Total 69 system engineer job vacancies in Others category in kedoya elok plaza blok dd no 76 kedoya selatan kebon jeruk jakarta barat

• Develop engaging and high quality content (photo, videos, or written content) for social media
• Assist in scheduling and publishing content based on social med workplan
• Monitor social media and engage the users (reply the comments, dm and etc)

• Following the kick of meeting with Sales Department, production, customers, and the Project Coordinator before starting the project.
• Receive technical documents from the Application Engineer and sales during the kick of meeting and implementation for project execution.
• Able to Conduct and lead the engineering phase until the engineering output (BOM and Drawing) is released.
• Able to Conduct and lead the preparation of inspections and test plans with the Quality Engineer.
• Become a company representative for every technical meeting and discussion with customers.
• Conducting site survey before the project is executed and issue an installation plan on sites.
• Become a commissioning test team, and record commissioning results for handover to customers/Operations.
• Recapitulation of inspection/test result documents into Fabrication Data Records in collaboration with Quality control and Application Engineers.
• Performing FAT at the vendor's facility before sending equipment to the Company.
• Perform technical coordination and manage vendors in technical terms.
• Become a Problem-Solving team if there is a problem with the equipment and systems supplied to the customer.
• Overseeing engineering for project execution from the initial handover at the kick of meeting to Commissioning and Handover.

Some of your duties will include:

·        Responsible to utilize strong engineering tools, applicable standards and scientifically references in managing mainly but not limited environmental aspect (water, emission, energy, waste); Developing and implementing strategies to ensure the mining operations and future projects comply with all applicable environmental regulations and industry best practices, optimizing environmental performance with sustainable operation; included but not limited to engage with stakeholders, manage data, review technical documents, assist in env audit and inspection, and provide robust report.

·        To develop, support, and/or review technical standard and technical studies for new project or improvement.

·        To manage, conduct and/or support in environmental engineering projects such as energy conservation, water conservation, emission reduction, waste mitigation, reuse and reutilization

·        To be accountable for water, waste, energy, and emission inventory across project site wide

·        To conduct Life Cycle Analysis (LCA) and GHG calculation using recognized scientifically and statistical tools.

·        To conduct, coordinate, and/or support water audit and energy audit,

·        To support ESG team in preparing sustainability reports and audit (SASB, OJK, IFC, ICMM, Copper Mark)

·        To engage with internal and external stakeholders during aspect impact session, construction plan review, contractor performance review, incident investigation, audit, inspection, and government inspection.

·        Advises line management regarding regulation, data trend and evaluation. 

·        Provide required resources to manage water accounting, waste inventory, energy inventory, emission inventory.

·        Develop and ensure technical standard and procedure related with water, emission, energy, and waste comply with company and International standards (ICMM, IFC, Copper Mark etc).

·        Responsible to the material preparation in 4 aspect review for management, government, and corporate officials during weekly report, management review etc.

·        Review contractor performance and proposed plan.

·        Assist student PKL.

Some of your duties will include:

·        Respond to emergencies that could cause injury to personnel or loss of production.

·        Monitor and reviews cost, establishes and maintain budgets and recommends the replacement or updating of equipment

·        Develop and evaluate plans and criteria for a variety of projects and activities and devise new approaches to problems encountered.

·        Plan and conduct surveys, tests or investigations, interpret results, and prepare recommendations, summaries, schedules, and cost estimates. Meet with representatives of other departments to coordinate planning and scheduling activities.

·        Oversee new installations, including modifications and new installation, start – up /commissioning.

·        Reviews maintenance schedules and coordinates with other departments to ensure optimal equipment and plant availabilities to meet business also that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Responsible for supervising all Electrical Instrument & Process control maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections, prepare STP’s (standard task procedures) and ensure that JHA`s (job hazard analysis) are performed prior to commencement of all tasks.

