Total 13 qc engineer job vacancies in jl perusahaan barat no17 tunjungtirto singosari malang

Some of your duties will include:

·        Responsible to utilize strong engineering tools, applicable standards and scientifically references in managing mainly but not limited environmental aspect (water, emission, energy, waste); Developing and implementing strategies to ensure the mining operations and future projects comply with all applicable environmental regulations and industry best practices, optimizing environmental performance with sustainable operation; included but not limited to engage with stakeholders, manage data, review technical documents, assist in env audit and inspection, and provide robust report.

·        To develop, support, and/or review technical standard and technical studies for new project or improvement.

·        To manage, conduct and/or support in environmental engineering projects such as energy conservation, water conservation, emission reduction, waste mitigation, reuse and reutilization

·        To be accountable for water, waste, energy, and emission inventory across project site wide

·        To conduct Life Cycle Analysis (LCA) and GHG calculation using recognized scientifically and statistical tools.

·        To conduct, coordinate, and/or support water audit and energy audit,

·        To support ESG team in preparing sustainability reports and audit (SASB, OJK, IFC, ICMM, Copper Mark)

·        To engage with internal and external stakeholders during aspect impact session, construction plan review, contractor performance review, incident investigation, audit, inspection, and government inspection.

·        Advises line management regarding regulation, data trend and evaluation. 

·        Provide required resources to manage water accounting, waste inventory, energy inventory, emission inventory.

·        Develop and ensure technical standard and procedure related with water, emission, energy, and waste comply with company and International standards (ICMM, IFC, Copper Mark etc).

·        Responsible to the material preparation in 4 aspect review for management, government, and corporate officials during weekly report, management review etc.

·        Review contractor performance and proposed plan.

·        Assist student PKL.

Some of your duties will include:

·        Respond to emergencies that could cause injury to personnel or loss of production.

·        Monitor and reviews cost, establishes and maintain budgets and recommends the replacement or updating of equipment

·        Develop and evaluate plans and criteria for a variety of projects and activities and devise new approaches to problems encountered.

·        Plan and conduct surveys, tests or investigations, interpret results, and prepare recommendations, summaries, schedules, and cost estimates. Meet with representatives of other departments to coordinate planning and scheduling activities.

·        Oversee new installations, including modifications and new installation, start – up /commissioning.

·        Reviews maintenance schedules and coordinates with other departments to ensure optimal equipment and plant availabilities to meet business also that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Responsible for supervising all Electrical Instrument & Process control maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections, prepare STP’s (standard task procedures) and ensure that JHA`s (job hazard analysis) are performed prior to commencement of all tasks.

·        Directly supervises the Senior Supervisor, Supervisor, instrumentation, engineer process control and foreman shift on call, also coordinate activities between his/her foreman with the planning department to ensure that scheduled maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

Ensure and maintain all material storage areas to comply with company policies

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Designing and calculations, maintaining, implementing, or improving downstream maintenance equipment products, facilities, components, or systems for industrial, commercial, or domestic purposes.

·        Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.

·        Conferring with other functions, engineers, and others to discuss existing or potential engineering products or projects.

·        Ensuring that installation and operations conform to standards and technical requirements by preparing mechanical systems specifications and technical drawings.

·        Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

·        Ensuring compliance with specifications, codes, or technical requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

·        Investigate component failures, communicating results to Operations and Associates to aid in increased levels of safe production

·        Oversee mechanical projects, new installations, including design, modifications and new installation start-ups, and shutdown.

·        Assist in developing and maintaining a preventative and predictive maintenance program

·        Writing reports and compiling data regarding existing and potential mechanical engineering projects and studies.

·        Preparing specifications for purchases of mechanical equipment and materials.

·        Estimating material, labor, or construction costs for budget preparation.

·        Directly supervise the maintenance work to ensure that plant and equipment running well to meet the milling production.

·        Set goals and coordinate the activities of with others Supervisor and Planner to ensure that schedule maintenance and emergency repairs are accomplished with minimal disruption to production schedule.

·        Ensure that adequate resources are available for meeting scheduled maintenance and repair needs.

·        Review all maintenance schedules and coordinates with other departments to assure optimal equipment and plant availability to meet business needs.

·        Responsible for supervising all grinding mechanical maintenance activities and ensuring that safe work practices are followed. Conduct periodic safety inspections.

·        Ensure compliance with mining, safety, and environmental laws and regulations

Some of your duties will include:

·        Responsible to support Process Operations & Maintenance in ensuring the optimal performance of mineral processing plants. This role focuses on the development, implementation, and maintenance of industrial systems and applications to enhance reliability, efficiency, and productivity across the plant.

·        Support Maintenance Senior Supervisor / Supervisor electrical Upstream and Downstream a team according to plant priorities during occasions of breakdown and emergency repairs.

