The Assistant Driller is a first line supervisor whose main duties are to direct and instruct the crew in the proper way to perform their duties and assigned tasks. This position is responsible for all operations pertaining to the drilling and completion of the well, including the circulating, rotating, hoisting, well control systems. It is the Assistant Driller’s responsibility to ensure that the work is performed safely, efficiently and according to procedure. The Assistant driller also takes total ownership of everything on the drilling location.

Essential Functions:

• Provide visible leadership with Total Ownership attitude. Owns safety standards.
• Supervise and ensure the safety of drilling crew as well as efficient operations during tour of duty. Assisting Driller with daily responsibilities and routinely communiticating with driller and client.
• Enforce, clarify, and follow Company policies, standards, and procedures.
• Follow the client’s daily drilling plans.
• Promote operational excellence through procedural discipline.
• Ensure crews achieve Company and client competency standards.
• Train and supervise crew members on standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping.
• Delegate work effectively with a clear definition of requirements and expectations.
• Responsible for morale and order within crew.
• Ensure Authorized To Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure timely completion of accurate reports required by Company and client (including but not limited to daily drilling reports, pre-tour reports, hand-over notes, etc.).
• Update the well control board on a tourly basis.
• Maintain complete records of all tools and tubular run into the hole while drilling and/or reaming (including made up lengths, tool joints OD, ID, serial numbers).
• Track rotating hours on tubular/BHA/Tools.
• Maintain records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered and time required.
• Monitor drilling parameters and alarm systems.
• Monitor hole fill operations while tripping, logging, cutting drilling line or running casing.
• Record pickup, slack-off, rotating weights, and other drilling parameters.
• Operate drilling equipment.
• Maintain and adjust machinery in order to ensure proper and safe performance.
• Ensure floor and crown savers are function-tested and that testing results are recorded tourly.
• Ensure proper alignment of choke manifold and BOP remote console.
• Ensure performance of daily checks on FOSV, Kelly cock valve, IBOP, BPV.
• Secure well during well control events emergencies and drills.
• Install and record pressure testing of BOPE.
• Ensure rig equipment and locations are secured prior to rig moves.
• Comply with emergency response plan or Work Safe Procedures during emergencies and/or drills.
• Clean the mast and substructure with a high-pressure steam cleaning unit and/or high pressure wash gun.
• Performs scrubbing and cleaning of rig equipment and drilling packages as required with rig wash.
• Performs chipping and painting on drilling packages and equipment as required.
• Perform additional duties, responsibilities, and special projects as may be directed.

The Maintenance Supervisor is responsible to ensure that all maintenance and repairs of equipment are performed in a safe and efficient manner. The position is responsible for all drilling equipment pertaining to the drilling of the well. The position supervises onsite maintenance personnel to ensure that proper planning and scheduling of pre-determined maintenance is completed accordingly, including the availability of required parts.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude.
• Enforce, clarify, and follow Company policies, standards, and procedures while promoting operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations while ensuring the safety of those working under direct supervision.
• Coordinates with Rig Superintendent and Preventative Maintenance Coordinator on the maintenance, repair and refurbishment of equipment.
• Create applicable maintenance procedures that promote defect-free maintenance work quality.
• Responsible for reviewing, evaluating and maintaining maintenance schedules for equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Enters maintenance and repair data into a Maintenance management system (MMS)
• Provide onsite assistance and guidance to maintenance personnel with trouble shooting issues and repair.
• Monitor oil sample results and ensure recommendations are implemented onsite and reported accordingly.
• Track non-destructive testing and major maintenance to be performed at pre-determined intervals.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the company.
• Collaborate with maintenance team to schedule staffing and resources for the most effective productivity and timely completion of maintenance. Provide technical support for maintenance systems questions and problems.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all maintenance processes, procedures, and policies.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency is applied and followed
• Understand LO/TO and Permit to Work procedures.
• Maintain and update asset tags for onsite equipment.
• Maintain an adequate amount of spare parts are on hand at all times.
• Read and analyze electrical/mechanical drawings, schematics and equipment manuals.
• Perform annual assessments to evaluate performance, skills, qualifications and abilities of maintenance personnel.
• Perform additional duties, responsibilities, and special projects as may be directed.

This position is responsible for wide range of welding jobs such as Carbide Dressing, Hard Banding, Hard facing, Saw welding and general fabrication works.

Essential Functions:

• Perform all work safely and in accordance with the Company's HSE policies and procedures.
• Set-up/run RT & UT Quality Vessel Weld Processes – 3 (GMAW, FCAW, GTAW).
• Set-up/run RT Quality Pipe Weld – All Positions (6G).
• Set-up/run UT Quality Nozzle Welds – All positions (6G).
• Set-up/run Carbon Arc Gouging.
• Able to make any UT or RT Weld Repair.
• Clean and stamp all welds.
• Set-up/run all structural non-code welds.
• Know how to run all welding equipment.
• Ability to read drawings, WPS’s/PQR’s.
• Ability to lead others and plan ahead – Good.
• Knowledge of PT, MT, UT, RT methods.
• Ability to make correct decisions – Good.
• Speed of accomplishing tasks – Fast. - Ability to work safely – Best.
• Average Percent of weld repairs - <0.5%.

