Maintenance perangkat komputer

Melakukan Maintenence Printer

Melakukan maintenance CCTV

Melakukan Maintenance Jaringan Komputer

Keahlian :

Networking

Troubleshooting

Instalasi Software

Instalasi Komputer

Memahami Jaringan LAN/WAN

Mengerti CCTV

Mengerti Komputer

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

Qualification :

• Having experience minimum 3 years in Data Support & Inventory Control
• Prior experience in retail would be advantageous.
• Familiar with retail system / POS system
• Fast typing skills
• Have a good experience with spreadsheets (MS Office Word, Excel, etc.)
• Basic understanding of databases.
• Basic math skills.
• The ability to document accurately.
• Good command of English both oral and written.
• Great interpersonal and communication skills.
• Great attention to detail.
• Good time-management skills.
• Sense of ownership and pride in your performance and its impact on the company’s success.
• Team-working skills.
• Min. diploma or bachelor's degree or equivalent
• Placement Badung-Bali

Job Description:

• To find good resource of vendors when needed.
• Purchase new or additional stock, or prepare documents that provide for such purchases.
• Compile, review, and maintain data from purchase orders, requisitions, and other documents in order to assess supply needs.
• Ensure stock availability
• Manage cycle counts/ stocktake of product inventories on a regular basis
• Verify inventory computations by comparing them to physical counts of stock, and investigate discrepancies or adjust errors.
• Preparing reports for the management stating trends, patterns, and predictions using relevant data

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software