Total 116 job vacancies in batam panbil plaza

• Prepare drawing (calculation sheet and hose) for domestic market and Malaysia market
• Prepare and check drawings (fitting, ancillary, others related to product) for domestic market and Malaysia market.
• Prepare document for design and development of hose product (planning, input, output, review, verification, validation)
• Review contract content, prepare inquiry letter for making procedure and prepare making procedure 
• Prepare and check travel card of every MH order
• Prepare travel card package (BOM, actual material cost)
• Prepare drawing list, Inspection Test Plan (ITP) and another document for customer  
• Prepare procedure related to specification, technical and process of the product and make sure in line with actual production
• Investigate the nonconformity (NN) and prepare the corrective action and preventive action to solve a problem
• Research and conduct trial to new part, new material for improvement and cost down, and coordinate with related section 

Wajib memiliki:

-   Surat Keahlian Kerja (SKA) Madya HVAC/Electrical, atau;

-   Sertifikat Keahlian Ahli Teknik SIstem Tata Udara dan Refrigerasi Madya atau;

-   Surat Tanda Registrasi Insiyur (STRI) Insiyur Level Insiyur Profesional Madya

1. MAINTAIN AN ORGANIZED INVENTORY OF FACILITY-RELATED SUPPLIES.

2. MAINTAIN ACCURATE RECORDS OF MAINTENANCE ACTIVITIES, REPAIRS, AND INSPECTIONS.

3. CONDUCT ROUTINE INSPECTIONS AND PREVENTIVE MAINTENANCE ON FACILITY EQUIPMENT, INCLUDING HVAC SYSTEMS, ELECTRICAL SYSTEMS, PLUMBING, AND OTHER MECHANICAL SYSTEMS.

4. PERFORM REPAIRS OR COORDINATE WITH EXTERNAL VENDORS FOR MORE COMPLEX EQUIPMENT ISSUES.

5. MONITOR AND ADDRESS ISSUES RELATED TO THE BUILDING PHYSICAL STRUCTURE, SUCH AS ROOFING, FLOORING.

6. OVERSEE AND MAINTAIN UTILITIES SUCH AS WATER, GAS, AND ELECTRICITY TO ENSURE PROPER FUNCTIONING.

7. RESPOND TO AND ADDRESS ANY DISRUPTIONS OR FAILURES IN UTILITY SERVICES.

8. CONDUCT REGULAR SAFETY INSPECTIONS AND ADDRESS POTENTIAL HAZARDS.

9. RESPOND TO EMERGENCY SITUATIONS, SUCH AS POWER OUTAGES, EQUIPMENT FAILURES, OR OTHER CRITICAL INCIDENTS.

10. COMMUNICATE WITH OTHER DEPARTMENTS OR TEAMS TO UNDERSTAND THEIR FACILITY-RELATED NEEDS.

• Fixed Asset Management (Capitalize, Tagging, Audit, etc)

• Forecasting and monitoring of expenditure

• Prepare and present financial reports

• Respond to financial inquiries by gathering, analyzing, and summarizing data

• Perform other duties as assigned (if any)

Requirements:

• Minimum Degree in Accounting or Finance Management or equivalent

• Minimum 1 year of working experience in the related field, but fresh graduates are welcome to apply

• Fluent in English (oral and written)

• Possess strong analytical, communication, and presentation skill

• Proficient in Ms Office and SAP system will be preferable

- VENDOR SOURCING, NEGOTIATION, COST DOWN 

- MANAGE INCOMING DELIVERIES TO WAREHOUSE 

- LIAISE WITH STAKEHOLDERS FOR ON-TIME RECEIVING AND SYSTEM UPDATING 

- MANAGE OUTGOING SHIPMENTS FROM WAREHOUSE 

- IDENTIFY PROCESS BOTTLENECK TO IMPROVE PRODUCTIVITY, QUALITY AND EFFICIENCY 

- ENSURE THAT INVENTORY RECORDS ARE UPDATED 

- NEW PRODUCT APPROVAL FOR PROCESS SAMPLE/DOCUMENT SUBMISSION 

- KNOWING PRODUCT SPECIFICATION AND PLAN FOR DEVELOPING 

- COMMUNICATE AND WORK CLOSELY WITH PLANNING, QA, AND ENGINEERS ON THE PRODUCTION SCHEDULE, CHANGES, AND REVISIONS FROM CUSTOMERS OR ENGINEERING CHANGES.

