• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Familiar with the International code and standard such as IEC, IEEE, ANSI, NEC, NEMA

• Well known electrical basic philosophy in design (Construction design)

• Familiar with Electrical design drawing software such as 2D Auto Cad, 3D model (SP3D, PDS, PDMS)

• Familiar to use general Microsoft Word & office

• Strong mind with schedule and design quality

Responsibilities:

• Ensure, record, and retain day-to-day administration and accountable operation of the safety management system at station level.
• Control the provision of services provided by third parties and to reconcile invoice prior submitted to finance department.
• Plan, manage, and control the efficient operation of passenger, baggage, ramp, and cargo handling activities at all airports in Indonesia.
• Plan, build and maintain good relations with airport stakeholders and related parties.
• Ensure airside safety, security management, and FOD policy implementation.
• Ensure station operations comply with company, airport, and government requirements.
• Ensure operational compliance with safety, security, and quality standards.
• Ensure all operational staff and contracted ground handling agents work in a safe and comfortable environment.
• Maintain professional, clean, and safe station facilities.
• Implement and maintain safety and security procedures and programs.
• Plan and develop personnel under responsibility.
• Promote a culture of fairness and open reporting of incidents and occurrences.
• Communicate any information jeopardizing safety and security through appropriate channels.

Responsibilities:

• Ensure compliance with relevant regulations, including GDPR, HIPAA, SOX, and industry-specific standards.
• Develop, implement, and monitor IT compliance policies and procedures.
• Conduct regular internal audits of IT systems, processes, and data security measures.
• Work closely with the IT and legal teams to identify and mitigate IT compliance risks.
• Coordinate with various stakeholders to integrate governance practices into IT operations.
• Monitor compliance with internal policies and external regulations.
• Strong project management skills, including planning, execution, monitoring, and completion.
• Strong analytical and problem-solving skills to identify and resolve complex issues.
• Deep understanding of networking protocols, including TCP/IP, DNS, DHCP, VPN, VLAN, etc.

PT. Binayasa Putrabatara merupakan perusahaan yang bergerak dibidang building management, jasa konstruksi dan pengadaan property membutuhkan Teknisi Maintenance Gedung

Tanggung Jawab Pekerjaan :

Melakukan kegiatan perbaikan dan pemeliharaan mekanikal elektrikal, sipil, plumbing dan AC gedung

Melaksanakan pekerjaan sesuai standart yang sudah ditetapkan

Maintenance aset fisik gedung

Keahlian :

Memahami sistem kelistrikan, mekanikal, dan plumbing yang ada di gedung.

Mampu melakukan perbaikan pada peralatan dan sistem gedung, seperti AC, pemanas, dan sistem ventilasi.

Kualifikasi :

– Kandidat harus memiliki setidaknya SMA/SMK di Teknik (Elektro), Teknik (Lainnya), Teknik (Mekanikal), Teknik Sipil atau setara.

– Setidaknya memiliki 1 tahun pengalaman dalam bidang yang sesuai untuk posisi ini.

– Lebih disukai Pegawai (non-manajemen, non-supervisor) khusus dalam Teknik – Lain-lain atau setara.

– Bersedia ditempatkan diseluruh wilayah Indonesia (Jabodetabek)

• Experience in using Revit Software is preferable
• Experience in using AutoCAD

Kami PT. Kangaroo Motor Mandiri adalah dealer resmi Suzuki Mobil Wilayah Bengkulu sedang mencari Mekanik Senior mobil roda 4 dengan Area kerja Wilayah Kota Bengkulu dengan kriteria Sebagai Berikut :

• Pria Max umur 45 Tahun
• Berpengalaman Minimal 5 tahun
• Mempunyai SIM dan kendaraan Pribadi
• bisa bekerja sama dengan team

Benefit Uang Operational Gaji Pokok BPJS dan Tunjangan Lain nya Jenjang Karir

• Experience in preparing steel structure drawing in EPC Project
• Capable to provide 3D Model using SP3D, AP3D and Tekla
• Experience in using AutoCAD

• Experience in preparing Drainage Drawing and details and/or foundation drawing in EPC Project.
• Capable to provide 3D Model using SP3D and AP3D.
• Experience in using AutoCAD.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Responsibilities:

-       Able to handle full set report in accounting (AP, AR, Bank, GL, Inventory)

-       Understand Indonesia taxes regulation (Income Tax)

-       Able to operate tax system e-spt is a plus

-       Able  to prepare cash flow and cash forecast

-       Understand Bank Indonesia reports

-       Having high anthusiasm for learning

-       Able to work in team

• Experience 5 years in EPC Project as Building Mechanical, Electrical, Plumbing (MEP) Designer/Drafter.
• Experience in using Revit Software is preferable.
• Experience in using AutoCAD.

ABOUT YOUR ROLE : 

You will be responsible for Account Payable and Taxation. You will be based in Cikarang. This is a 5 months contractual role. 

YOUR RESPONSIBILITIES WILL INCLUDE:

• Prepare VAT invoices and key in VAT 
• Prepare reconciliation of tax accounts, tax payment and tax reporting
• Prepare Withholding certificates and send to Vendors
• Input, Journal daily transactions and checking the completeness of supporting documents
• Communicate with users, vendors and SSO team
• Prepare Payments
• Administration work and filling
• Support on audit

Qualification :

• Having experience minimum 3 years in Data Support & Inventory Control
• Prior experience in retail would be advantageous.
• Familiar with retail system / POS system
• Fast typing skills
• Have a good experience with spreadsheets (MS Office Word, Excel, etc.)
• Basic understanding of databases.
• Basic math skills.
• The ability to document accurately.
• Good command of English both oral and written.
• Great interpersonal and communication skills.
• Great attention to detail.
• Good time-management skills.
• Sense of ownership and pride in your performance and its impact on the company’s success.
• Team-working skills.
• Min. diploma or bachelor's degree or equivalent
• Placement Badung-Bali

Job Description:

• To find good resource of vendors when needed.
• Purchase new or additional stock, or prepare documents that provide for such purchases.
• Compile, review, and maintain data from purchase orders, requisitions, and other documents in order to assess supply needs.
• Ensure stock availability
• Manage cycle counts/ stocktake of product inventories on a regular basis
• Verify inventory computations by comparing them to physical counts of stock, and investigate discrepancies or adjust errors.
• Preparing reports for the management stating trends, patterns, and predictions using relevant data

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable to understand piping standard drawing
• Capable to understand piping layout
• Capable to operate 2D CAD / 3D Model
• 3D Modeling tools experience (S3D, AP3D), SPR & Navis operation.
• Middle experience knowledge and expertise in Piping Design-layout, 3D modeling, P-Info dwg, isometric, piping plan drawing, MTO sketch

• Mengoperasikan mesin printing sesuai rencana kerja harian.
• Melakukan pencampuran warna berdasarkan formula yang telah ditetapkan.
• Memastikan kualitas hasil produksi sesuai dengan standar QC yang berlaku.
• Mengimplementasikan warna pada material dengan akurat.
• Melakukan pencocokan warna secara visual berdasarkan ArtWork dan permintaan pelanggan.

- Provide technical support to end-users for hardware, software, and network issues.

- Diagnose and resolve technical problems both on-site and remotely.

- Maintain and update system documentation and hardware inventory.

- Install, configure, and troubleshoot operating systems and software applications.

- Manage user accounts, permissions, and access control.

- Provide technical support and troubleshooting for business applications

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.