Total 20 Maintenance / Repair job vacancies in Cikarang Selatan

• Dapat melakukan perawatan mold dan dies, seperti preventive, periodical mold & dies.
• Dapat menggunakan alat ukur (caliper, micrometer, dial gauge, height gauge, dan pin gauge).
• Dapat menggunakan alat machining (surface grinding, lathe, dan milling).
• Memiliki keahlian dalam membaca drawing teknik / struktur design.
• Memiliki keahlian menggunakan TIG welding / laser welding menjadi nilai tambah.
• Dapat bekerjasama secara individu dan tim, cepat belajar, dan memiliki komunikasi baik
• Dapat membuat ide kaizen/improvement, Aktifitas Safety & 5S, etc

Tugas & tanggung jawab

• Belajar untuk melakukan teknis pekerjaan pneumatic sistem kapal.
• Apabila mampu menguasai pekerjaan & mahir, kedepannya akan dijadikan kepala untuk tim pekerjaan pneumatic.

Kualifikasi Kebutuhan Teknisi Maintenance:

- Laki-laki, usia maksimal 35 tahun

- Pendidikan minimal SLTA sederajat

- Bersedia bekerja full time senin-kamis pukul 07:20 s/d 16:30 dan jum'at 07:20 s/d 17:00, sabtu minggu hari libur

- Memiliki pengalaman min 1 tahun di bidang yang sama 

-Bisa penanganan trouble shooting mesin produksi, mengerti kelistrikan industri,preventive maintenance mesin dan ulilities pabrik untuk preventive and maintenance

-- Memiliki kemampuan analisa yang baik, detail, teliti dan terbiasa bekerja secara individu maupun team

- Bersedia ditempatkan di Kawasan GIIC Blok AA Kota Deltamas-Cikarang Pusat

Kualifikasi Kebutuhan Operator Maintenance:

- Laki-laki, usia maksimal 35 tahun

- Pendidikan minimal SLTA sederajat

- Bersedia bekerja full time senin-kamis pukul 07:20 s/d 16:30 dan jum'at 07:20 s/d 17:00, sabtu minggu hari libur

- Memiliki pengalaman min 1 tahun di bidang yang sama 

-Bisa bubut, miling, grinding, bisa repair dies, buat jig simple, preventive dies.

- Bersedia ditempatkan di Kawasan GIIC Blok AA Kota Deltamas-Cikarang Pusat

PT. Binayasa Putrabatara merupakan perusahaan yang bergerak dibidang building management, jasa konstruksi dan pengadaan property membutuhkan Teknisi Maintenance Gedung

Tanggung Jawab Pekerjaan :

Melakukan kegiatan perbaikan dan pemeliharaan mekanikal elektrikal, sipil, plumbing dan AC gedung

Melaksanakan pekerjaan sesuai standart yang sudah ditetapkan

Maintenance aset fisik gedung

Keahlian :

Memahami sistem kelistrikan, mekanikal, dan plumbing yang ada di gedung.

Mampu melakukan perbaikan pada peralatan dan sistem gedung, seperti AC, pemanas, dan sistem ventilasi.

Kualifikasi :

– Kandidat harus memiliki setidaknya SMA/SMK di Teknik (Elektro), Teknik (Lainnya), Teknik (Mekanikal), Teknik Sipil atau setara.

– Setidaknya memiliki 1 tahun pengalaman dalam bidang yang sesuai untuk posisi ini.

– Lebih disukai Pegawai (non-manajemen, non-supervisor) khusus dalam Teknik – Lain-lain atau setara.

– Bersedia ditempatkan diseluruh wilayah Indonesia (Jabodetabek)

Tugas Pokok :

1. Melakukan pekerjaan teknisi untuk service maintenance, trouble shooting, dan overhaul
2. Melakukan pekerjaan persiapan & test commisioning (Branch & Project Support)
3. Melakukan assembly unit
4. Memberikan pelaporan hasil pekerjaan secara daily

Tugas Tambahan :

1. Bersedia melakukan perjalanan dinas ke luar kota kapanpun dibutuhkan

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Batam

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Medan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Unit Cabang Balikpapan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

1. Melakukan perbaikan maintenance pabrik
2. Melakukan pabrikasi
3. Melakukan pengelasan dan pemotongan
4. Dan lainnya yang berhubungan dengan maintenance pabrik dan pengalaman maintenance dipabrik kelapa sawit.