TO FOLLOW UP DOCUMENTATION & DATAANALYSIS

1.      Laki-laki, min SMU sederajat

2.      Pengalaman minimal 1 tahun

3.      Diutamakan bagi yang memiliki SIO (Surat Izin Operator)

4.      Dapat mengoperasikan computer

5.      Agresif, disiplin dan mampu berkomunikasi dengan baik

Bekerja sesuai Instruksi Kerja yang telah ditentukan Pemimpin Line

1. Assist Safety Officer in ensuring health and safety practice is implemented

2. Provide assistance and share knowledge/best practice for each department in implementing ISO/EHS policy, especially for high risk processes

3. Support and do monitoring program to achieve zero accident

4. Ensure relevant legal/regulation is fulfilled

5. Maintain ISO/EHS documented information

6. Carry out general administration for ISO & EHS Department

Requirements:

1. Minimum Bachelor's degree in from any major

2. Prior experience in the same role, preferably in the manufacturing company; although, fresh graduates are welcome to apply.

3. Good knowledge of ISO 9001, ISO 14001 & ISO 45001, relevant EHS regulation, 5S, and safety is a must.

4. Smart worker, possess strong analytical skill, good attitude, and responsible person.

5. Proficient in MS. Office and familiar to do a presentation.

6. Good command in English both oral and written.

Manage and lead a team in execution of routine inspections, rectification of general buildings defects and ad-hoc maintenance repairs. ·    

Conduct facilities assessment and suggest recommendations for upgrading works. ·    

Ensure high standard of work and strict adherence to EHS policy ·    

Responsible for the management of facilities, mechanical and electrical services, and non-clinical equipment

Responsible for the management of the constructions of new building and maintenance of existing structures    

Monitor and investigate feedbacks and implement appropriate mitigating measures. ·    

Conduct environmental audit and proactively highlight any potential issues. ·    

Other relevant duties as assigned.

1. Melakukan semua kegiatan administrasi yang ada di produksi
2. bertanggung jawab dalam pendistribusian laporan
3. bertanggung jawab dalam perarsipan file produksi
4. melaksanakan dan menjalankan intruksi yang diberikan oleh atasan
5. menjaga dan memelihara kebersihan area produksi

   Preferably female max. 30 years old

   Pursuing Bachelor’s degree or Diploma (Communication or any other related fields)

   Min. 1 year or relevant working experiences in Marketing Communication field

   Good knowledge in communication & relationship management

   Have a good creative ideas

   Have experience in planning, executing and managing event

   Good organizational, time and project management skills

   Fluent in Bahasa & English, both written and spoken

   Accuracy and attention to detail

Annotation drives AI’s capabilities.

Industries across the board are embracing AI, and the backbone of this revolution is accurate data labeling (data annotation). As an AI Tutor - Expert Annotator, you will not just be performing routine tasks; you are a meticulous specialist ensuring the highest quality of data markup. In this role, you help pave the way for more reliable and responsible AI models by laying the groundwork through precise annotation.

Responsibilities:

• Accurately label and annotate data following comprehensive project guidelines.
• Make justified decisions on ambiguous content by applying critical thinking to preserve the integrity of the dataset. 
• Actively collaborate with team members to discuss and resolve ambiguities, align on best practices, and enhance project outcomes.
• Consistently adhere to established data labeling standards and protocols, ensuring the highest quality and reliability of data.

Our ideal candidate:

• Has great command of English: advanced (C1) / proficiency (C2) / native level.
• Has a keen eye for detail: precision is paramount in data labeling.
• Is a dedicated performer who recognizes the importance of even routine tasks.