·        Directly supervises the Senior Supervisor, Supervisor, instrumentation, engineer process control and foreman shift on call, also coordinate activities between his/her foreman with the planning department to ensure that scheduled maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

Ensure and maintain all material storage areas to comply with company policies

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Responsible to support Process Operations & Maintenance in ensuring the optimal performance of mineral processing plants. This role focuses on the development, implementation, and maintenance of industrial systems and applications to enhance reliability, efficiency, and productivity across the plant.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

·        Ensure and maintain all material storage areas to comply with company policies.

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

• Plan, set, and deliver standards for learning.
• Prepare and support critical thinking for students in the classroom.
• Establish classroom management utilizing positive coaching.
• Observe and evaluate student's performance and development.
• Understanding of academic, social, and behavioral needs and characteristics of high-level students.
• Establish links with the parent community to ensure that parents are kept well informed about student progress.

• Plan, set and deliver standards for learning.
• Prepare and support critical thinking for student in classroom.
• Establish classroom management utilizing positive coaching.
• Observe and evaluate student's performance and development.
• Understanding of academic, social and behavioral needs and characteristics of high level student.
•  Establish links with the parent community to ensure that parents are kept well informed about student progress.

Job description:

· Develop new product production processes

· Improve existing production processes

· Formulate new product production process according to new product technical requirements, process requirements, and quality requirements

· Develop new product production operation instructions SOP

· Measure product standard production hours based on new product production processes and continuously improve

· Improve the production process of existing mass-produced products and increase efficiency

· Responsible for process docking of products transferred from headquarters

· Leading and responsible for trial production of new product PVT

· Lead the production process and be responsible for the product production process

· Lead PVT trial production and be responsible for the results of PVT trial production

Job description:

• Supervise the inspection and maintenance of machines and production facilities.

• Develop guidelines and instructions regarding maintenance and repair of production machines and equipment.

• Create and implement SOP for how to operate machines and production facilities.

• Troubleshooting damaged parts, optimizing processes, and taking corrective action.

• Create and prepare work instructions and machine parameter records for each product and production machine.

• Supervise the implementation of new mold and tools projects related to products and production machines.

• Supervise every work carried out in accordance with SOP and safety standards.

• Provide support related to projects and setting up industrial equipment.

• Carry out problem solving related to production equipment and machines.

• Proposing improvements for better results.

Job description:

· Carry out product structure design according to project planning

· Test and verify new products and Improve product structure

· 3D modeling design based on product technical requirements

· Produce 2D engineering drawings based on 3D modeling and process requirements

· Provide product mold opening 3D drawings and technical requirements to the mold department

· Make new product prototypes and verify product functions

· Work with the mold department to conduct design reviews before mold opening and follow up on the mold opening progress

· Lead and guide assistant engineers and technicians in making EVT samples and follow up on test results

· Lead the production of DVT samples and follow up on DVT test progress and results

· Responsible for assisting in solving various product design problems discovered during mass production

· Create project plans and implement them

· Lead the structural design of the project and have the main responsibility for the structural design

Mempersiapkan alat atau mesin produksi agar sesuai dengan proses yang direncanakan.

To contribute to the scholarship and intellectual life of the University by conducting University TriDharma as appropriate under Head of Department supervision. To  participate in the University and wider Department activities. The main responsibility includes the following :

• To engage in undergraduate teaching. The range of duties may vary from time to time but faculty are engaged primarily in lecturing. Some class teaching may also be required. 
• To conduct research, which enhances the School’s high academic reputation. Publication of articles in refereed journals or proceedings, author of book, book editing, module/lesson plan, book translation, and seminar/conference presenter/speaker are some alternative outcomes. 
• To manage as appropriate any research grants secured, including the recruitment and management of any research assistants. To be responsible for the timely delivery of associated research reports. 
• To engage in examining duties, i.e. the production of exam questions/papers, exam marking and moderation. 
• To participate in various Community Development activity approved by the University. 
• To act as academic advisor to students and to refer students to sources of pastoral support. 
• To participate in various University events as committee. 
• To implement other duties and tasks required by Faculty and/or Rectorate. 