·        Assist in design of PLC/DCS logic and graphical screen interfaces. Help develop standardized programming and calibration procedures.

·        Develop and maintain a systematic recording system for tracking all PLC/DCS changes.

·        Oversee new equipment installations which interface with a PLC or DCS control system.

·        Ensure the transfer of technology from expatriate to National employees and the promotion and support of National employee training and skill development.

·        Apply Change Management consistently in the workplace

·        Develop monthly plan & weekly schedule in line with forecast

·        Follow up & Implement action items and contingency plans.

·        Ensure that All Crew Members Understand and Follow Standard Task Procedure

·        Ensure that work is completed in a timely fashion to satisfactory Standard

·        Provide Mentoring and Coaching to Subordinates

·        Ensure system in place for periodic review of W/O's, equipment history and costs to identify opportunities for improvement

·        Ensure to comply with out audits and inspections in compliance with Environmental tracker

·        Ensure and maintain all material storage areas to comply with company policies.

Some of your duties will include:

·        Provides Reliability and Maintenance Engineering expertise within the Process Planning & Strategy Department to ensure the continuous improvement of Process Department equipment reliability and infrastructure integrity; Responsible for developing and implementing reliability strategies to optimize the performance and efficiency of the mineral processing plant. The role supports Operations & Maintenance by focusing on predictive and preventative maintenance, failure analysis, and continuous improvement initiatives

·        Reliability Engineering & Analysis

o  Develop and implement reliability and maintenance strategies to improve plant performance.

o  Conduct Root Cause Analysis (RCA) on equipment failures and propose corrective actions.

o  Analyze historical equipment data to identify failure patterns and recommend interventions.

·        Maintenance Planning & Optimization

o  Collaborate with Operations & Maintenance teams to define maintenance schedules for critical assets.

o  Evaluate the effectiveness of preventative maintenance programs and adjust as needed.

o  Provide input on equipment design and modification to enhance reliability and maintainability.

o  Provides engineering drawings/specifications; obtains construction bids; and performs construction management as required;

·     Process Strategy & Support

o  Contribute to strategic initiatives aimed at improving throughput, recovery, and operational efficiency.

o  Support cross-functional teams in developing plans for capacity expansion or operational adjustments.

o  Implement asset management strategies aligned with ISO 55000 standards.

o  Make important equipment and infrastructure reliability recommendations required to support improving machine maintenance and reliability improvements to minimize operating cost and minimize production losses. This is a critical position as mistakes may result in direct production loss;

·        Data Analysis & Reporting

o  Monitor Key Performance Indicators (KPIs) such as Mean Time Between Failures (MTBF) and Mean Time to Repair (MTTR).

o  Prepare and present reports on plant reliability performance to stakeholders.

o  Utilize advanced tools such as CMMS (Computerized Maintenance Management Systems) and reliability software for data-driven decision-making.

o  Performs all functions of RCA, FMECA, and Pareto analysis;

o  Provides data interpretation with recommendations on vibration analysis, oil analysis, wear materials non-destructive testing, gear wear monitoring/failure analysis and equipment failure history analysis.

o  Ensures that all work is properly documented, filed and recorded for future reference;

·        Continuous Improvement

o  Lead continuous improvement initiatives to reduce downtime, increase productivity, and lower operational costs;

o  Champion a culture of reliability excellence within the department;

Some of your duties will include:

·        To supervise staff in the day-to-day activities associated with air conditioning & refrigeration work.

• Reviewing work order, prepare plan, take measurements and have estimate resource requirements and work schedule.
• Ensure the air condition and refrigeration damages have been handled by the technician.
• Arrange the preventive maintenance AC schedule and ensure that it would be done as scheduled.
• Report to the supervisor if any damage needs more taking action.
• Ensure the supply of material coming as plan made
• Active to find a way for efficiency in line with GMP program.
• Maintain tools and equipment in serviceable condition and store them.
• Prepare work inspection and completion reports.
• Maintain a safe and neat work area and report defects, incidents and unsafe conditions.
• Update the STP if required and make some changes needed

·        Responsible for ensuring the job activities in electrical maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

·        Responsible for ensuring the job activities in HV-AC maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

Some of your duties will include:

• Coordinating the civil design, painting and engineering activities with the prime objectives of ensuring construction activities are built as per design and specification, effectively and efficiently to meet project timelines and budget.
• Control the painting works specially for Preventive Maintenance the Existing building and general facilities.
• Ensure all the painting work can be done as company standard and expectation 

·        Responsible for ensuring the job activities in painting maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

Some of your duties will include:

·        To supervise in the day-to-day activities associated with plumbing, piping maintenance included welding;

·        Responsible for all plumbing and piping installations are maintained, repaired, serviced and installed as required to international standards. This includes bit is not limited to Fresh water lines, potable water lines, sewage lines, both inside and outside of facilities and domestic installations