• Be part of a significant project for a leading technology company, making a substantial impact on the future of AI.
• Enjoy the flexibility of a part-time, remote role that accommodates your schedule.
• Try your hand at an AI project and enrich your portfolio with new experiences.

• Menjual lisensi produk software seperti Microsoft, Autodesk, dll ke B2B dan B2G
• Mencapai target penjualan atau pendapatan individu

We are seeking a diligent and detail-oriented Location Confirmation Specialist to join our team. In this role, you will be responsible for confirming the location of various buildings in the city center using a smartphone camera and the survey application.

• Collect location attributes according to the survey map.
• Collection of street level images.
• Easily move around selected areas of the city and take pictures with your smartphone

• Smartphone, internet connection
• Computer literacy
• Intermediate+ English

• Flexible schedule
• Ready to take on a student
• Can be combined with main job
• Competitive salary
• Working during daylight hours It is possible to work on convenient transport for yourself: bicycle, scooter.

PT PLN (Perusahaan Listrik Negara) sedang membuka lowongan kerja – kesempatan karir bagi putra-putri bangsa untuk bergabung dan mengembangkan kompetensi bersama kami.

Posisi / Jabatan :

• Manager Servise
• Kepala Produksi
• Staff Administrasi
• Sekretaris
• Supervisior
• Customer Service
• Mesin
• Industri
• Kimia / Teknik Lingkungan
• Manajemen Bisnis / Niaga
• Keuangan
• Akuntasi
• Komunikasi

PERSYARATAN :

1. Warga negara indonesia
2. Pria / Wanita Usia Maksimal 40 Tahun
3. Pendidikan SMA / SMK / D3 / S1
4. Nilai

• Indeks Prestasi Komulatif (IPK) ≥ 2.75
• Ijazah Rta-Rata 6.00

5. Terbuka bagi lulusan baru (fresh graduate) 
6. tidak bertato dan bertindik (pria) 
7. tidak pernah menggunakan / terlibat narkoba
8. tidak pernah di hukum penjara berdasarkan putusan pengadilan yang telah berkekuatan hukum tetap
9. tidak pernah diberhentikan di anak perusahaan atau institusi lainnya dikarenakan hukuman disiplin atau diberhentikan dengan tidak hormat.
10. bersedia ditempatkan di seluruh wilayah kerja PT PLN (persero)

Cara Pendaftaran :

Apabila kamu sudah memenuhi kualifikasi diatas dan berminat bekerja di PT PLN (persero), silahkan apply lamaran kamu melalui tombol “Apply For Job” dibawah.

PT PLN (persero)
Daftar Online : https://s.id/pln-karir

Lain-lain :

1) Pengumuman setiap tahapan seleksi hanya melalui email Peserta Rekrutmen wajib melakukan pengecekan email secara berkala.
2) Tidak ada korespondensi berkaitan dengan rekrutmen ini dan keputusan Tim Penerimaan Pegawai tidak dapat diganggu gugat.
3) Tidak dipungut biaya apapun dalam mengikuti seleksi yang diselenggarakan oleh PT PLN (Persero).
4) PT PLN (Persero) berhak menentukan profesi lainnya di luar profesi yang dilamar tanpa meminta persetujuan peserta terlebih dahulu.

Lowongan kerja terbaru 2024– Pegadaian adalah sebuah BUMN sektor keuangan Indonesia yang bergerak pada tiga lini bisnis perusahaan yaitu pembiayaan, emas dan aneka jasa.

Saat ini PT. Pegadaian (Persero) Tbk sedang membuka beberapa posisi Lowongan

Persyaratan Melamar:

•  Surat lamaran
• Curicullum Vitae
• Kartu Identitas/KTP
• Ijazah sesuai pendidikan terakhir

Jika Berminat Pelamar melakukan Registrasi Online melalui Link

• Untuk Info Lowongan Kerja Silahkan Aplly Link
  https://rekrutmen-pegadaian.kim/

Hasil seleksi merupakan keputusan mutlak PT.Pegadaian (Persero) dan tidak dapat diganggu gugat