Job Descriptions : 

• ERP Project Management: 

 - Lead and oversee the successful implementation of ERP projects from planning 

   through to execution and post-

   implementation support.

 - Manage project timelines, resources, budgets, and stakeholder expectations to 

   ensure project success.

 - Coordinate cross-functional teams to deliver ERP solutions that meet client 

   specifications and requirements.

• Business Process Analysis: 

 - Analyze and map existing business processes, identify inefficiencies, and 

   recommend improvements through ERP system customization.

 - Work closely with key stakeholders to ensure that the ERP system is configured to 

   meet the company’s business goals.

• System Design and Customization: 

 - Design ERP systems and modules based on business requirements, ensuring 

   compliance with local regulations.

 - Adapt and customize the ERP solution to handle changes in local business 

   regulations or industry standards.

• Regulatory Compliance: 

 - Ensure that the ERP system is consistently updated and modified in response to local 

   regulation changes, ensuring compliance across all areas of operation.

• System Testing and Quality Assurance: 

 - Oversee the system testing phase to ensure that the ERP solution functions correctly 

   and effectively, meeting all specifications.

 - Collaborate with technical teams to identify, address, and resolve any issues or bugs.

• Content Management: 

 - Manage system content updates and configuration changes, ensuring that data is 

   accurate and aligned with business requirements.

• Business Development Support: 

 - Provide ongoing support for business development teams, offering ERP system 

   insights and expertise to drive business growth and improve operational performance.

• Reporting and Documentation: 

 - Prepare detailed periodic reports on project progress, milestones, and outcomes for 

   internal and client stakeholders.

 - Ensure proper documentation is maintained for all phases of the ERP implementation 

   process.

Requirements :

 - A Bachelor’s Degree in Information Systems, Information Technology, Business, 

  Industrial Engineering, or a related field.

 - Minimum of 5 years of experience working as an ERP consultant, with a strong 

   preference for candidates with experience in the manufacturing industry.

 - Proven track record of managing and delivering successful ERP projects.

 - Strong Project Management skills with experience handling cross-functional teams 

   and ensuring projects are completed on time and within budget.

 - Solid understanding of ERP systems, system design, and configuration.

 - Ability to analyze and improve business processes with a focus on maximizing ERP 

   system performance.

 - Fluent in English (oral and written).

 - Proficiency in Bahasa Indonesia (oral and written).

 - Maximum age of 35 years.

 - Strong problem-solving skills and the ability to think critically in complex situations.

 - A positive attitude with a proactive, can-do mindset.

 - Excellent communication and interpersonal skills for effective collaboration with 

   internal teams, clients, and stakeholders.

 - Adaptable, with the ability to thrive in a fast-paced and dynamic environment.

Mastering building maintenance & structur, PLC and operate CNC Machine

Have knowledge AutoCad and Ms. Office

Able to speak in English

Some of your duties will include:

• To supervise flawless operation of the plant process data historian system (PI System) for archiving and visualization of real-time data pertaining to all process plants and associated utilities. 

• To maintain appropriate standards and best practices in network architecture, firewall configuration, remote backup, disaster recovery, failover configuration and interface design for all components of the PI system and all of its various interfaces (corporate network, DCS network, standalone data sources, other). 

• To maintain the PI Server and other PI software components in an up-to-date state, including software licensing 

• To maintain PI point naming conventions and regularly audit the PI database for efficient use of license capacity; to configure new PI points as required. 

• To deploy new PI modules, features and systems as required, facilitate training programs for new PI users and assist others to develop tools and systems using PI data and analytics. 

• To supervise implementation of Standard Operating Processes, and relevant statutory, safety, health, environment norms. 

• To monitor performance and enable continuous training of the technical services team supporting the site operations.