• Melakukan briefing bersama supervisor dan kepada bawahannya.
• Mengalokasikan tenaga mekanik yang dibutuhkan pada shift yang bersangkutan, termasuk untuk penugasan lembur.
• Melakukan inspeksi mesin yang beroperasi di bagian produksi dan melakukan tindakan yang sesuai jika dibutuhkan.
• Mengkomunikasikan kerusakan mesin kepada supervisor produksi yang bertugas untuk rencana perbaikannya.
• Melakukan troubleshooting:
• Menganalisa penyebab kerusakan pada mesin.
• Melakukan perbaikan pada mesin jika terjadi breakdown.
• Aktif menindaklanjuti hasil temuan dari program audit, seperti Red Tag, GMP, EHS, TPM, dan dari aplikasi shopfloor audit.
• Melakukan perawatan dan perbaikan:
• Membawa sparepart yang rusak atau membutuhkan perawatan ke workshop untuk diperbaiki.
• Memperbaiki varian-varian spareparts yang rusak.
• Melakukan aktivitas Preventive Maintenance mesin-mesin SPAMI sesuai dengan jadwal yang telah ditetapkan.
• Membuat catatan aktifitas harian mekanik.
• Membuat laporan Preventive Maintenance dan melakukan “Technical Completion” (TECO) untuk Work Order Number (WO) PM di SAP untuk aktifitas PM yang sudah selesai dikerjakan.
• Ikut serta dalam pembuatan perencanaan perawatan mesin (inspeksi, pergantian spareparts, service dan maintenance).
• Memberikan pengarahan dan pembinaan kepada bawahan jika diperlukan.
• Memelihara dan merawat peralatan kerja.
• Bertanggungjawab terhadap aktifitas troubleshooting.
• Bertanggungjawab terhadap aktifitas maintenance-repair.
• Bertanggungjawab terhadap aktifitas Preventive-Maintenance.
• Bertanggungjawab atas pengalokasian tenaga mekanik yang dibutuhkan.
• Menentukan dan memutuskan perbaikan mesin, beserta penggantian sparepart yang rusak untuk menghindari breakdown yang tinggi.
• Mengalokasi tenaga mekanik yang dibutuhkan untuk menghindari situasi kerja yang tidak maksimal.

1. Support produksi terkait kondisi dan operational equipment dia area plant dan bangunan.
2. Melakukan operasional, perawatan berkala, perbaikan, dan follow up work order pada fasilitas dan bangunan
3. Support aktivitas vendor di lingkup facility

1. Set up dan operasional mesin molding
2. Mempelajari mesin serta permasalahan yang dihadapi ketika setting dan pergantian mold
3. Inisiasiuntuk melakukan koreksi jika ditemukan masalah
4. Membuat laporan yang detail dan jelas terkain insiden yang dihadapi langsung ke superior

The Electronics Technician performs all tasks and duties of an technician discipline including but not limited to, installation or maintaining electrical control and instrumentation systems, i.e. electronics, programmable controllers, telecommunications, transmitters, and hydraulic, pneumatic systems. The Electronics Technician is responsible for all electrical and electronic instrumentation equipment pertaining to the drilling of the well, including circulating, rotating, hoisting and well control systems. The position is also responsible for uploading maintenance and repair data into a Maintenance Management System (MMS).