Silahkan Daftar Secara Online Via link  APPLY >> https://bit.ly/Bumn_pertamina

As a Manufacturing Engineer supporting the Engineering Team, you will be trusted to work at the Batam Plant. This position is responsible for the improvement of manufacturing efficiency, safety on work environment, product quality, non-conformance investigation, and CAPA.  In this role, a typical day will include:

• Identify improvement projects related to productivity and material efficiency to meet business objectives by utilizing the Lean Six Sigma concept

• Optimize manufacturing process, ensuring efficiency and quality standards are met

• Understand the failure/non-conformance investigation requirements based on International Standards, GMP/QSR US FDA, and ISO Standards

• Responsible for diagnosing problems, performing investigations and developing CAPA on related production issues

• Collaborate with cross-functional teams to troubleshoot issues and streamline processes to improve production productivity, quality, cost, and safety

• Implement Quality Control measures within Manufacturing Processes

• Responsible and accountable to ensure full compliance

• HSE implementation and performance in the Production Department. Provide support in area process responsibility for other HSE activities that are assigned by Management

WHAT YOU’LL BRING TO ALCON:

• Degree in Industrial /Mechanical Engineering or a similar field

• 1 year of experience in the Manufacturing Industry with an understanding of the manufacturing process

• Proficient in communicating in English both verbally and written

• Strong in analytical thinking, data analysis, critical thinking and problem-solving skills

• Experience in working/certified in either Green Belt or Black Belt projects will be an advantage

• Hands-on experience with MS Office and MS Excel, thorough knowledge of various kinds of office software

• Effective communication with coworkers across departments, attention to detail, ability to multitask and mentoring.

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

As a Senior Engineer Facility Utility supporting the Facilities Team, you will be trusted to work at the Batam Plant. In this role, a typical day will include:

• Understand the Project deliverables requirements based on International Standards; GMP/QSR US FDA, and ISO standards

• Deep Understanding of ISO 14644 cleanroom standard for medical device manufacturing

• Perform Coordinating, managing and investigations related to projects which may involve NCR, safety incidents and other investigations as necessary

• Manage all facility & utility activities under project such as URS, budgeting, raise PR/ PO, technical justification, prepare documents related to facility & utilities, vendor supervision, testing, commissioning as needed, end to end project management for facility & utility scopes

• Collaborate with other departments and generate technical documentation related to projects

• Facility-related projects implementation and execution within timelines and budget

• Working in accordance with the HSE Manual and documented procedures, and reporting HSE issues to the respective area owners

• Code of Conduct, HSE Policy and National HSE Standards are Implemented and respected

• Working together with Civil, electrical, utilities and clean room consultant to ensure clean room designed to meet the standard

WHAT YOU’LL BRING TO ALCON:

• Degree in Engineering (Civil, Electrical, Mechanical) or relevant field

• At least 3 years of experience working in a Pharmaceutical or Medical Device company with project transfer experience

• Knowledge of Pharmaceutical / Medical Device documentation standards (User Requirement Specification [URS], Validation Document [experience to write/prepare/ review], Change Request

• Proficient in communicating in English both verbally and written

• Experience on Automation Process Control, Automation Systems Maintenance, Equipment Maintenance, Failure Analysis, Hazards and Risk Control and Policy Management and Troubleshooting (Service and Repair) will be an advantage

• Knowledge in Microsoft Office Word, PowerPoint, Excel, Microsoft Project, AutoCad (Reading Technical drawing), 3D Modelling

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Equipment Engineer Supervisor supporting the Engineering Team, you will be trusted to work at the Batam Plant. In this role, a typical day will include:

• Responsible for providing technical support and continuous improvement in the Equipment Engineering/maintenance and ensuring the successful operation of manufacturing, safety, productivity, validation, and team goals/targets are met while in compliance to company implemented policy (internal/global Alcon quality procedure, HSE, DI, GDP, SOP, and 5S)

• Responsible for all machine PM execution and machine performance. Equipment Engineering, to coordinate with related departments to ensure all of PM can be executed as per the schedule plan with very minimum impact on productivity. Review all of PM procedures and effectiveness and efficiency