Some of your duties will include:

• To supervise the technical aspects of operation and to give engineering level support to maintenance and operations with respect to the various Steam Systems across the smelter and at the Powerhouse area in particular, plus various Utilities Systems across the site. This will be done through in-depth analysis of machine performance, processes and output to influence condition monitoring and predictive maintenance as well as technical training to increase productivity and plant availability.

• To supervise flawless operation of the Plant Information (PI) System for plant-wide monitoring and analysis of digitized data pertaining to all process plants and associated utilities. 

• To supervise implementation of Standard Operating Procedures, and relevant statutory, safety, health and environment norms. 

• To monitor performance and enable continuous training of the technical team supporting Steam System and Utilities operation.

• Plan, set and deliver standards for learning.
• Prepare and support critical thinking for student in classroom.
• Establish classroom management utilizing positive coaching.
• Observe and evaluate student's performance and development.
• Understanding of academic, social and behavioral needs and characteristics of high level student.
•  Establish links with the parent community to ensure that parents are kept well informed about student progress.

• knowledgeable and familiar with Dapodik System
• Familiar with School Accreditation process
• Have experience in dealing with government officer in relation with Dapodik and School Accreditation process.
• Produce and submit regular and other periodic report (monthly / semi-annual / annually) regarding all activities or issues within his/her area of responsibility.
• Develop, maintain and improve the relationship with relevant parties such as school staff and teachers, students, and parents and other stakeholder, to support the achievement of the position’s targets.
• Provide administrative support in preparing and administering exam paper.
• Undertake the routine of telephone duties, take messages, and arrange internal & external appointment/meeting.
• Be responsible for the school data base.
• Recommend improvement as based on the facts faced in the school daily operations to the school principal.
• Performs other work-related duties and ad hoc project as assigned by Supervisor.

• Use his/her academic expertise (knowledge, science & research) to solve society’s issue
• Ensure tasks are carried out within agreed timescales and budgets.
• Report (weekly/ monthly) to the faculty management and members the status of project progress against the plan schedule and provide corrective actions necessary if the planned schedule is not achieved.
• Submit planning report such as preparation of material procurement report in accordance with approved program.
• Work alongside with Laboratory Technical Engineer and faculty members on technical aspects of projects.
• Develop laboratory teaching modules for students.
• Work together with Technical Engineer and faculty members to teach the experiment modules for students.
• Ensure administrative job related to Lab run smoothly

The Lower Primary Homeroom Teacher creates a safe, engaging environment, providing pastoral care and designing and delivering lessons for comprehensive learning in English, Maths and Science. They aim to enhance students' intellectual, emotional, physical, and social growth, equipping them with skills for academic and societal success. 

• Familiar with delivering 3 (three) core subjects namely English, Mathematics, and Science
• Design, facilitate and manage learning activities, assessments, classroom management and student engagement to create a safe and stimulating educational setting. 
• Provide pastoral care and support the holistic development of students in grades 1 and/or 2, ensuring a nurturing atmosphere that promotes their intellectual, emotional, physical, and social growth. 
• Serve as a positive role model for students, upholding the school's mission and maintaining high standards of professional conduct and ethics. 
• Develop and maintain a constructive and ongoing rapport with children and parents

To promote SU and to recruit students according to the given target number from the management.

Responsibilities:

• To represent Sampoerna University at extensively at internal & external  recruitment events such as but not limited to: participate at an on and off-campus recruitment events, such as Open Days, Campus Tours, Workshops, etc.
• To build relation and network with selected target high school through the principle or councelors in order to reach potential students and parents in order to achieve target number of applciants that will lead to target number of committed students
• To deliver high quality presentations about Sampoerna University as well with give accurate information, advice and guidance to prospective students.
• Work closely with Student Recruitment Manager in identifying market as well with developing recruitment strategy to earn leads and conversions through activities.
• Input students data and application, follow up on all opportunity  or interested leads. Updating all students status on a daily and weekly basis.
• Coordinate with Admissions, Testing Center, Bursary and other related department to ensure all applications, applying and admitted students are dealt accordingly