Essential Functions:

• Provide visible leadership with a Total Ownership attitude. Owns safety standards.
• Enforce, clarify, and follow Company and Client policies, standards, and procedures.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all IT discipline processes, procedures, and policies.
• Promote operational excellence through procedural discipline.
• Supervise and ensure the safety of those working under direct supervision.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed
• Ensure Client competency standards are applied and requirements followed.
• Understand LO/TO and Permit to Work procedures.
• Implement and administer computer software programs for data log and control including management of change and version controls on software.
• Read, understand and analyze drawings, schematics and equipment manuals
• Perform preventative and corrective maintenance on electrical /electronic equipment.
• Coordinate with Maintenance Lead on the maintenance, repair and refurbishment of equipment.
• Enter maintenance and repair data into the SAP Maintenance Management System (MMS)
• Create Notifications and Work Orders as required and enter into SAP maintenance system
• Ensure an adequate amount of critical instrumentation spare parts are on hand and serviceable at all times.
• Repair or replace defective or worn electrical/electronic/instrument parts.
• Troubleshoot miscellaneous electrical/electronic equipment.
• Foresee potential equipment malfunctions or failures and perform required repairs or adjustments to resolve the problem.
• Respond to emergencies as requested and coordinate onsite activities to utilize resources to facilitate repairs in the most expedient and cost effective manner.
• Splice wire with approved cutting device or cutting pliers and solder connections to fixtures, outlets and equipment.
• Test circuit connections using electrical test equipment.
• Participate with installations, repairs, troubleshooting, and maintaining high/low voltage electrical equipment. Also assist with maintenance on related devices including transformers, power panels, light fixtures, receptacles, and disconnect switches.
• Submit requisitions to Senior Toolpusher /Purchasing Coordinator for approval.
• Perform additional duties, responsibilities, and special projects as may be directed.

This position is responsible for planning, organizing, scheduling and managing daily maintenance operations and activities in assigned area.

Essential Functions:

• In coordination with Rig Manager and Maintenance personnel, arrange for availability of equipment planned maintenance.
• Directly involved in planning, developing and implementing modifications, capital repairs and improvements, recommending specifications and managing schedules for maintenance and maintenance contracts.
• Interact professionally and maintain effective working relationships with the management team to effectively meet departmental objectives.
• Coordinate activities with other rigs, programs and departments, including scheduling, coordinating and inspecting work performed by contractors.
• Respond to emergencies as requested and coordinate activities to utilize resources to affect repairs in the most expedient and cost effective manner.
• Monitor and report proper completion of al required data input including actual labor hours, comments, parts and supplies used in completing the Work Order.
• Assure conformance to all requirements of the Maintenance Management System including proper and timely completion of all work orders, unscheduled maintenance reports, failure analysis, root cause analysis and preventive measures.
• Participate in selecting third party facilities and repair services from approved vendor list as required in the region, based on Company requirements and regulatory standards.
• Write applicable maintenance procedures that promote defect-free maintenance work quality.
• Able and competent in root cause failure analysis leadership and investigations.
• Apply good stores management practices and parts management to ensure parts and equipment retain full reliability while stored.
• Schedule maintenance work into operations plan.
• Continually improving planning, scheduling, purchasing, stores, data management and job reporting systems to increase planning effectiveness and efficiency.
• Collaborate with maintenance supervision to schedule manpower and resources for the most effective production and maintenance outcomes.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the Company.
• Ensure key performance indicators are captured and reported for equipment reliability, maintenance department performance and planning and scheduling business flow process.
• Ensure that proper safety practices are followed in accordance with state and/or federal regulations and the Company’s HSE program.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