• Administer Equipment Engineering

  • Ensure proper on-site installations

  • Take charge of routine servicing teams and repair Teams

  • Assist in planning and tracking all maintenance works

  • Investigate root causes of equipment failures

• Manage Equipment Capabilities

  • Manage equipment monitoring relates to DT trending and performance

  • Implement solutions for equipment capability and monitoring

  • Manage all Preventive Maintenance should be executed as per scheduled plan with minimum impact on productivity and PM effectiveness

  • Adopt new technologies to improve the equipment system

• Confirm to management requirements

  • Enforce good safety /HSE culture and Maintenance practices

  • Maintain quality assurance systems related to equipment

  • Monitor Machines / Equipment performance data to establish good control parameter

  • Conduct technical presentations

• Contribute to Continuous Improvement

  • Lead continuous improvement projects

  • Lead working level community to explore opportunities for improvement project

• Influence Organization Development

  • Provide guidance to other

  • Develop a training program for staff

WHAT YOU’LL BRING TO ALCON:

• Degree in Engineering or relevant field

• At least 2 years of experience working in semi / full automated industrial environment as an Engineer

• Proficient in communicating in English both verbally and written

• Experience on Automation Process Control, Automation Systems Maintenance, Equipment Maintenance, Failure Analysis, Hazards and Risk Control and Policy Management and Troubleshooting (Service and Repair)

• Experience in working with the contractor and external vendor will be an advantage

• Knowledge in Microsoft office Word, Power Point, Excel, Basic Minitab, Data Trending.

Alcon Careers

See your impact at alcon.com/careers

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

1. Prepare project budget and product costing in support of project feasibility study.

2. Manage and control project expenditure from PR quotations to payment schedule and track forecast vs actual.

3. Assist in the planning of projects by preparing project schedules.

4. Assist in the providing project updates and maintaining meeting minutes/agenda.

5. Manage and control project resources and track forecast vs actual.

6. Manage site project list and priority.

7.General support to project teams and PMO department.

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

Moladin adalah platform fintech untuk mobilitas terkemuka di Indonesia dengan solusi pembiayaan end to end untuk semua pemain di ekosistem mobil bekas dan kendaraan listrik (EV). Moladin memberdayakan lebih dari 26.000 agen dan UMKM dealer mobil bekas dalam network yang berkembang pesat, dan memberikan akses pembiayaan yang lebih baik kepada konsumen mobil bekas melalui penjaminan pinjaman yang berbasis digital. Hal ini didukung oleh keahlian Moladin dalam operasional mobil bekas yang kuat dengan cabang dan warehouse di lebih dari 100 kota; AI/IoT yang terdepan di industri, dan kemitraan dengan seluruh perusahaan pembiayaan mobil terkemuka di seluruh Indonesia. Serta dukungan dari PT Moladin Finance Indonesia yang berizin dan diawasi oleh Otoritas Jasa Keuangan (OJK). Visi Moladin adalah menjadi katalis perubahan positif dalam mobilitas fisik dan sosial semua orang yang terlibat di dalamnya (“Mobilitas untuk semua”). Untuk informasi lebih lanjut terkait Moladin kunjungi kami di https://moladin.com

Responsibilities

• Memimpin operational dan sales team untuk mencapai target penjualan dan profitabilitas.
• Mengembangkan strategi yang berkelanjutan untuk car refinancing business dengan merekrut jaringan agen dan membuka channel akuisisi baru.
• Memastikan pertumbuhan portofolio dan menjaga kualitas kredit keseluruhan portofolio di cabang.

• Pendidikan minimal D3 terbuka untuk semua jurusan.

• Memiliki pengalaman minimal 5 tahun sebagai Marketing Head atau 3 tahun sebagai Branch Manager di bidang car financing atau refinancing di industri multifinance.
• Memahami mengenai auto loan business dengan penekanan khusus pada car refinancing business.
• Memiliki jaringan yang kuat dalam car financing dan refinancing di area yang ditentukan.
• Terampil dalam memimpin dan mampu bekerja secara kolaboratif dengan tim.
• Memiliki kemampuan komunikasi dan interpersonal yang baik, kemampuan pemecahan masalah serta analisis yang kuat.
• Terbiasa bekerja dengan target serta memiliki kemampuan dalam negosiasi.