This position is responsible for organizing and managing the equipment, materials and supplies in the warehouse.

Essential Functions:

• Accurately maintain records on all equipment, materials supplies and spare parts in the warehouse.
• Systematically label incoming warehouse items and store appropriately in bins, boxes or containers.
• Work closely with Toolpusher, Mechanic and Electrician to ensure that adequate quantities of spare parts are readily available and that they are ordered, received and issued properly, according to the Company’s internal control procedures.
• As needed, will issue warehouse items and track returned items.
• Prepare Material Requisitions, obtain appropriate approval and forward requisition to Division Office for final approval and ordering.
• Prepare Material Receipts and Material Transfers and forward to Division Administrative Manager to ensure all items are properly accounted for.
• Take physical warehouse inventory annually and send report to Division Administrative Manager for reconciliation against accounting records.
• As appropriate, train staff in proper warehouse duties and procedures.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

1. Mampu menyusun dan mengatur data
2. Pandai mengaplikasikan Ms.Office ,Ms.Excel ,Ms.Word dsb,
3. Pandai memperbaharui basis data produk
4. Mampu mengumpulkan data-data informasi dari berbagai sumber
5. Mampu bekerja dibawah team

• Mengembangkan dan melaksanakan rencana kerja yang selaras dengan strategi manajemen.
• Merencanakan, mengatur, dan mengendalikan aktivitas departemen utility untuk memelihara dan meningkatkan efisiensi dan efektivitas kerja.
• Mengembangkan dan meningkatkan sistem utility secara terus-menerus.
• Mengontrol Pengolahan air limbah (WWT),Ketel Uap/boiler,kompresor udara dan sistem kelistrikan
• Mengurus perijinan dengan KLHK dan lembaga terkait lainnya.
• Memastikan semua praktik dan kondisi kerja mematuhi standar keselamatan kerja.

• Mengatur dan melakukan penjualan secara langsung secara offline(ke lapangan) dan online
• Menawarkan kepada klien tentang layanan dan penawaran perusahaan
• Menjaga hubungan dengan klien dengan memberikan dukungan dan informasi
• Menyarankan peluang baru dan solusi
• Memberikan tanggapan yang cepat terhadap pertanyaan atau penyelesaian keluhan klien
• Mencapai target penjualan
• Mengelola catatan aktivitas penjualan dan menyusun laporan penjualan
• Membantu membangun jaringan penjualan yang kuat untuk mencapai target perusahaan
• Bertanggung jawab untuk pengembangan, memperbesar dan menjaga jaringan penjualan
• Membantu dalam memberikan layanan dan mempertahankan pelanggan untuk kembali membeli jasa training
• Presentasi produk dengan detail kepada client
• Mengelola dan memprioritaskan beberapa penjualan, prospek, dan proyek secara strategis
• Menjaga hubungan baik dengan partner perusahaan

1.   Memberikan dukungan teknis kepada pengguna internal

2.   Melakukan instalasi, konfigurasi, dan pemeliharaan hardware dan software serta aplikasi internal

3.   Memonitor kinerja jaringan dan sistem, serta merespon insiden keamanan dan gangguan

4.   Mengelola sistem komputer dan keamanan data

5.   Kontrol cctv sistem

6.   Maintenance server

• Mengelola dan mengatur pengarsipan data perusahaan
• Memelihara dan memperbaharui database perusahaan
• Menyiapkan dan menyunting dokumen dan laporan
• Menyelesaikan pekerjaan dengan tepat waktu
• Mengelola stok persediaan barang dan melakukan pemesanan

PT. MEGA CENTER OFFICIIAL, Membuka lowongan pekerjaan pekerjaan yang di rekrut sebagai adminitrasi pemasaran dan penjualan secara online untuk kamu yang para freelance/WFH. Di sini kita belerja secara online yang bekerja sama dengan merk dan brand yang di tentukan oleh pihak perusahaan yang akan menjadi donatur di PT. MEGA CENTER OFFICIAL.

1. Bisa mengaplikasikan Ms.Office, Ms. Excel, Ms. Word, dan sebagainya
2. Bisa menyalin data-data penting
3. Bisa mengatur dan menyusun data-data
4. Mampu memperbaharui informasi ke dalam format yang sesuai dengan kebutuhan organisasi atau proyek tertentu
5. Mengiput data-data penting

Production Management

• Responsible for Production results.  Drive execution of site improvement plans, help set production improvement goals, ensure priorities and accountabilities are clear, provide resources and remove obstacles to ensure success.
• Analyze and draw information for long-term strategic change and improvement for multiple teams/shifts.
• Lead significant projects & improvement initiatives, scheduling and planning, budgeting and control on assigned production lines.  
• Design and implement production improvement strategies for safety, cost, quality, training, inventory and services.
• Oversee the practice of all health and safety procedures, ensuring that safety is employees’ top priority and lead a safe operation of the business unit and comply with legal, legislative and corporate safety requirements.
• Ensure that manufacturing team members meet site goals and objectives in the establishment of sites’ annual production plans
• Plans, directs and coordinates the ordering and distribution of products, parts, and accessories. Ensures adequate and timely distribution of these elements to attain maximum sales potential consistent with good inventory control.
• Ensure tracking and use of key performance indicators to promote improved operational and business results.