The Maintenance Supervisor is responsible to ensure that all maintenance and repairs of equipment are performed in a safe and efficient manner. The position is responsible for all drilling equipment pertaining to the drilling of the well. The position supervises onsite maintenance personnel to ensure that proper planning and scheduling of pre-determined maintenance is completed accordingly, including the availability of required parts.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude.
• Enforce, clarify, and follow Company policies, standards, and procedures while promoting operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations while ensuring the safety of those working under direct supervision.
• Coordinates with Rig Superintendent and Preventative Maintenance Coordinator on the maintenance, repair and refurbishment of equipment.
• Create applicable maintenance procedures that promote defect-free maintenance work quality.
• Responsible for reviewing, evaluating and maintaining maintenance schedules for equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Enters maintenance and repair data into a Maintenance management system (MMS)
• Provide onsite assistance and guidance to maintenance personnel with trouble shooting issues and repair.
• Monitor oil sample results and ensure recommendations are implemented onsite and reported accordingly.
• Track non-destructive testing and major maintenance to be performed at pre-determined intervals.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the company.
• Collaborate with maintenance team to schedule staffing and resources for the most effective productivity and timely completion of maintenance. Provide technical support for maintenance systems questions and problems.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all maintenance processes, procedures, and policies.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency is applied and followed
• Understand LO/TO and Permit to Work procedures.
• Maintain and update asset tags for onsite equipment.
• Maintain an adequate amount of spare parts are on hand at all times.
• Read and analyze electrical/mechanical drawings, schematics and equipment manuals.
• Perform annual assessments to evaluate performance, skills, qualifications and abilities of maintenance personnel.
• Perform additional duties, responsibilities, and special projects as may be directed.

- Min S1 from Electrical Engineering or related major

- Good in English (both speaking & writing)

- Having experience in the same field min 2 years with administrative work exposure

- Good in Microsoft Office/ Google Workspace

- Have experience in handling MV/HV Electricity

- Can work with auto CAD and read electrical drawing

- Ability to perform electricity load and capacity planning and calculation

• Memonitor dan bertanggungjawab atas kelancaran kegiatan yang Building & Maintenance.
• Memastikan kelayakan bangunan, baik head office maupun kantor cabang/regional/pool.
• Memastikan pengadministrasian terhadap hal-hal yang terkait dengan pemeliharaan bangunan kantor dan yang berhubungan dengan building dan ME maupun jaringan data/telp.

Uraiaan Pekerjaan:

1. Melakukan beberapa uji coba metode baru untuk produk baru berdasarkan standar yang ditentukan oleh Sika atau berdasarkan TDS atau instruksi dari R&D -QA
2. Untuk mengidentifikasi bahan pengganti yang dapat ditemukan secara lokal agar memenuhi standar produk.
3. Melakukan uji coba untuk meningkatkan kualitas produk sesuai dengan kebutuhan pelanggan.
4. Untuk membantu ahli kimia dalam mengembangkan, memproduksi, dan menggunakan produk kimia, peralatan, dan barang-barang terkait.
5. Melakukan berbagai prosedur rutin ke laboratorium secara akurat dan mengikuti metode yang ketat dalam melakukan analisis.
6. Mengembangkan atau menyempurnakan produk baru atau metode baru atau meningkatkan kualitas produk berdasarkan metode dan standar perusahaan.
7. Untuk membantu ahli kimia membuat produk akhir, memasang peralatan, dan melatih pekerja di lini produksi.
8. Melakukan uji laboratorium untuk menghasilkan data yang andal dan tepat guna mendukung penyelidikan ilmiah.
9. Mencatat dan menginterpretasikan hasil untuk dipresentasikan kepada kolega senior.
10. Melakukan pengujian dan inspeksi produk, layanan, atau proses untuk mengevaluasi kualitas atau kinerja.
11. Memberikan usulan/saran untuk beberapa modifikasi prosedur produksi untuk memenuhi kebutuhan produk.
12. Menguji bahan baku, metode, dan produk jadi untuk memastikan memenuhi standar.

• Supporting day-to-day activity for handling building maintenance and MAE maintenance.
• Managing factory facility, infrastructure services, and new project development.
• Doing HSE activity, which includes supporting on Safety Meeting & Safety
  Genba, supporting on Electrical Safety (ES-LO), manage security services, handling of hazardous material, hazardous waste (PPLI), and non-hazardous material (CV SLJ), and commercial process (EMS/QMS)
• Keeping and maintaining quality management system, such as Bosch Process Compass, IATF, SO45001, ISO14000, Legal Requirement, and Customer Need.
• Reporting of activities (daily, monthly, planned activities) and summarizing KPI & KPR achievement of each process.