Notes

- Batas waktu pendaftaran lowongan berakhir pada hari Minggu, 25 Februari 2024.

- Langkah berikutnya setelah apply adalah pengisian formulir seleksi yang akan dikirimkan melalui email. Pastikan untuk memeriksa email Anda secara berkala.

Job Title

Job Description

Job title:
Is responsible for the development and improvement of processes, tools and equipment of the manufacturing systems, leading to predictable, reliable, stable and efficient production processes.

Your role:

• All technical aspects of industrialization activities, managing/monitoring the process capabilities of part manufacturing with secondary processes and/or product assembly.

• Work closely with cross function team of I&D, Equipment and Quality to fulfill new product requirements and come up with technical proposals towards I & D to keep manufacturing and the process robust.

• Responsible for all industrialization deliverables related to the technical aspects in the PDLM projects (process requirements, verification and validation, capability studies, work instructions, control plans, cycle time and manpower studies etc.). This includes launch and subsequent maintenance of the project.

• Plays pro-active and creative role in project team and lead technical discussions throughout the project (Design for manufacturing, assembly (manual and automated), testing).

• Identify bottlenecks/risks and initiating corrective actions by working closely with relevant functions to keep the product design simple for manufacturing and manufacturing under control with high OEE and low FOR.

• Proper handover to Operations/Production after achieving consistent results over a certain period of time.

• Troubleshooting on issues which happen during production.

You're the right fit if:

• Have experience working in Manufacturing Environment/Production Line.

• Familiar with 3D Data software (Solidworks/Unigraphics) and 2D drawings.

• Understand in Mechatronics and Automation system.

• Familiar with Engineering activities (DFM, DFA, Engineering Trial, DOE, GRnR) and Reports (PFD, PFMEA, Process Release Report, Work Instruction).

• Familiar with Problem Solving Tools/Root Cause Analysis (3C, DMAIC, Fishbone diagram, tree diagram, etc.).

• Understand Six Sigma and Statistical tool used in manufacturing (Cp-Cpk, SPC, etc).

• Good communication in English.

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

Job Title

Job Description

Job title:
Is responsible for the development and improvement of processes, tools and equipment of the manufacturing systems, leading to predictable, reliable, stable and efficient production processes.

Your role:

• All technical aspects of industrialization activities, managing/monitoring the process capabilities of part manufacturing with secondary processes and/or product assembly.

• Work closely with cross function team of I&D, Equipment and Quality to fulfill new product requirements and come up with technical proposals towards I & D to keep manufacturing and the process robust.

• Responsible for all industrialization deliverables related to the technical aspects in the PDLM projects (process requirements, verification and validation, capability studies, work instructions, control plans, cycle time and manpower studies etc.). This includes launch and subsequent maintenance of the project.

• Plays pro-active and creative role in project team and lead technical discussions throughout the project (Design for manufacturing, assembly (manual and automated), testing).

• Identify bottlenecks/risks and initiating corrective actions by working closely with relevant functions to keep the product design simple for manufacturing and manufacturing under control with high OEE and low FOR.

• Proper handover to Operations/Production after achieving consistent results over a certain period of time.

• Troubleshooting on issues which happen during production.

You're the right fit if:

• Have experience working in Manufacturing Environment/Production Line.

• Familiar with 3D Data software (Solidworks/Unigraphics) and 2D drawings.

• Understand in Mechatronics and Automation system.

• Familiar with Engineering activities (DFM, DFA, Engineering Trial, DOE, GRnR) and Reports (PFD, PFMEA, Process Release Report, Work Instruction).

• Familiar with Problem Solving Tools/Root Cause Analysis (3C, DMAIC, Fishbone diagram, tree diagram, etc.).

• Understand Six Sigma and Statistical tool used in manufacturing .(Cp-Cpk, SPC, etc.).

• Good communication in English.

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.