Total 87 Engineering job vacancies in Jl. Ringroad Selatan, Wojo, Rt 004/rw 000 Bangunharjo, Sewon, Bantul

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in preparing Drainage Drawing and details and/or foundation drawing in EPC Project.
• Capable to provide 3D Model using SP3D and AP3D.
• Experience in using AutoCAD.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Melaksanakan pekerjaan Produksi

• Melakukan pemeliharaan dan perawatan listrik dan mesin.
• Menganalisa kerusakan yang terjadi pada listrik dan mesin (troubleshooting).
• Membaca dan memahami gambar teknik mekanikal/elektrikal.
• Instalasi peralatan mekanikal elektrikal.

1. Melakukan perbaikan maintenance pabrik
2. Melakukan pabrikasi
3. Melakukan pengelasan dan pemotongan
4. Dan lainnya yang berhubungan dengan maintenance pabrik dan pengalaman maintenance dipabrik kelapa sawit.

STAFF ENGINEERING

Sales Textile Chemicals

Melakukan penjualan sesuai target yang ditetapkan

Melakukan pelaporan kujungan ke Customer

Membina hubungan ke Customer

Ikut memonitor pembayaran Customer

Pembuatan dan Kontrol Dokumen

Job Responsibilities:

• Perform maintenance and programming for Delta V DCS & SIS.
• New challenge for data analytics with process, instrumentation, and other data.
• Design, build, and maintain data infrastructure.
• Build and manage systems that can easily extract data and transform it into data storage solutions such as data warehouses.
• Maintain DCS, IT system, and field instrumentation in factory with team.

Primary Responsibilities:

• Establish and maintain seamless co-ordination & co-operation with all departments  to ensure maximum cooperation, productivity, morale and guest service.
• Provide effective support to the team to enable them to deliver effective and efficient services.
• Respond to customer queries by resolving issues in a timely and efficient manner to ensure customer satisfaction.
• Motivate and develop staff to ensure smooth functioning of the department.

• Ensure that the team is trained for all safety provisions.
• Ensure optimal, cost effective use of the resources and educate the team on the same.
• Check and ensure that the temperature of cold stores, public areas etc. are maintained as per the specifications.
• Check and ensure the working condition of fire detectors, fire fighting systems, transformers, electrical systems, etc.
• Coordinate with other departments for regular servicing and testing of equipment.
• Check and ensure that proper safety measures have been adhered to and also ensure maintenance of all fire fighting equipment.
• Ensure that all the first aid kits are available for use in their proper places.
• To supervise the operations of Air-conditioning plant, boilers, pumps etc.
• Ensure that desired level of water is maintained in water storage tanks.
• Ensure correct maintenance of all equipment in conjunction with the other user departments & stay abreast of technological advances in surveillance & safety equipment.

• Providing technical support of Bosch Rexroth IoT Solutions.
• Analyzing the gap of technical requirement from customer.
• Working closely with international team for troubleshooting and technical support activity.
• Working hands-on with BR IoT kit to develop Industry 4.0 PoC Project.
• Working collaboratively with the team for marketing and media activity.
• Providing Technical training of Bosch Rexroth IoT Solution 

MECH PET Officer has primary responsibility to keep and maintain the performance of mechanical, civil, and building facilities in PET plant.

Job Description:

• Monitor device availability using monitoring tools, making report to Lead team every 1 hours

• Take notes and provide reports, daily reports and ticketing

• Carry out daily physical health check monitoring for each device

• immediate information and assistance as needed

• Perform security execution steps based on analysis from L2

PT Sentratek Adiprestasi adalah Perusahaan di bidang industri heavy-duty yang mendalami alat penanganan mekanis untuk memindahkan barang dalam jumlah besar atau biasa disebut dengan conveying system (sistem pengangkutan). Sudah lebih dari 35 tahun Perusahaan kami berkembang dan mengalami peningkatan yang signifikan. Guna memenuhi kepuasan pelanggan dan memastikan kualitas yang stabil kami mencari kandidat yang berkompeten untuk bergabung bersama kami.

Tanggung Jawab

1. Mampu melakukan presentasi product maupun project.
2. Aktif melakukan customer visit untuk mencari tahu kebutuhan customer, mencari data dan membina hubungan yang mendalam.
3. Melakukan kegiatan sales mulai dari penawaran, proses marketing, tender (Mengetahui doc CSMS), dan penjualan.
4. Mampu menganalisa pasar.
5. Dapat membuat rencana kerja dengan Baik.
6. Teliti, Jujur, Semangat tinggi & Disiplin.
7. Mengikuti Perkembangan Teknologi Marketing.
8. PENEMPATAN JAKARTA

PT Sentratek Adiprestasi adalah Perusahaan di bidang industri heavy-duty yang mendalami alat penanganan mekanis untuk memindahkan barang dalam jumlah besar atau biasa disebut dengan conveying system (sistem pengangkutan). Sudah lebih dari 35 tahun Perusahaan kami berkembang dan mengalami peningkatan yang signifikan. Guna memenuhi kepuasan pelanggan dan memastikan kualitas yang stabil kami mencari kandidat yang berkompeten untuk bergabung bersama kami.

Tanggung Jawab

1. Mampu melakukan presentasi product maupun project.
2. Aktif melakukan customer visit untuk mencari tahu kebutuhan customer, mencari data dan membina hubungan yang mendalam.
3. Melakukan kegiatan sales mulai dari penawaran, proses marketing, tender (Mengetahui doc CSMS), dan penjualan.
4. Mampu menganalisa pasar.
5. Dapat membuat rencana kerja dengan Baik.
6. Teliti, Jujur, Semangat tinggi & Disiplin.
7. Mengikuti Perkembangan Teknologi Marketing.
8. PENEMPATAN SURABAYA.

• Setting and achieving sales goals.
• Looking for a new leads from existing and new potential customer according to the Product portfolio
• Plan detailed and provide comprehensive technical presentation to the customer
• Generating high-quality sales leads, following up after initial contact, securing and renewing orders, completing sales and arranging deliveries.
• Researching, developing and modifying products to meet customer’s technical requirements and needs.
• Help customer who have problem with installed product and recommending improved machinery.
• Soliciting and logging client feedback and evaluating the data to create new sales and marketing strategies to target customer.
• Identifying areas for improvement and communicating the issued for possible solution.