• Understand & enforces work rules, policies & procedure consistently & fairly
• Responsibility maintenance and special project for design plumbing piping system, sewer system, well system fire hydrant system, water treatment system, sewage treatment system at Township, Port site, Concentrator and Mining
• Responsibility maintenance all accessories plumbing and all equipment for housing, barrack, mess hall and all building & public facilities at Townsite, Port site, Concentrator, Mining area;
• Responsibility maintenance fabricates and welding structural, support pipe, tell plate, tubing / cooper carbon steel pipe and galvanize pipe.
• Responsibility joint HDPE pipe, membrane liner HDPE ABS pipe, spigot pipe, mechanical join and votolix joint
• Maintain and administer disciplinary procedure fairly, consistently, correctly, and when necessary per maintenance rules and policies.
• Maintains consistent standard safety, quality, conduct and productivity : responsible for ensuring the quality and safety of all mechanical plumbing systems installed or maintained by the company; Conduct quality control inspections of all mechanical plumbing systems installed or maintained, including HVAC, piping, and water systems; Ensure that all mechanical plumbing systems comply with relevant codes and standards, including local, state, and federal regulations; Work closely with the F&S Dept's maintenance and construction teams to ensure all mechanical plumbing work is completed to the highest quality standards; Maintain accurate and up-to-date records of all inspections, including inspection reports, work orders, and maintenance records; Communicate with contractors and vendors to ensure that all mechanical plumbing work is completed to company standards and on schedule.
• Effectively communicates complete and correct safety interaction to crew; Ensures safety rules and regulation are followed at all times
• Plans for necessary manpower, materials and equipment necessary for work to be performed.
• Organizes and plans work efficiently and completes work within or ahead of schedule with minimal rework.

·        Conduct regular training sessions with employees to ensure they are aware of and comply with mechanical plumbing codes and standards.

·        Responsible for ensuring the job activities in plumbing maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

Some of your duties will include:

·        To supervise staff in the day-to-day activities associated with air conditioning & refrigeration work.

• Reviewing work order, prepare plan, take measurements and have estimate resource requirements and work schedule.
• Ensure the air condition and refrigeration damages have been handled by the technician.
• Arrange the preventive maintenance AC schedule and ensure that it would be done as scheduled.
• Report to the supervisor if any damage needs more taking action.
• Ensure the supply of material coming as plan made
• Active to find a way for efficiency in line with GMP program.
• Maintain tools and equipment in serviceable condition and store them.
• Prepare work inspection and completion reports.
• Maintain a safe and neat work area and report defects, incidents and unsafe conditions.
• Update the STP if required and make some changes needed

·        Responsible for ensuring the job activities in electrical maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

·        Responsible for ensuring the job activities in HV-AC maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

Some of your duties will include:

·        To supervise and direct the activities of company maintenance (electrical - electrician) personnel

·        To ensure that adequate resources are available to meet production and maintenance needs

• Reports all accidents and incidents in the work group to enable management to identify areas for improvement in work practices.
• Communicates work group status to supervisor and interfaces with other departments.
• Supervise employees of the unit/work group to ensure that all jobs are completed to the required standard.
• Plan the daily work schedule and order materials and parts required to enable client needs to be met and resources used efficiently.
• Liaise with and coordinate field and workshop activities with other maintenance supervisor, planners and production personnel to resolve problems and set maintenance priorities.
• Schedules work orders, preventive maintenance, equipment, employee vacations and training.

·        Identify training needs and recommend on the job training or basic training programs to improve work group effectiveness and safety

·        Manage and develop staff including setting objectives, performance management, training & coaching, succession plan, and handling industrial issues

·        Liaise with and coordinate field and workshop activities with other maintenance supervisor, planners and production personnel to resolve problems and set maintenance priorities

·        Responsible for ensuring the job activities in civil maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

·        Responsible for ensuring the job activities in electrical maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;

Some of your duties will include:

·        To plan, coordinate, and supervise civil construction project and maintenance works, to deliver products which meet standard requirement, on time and to budget while satisfying the of the client and company;

·        Responsible to receive work order and provide working schedule then to ensure all Civil works will completed in good result and meet with standard or company regulation.

·        To coordinate all civil job or carpentry & provide working schedule, estimation of materials needed for every work order;

·        Provide report after work order completed

·        Inspect every task and to make sure all done in a good manner

·        Lead, organize and provide directions for employee to ensure outstanding performance HSE&Q outcome and the business results;

·        Responsible for ensuring the job activities in civil maintenance area are meet with quality standard and compliance with the regulation, this includes but is not limited to inspection of corrective maintenance works, general inspection of tool and equipment

·        To coordination with related supervisor in regard for quality assurance according to company standards and company requirement;