Employee Development & Management

• Train and provide development opportunities for staff and ensure annual goals are complete and communicated (Global Performance Management System is updated & provides regular feedback). Act as a team role model and change-agent.
• Model and promote the Corporation’s Code of Business Ethics and Values.
• Perform general management duties, exercising usual authority concerning staff, performance appraisals, promotions and terminations. Responsible for estimating personnel needs, assigning work, meeting completion, interpreting and ensuring consistent application of company policies.
• Positively lead and influence team members to partner together to achieve individual and business goals.

Maintenance Focus

• Ensures maximum efficient production of facilities and equipment, as well as the care of all grounds and support equipment, through the direction of a technical support staff made up of supervisors, technicians, custodians, and the purchase of necessary outside technical and non-technical support services. 
• Plans, coordinates, and supervises machine and/or building maintenance schedules and activities.
• Coordinates all ordering of parts and services that will maintain or improve the machine/facility cost effectively.

PT OCS Global Service Indonesia membutuhkan tehnisi untuk penempatan di Kuta Bali dengan kualifikasi sebagai berikut :

1. Pria minimum usia 23 tahun
2. Pendidikan minimum SMK Teknik elektro
3. Memahami dan mampu melakukan pekerjaan mekanikal, elektrikal dan sipil
4. Mampu menggunakan alat ukur AVOmeter dan MEGGER
5. Mampu membaca dan memahami diagram wiring motor listrik dan Star Delta
6. Bersedia untuk bergabung secepatnya

1. Teliti
2. Mampu bekerja secara team
3. Mampu bekerja dibawah tekanan
4. Mampu berbahasa dengan sopan dan santun
5. Mampu mengidentifikasi target audiens

We are accepting internship for International Students in these departments:

1. Front Office

2. Quality

3. Food & Beverage

KUALIFIKASI :

1. Usia maksimal 35 th, Pend. Minimal SMA
2. Fresh graduate dipersilahkan
3. Disiplin, rajin & jujur
4. Bertanggung jawab
5. Menguasai ms.office
6. Mampu berkomunikasi dengan baik dan bekerja dalam tim.
7. Mampu bekerja dibawah tekanan
8. Memiliki pengalaman dibidang administrasi lebih di prioritaskan

Jobdesk :

-Melakukan penagihan melalui media telpon, WhatsApp, dan email sesuai data penugasan yg ada pada aplikasi penagihan

-Menyelesaikan proses penagihan sampai selesai

-Mencapai target amount collect sesuai dg target masing-masing aplikasi

-Melakukan follow up kepada nasabah

1. Capai pertumbuhan dan capai target penjualan dengan mengelola tim penjualan dengan sukses
2. Rancang dan terapkan rencana bisnis strategis yang memperluas basis pelanggan perusahaan dan memastikan keberadaannya yang kuat 
3. Penetapan tujuan sendiri, pembinaan dan pemantauan kinerja perwakilan penjualan
4. Bangun dan promosikan hubungan pelanggan yang kuat dan tahan lama dengan bermitra dengan pelanggan dan memahami kebutuhan pelanggan
5. Mempresentasikan laporan penjualan, pendapatan dan pengeluaran serta prakiraan realistis kepada tim manajemen
6. Identifikasi pasar, berkembang dan pergeseran pasar sambil sepenuhnya menyadari produk baru dan status persaingan

STAFF ENGINEERING

STAFF ADMINISTRASI

STAFF ENGINEERING

Bekerja sesuai Instruksi Kerja yang telah ditentukan Pemimpin Line

• Receiving order from customer
• Process the order from customer though manual/VIPS/SIPS/TRIM/D2Comm
• Confirm delivery schedule to customer
• Monitoring order status on production
• Arrange delivery/shipment
• Update delivery/shipment status to customer
• Process any complain from customer relating the order process

• Monitor  and co - ordinates on materials shortages, expediting and ensuring availability to support production plan
• Maintain and improve system, process and workflow to maximize accurate inventory records
• Check and ensure completeness and consistence of purchase orders, contracts and shipping list for the entire for the inventory process
• Track order and investigate problems
• Ensure the whole supply chain is in order so as to smoothen the operation

Primary Responsibilities:

• Establish and maintain seamless co-ordination & co-operation with all departments  to ensure maximum cooperation, productivity, morale and guest service.
• Provide effective support to the team to enable them to deliver effective and efficient services.
• Respond to customer queries by resolving issues in a timely and efficient manner to ensure customer satisfaction.
• Motivate and develop staff to ensure smooth functioning of the department.

• Ensure that the team is trained for all safety provisions.
• Ensure optimal, cost effective use of the resources and educate the team on the same.
• Check and ensure that the temperature of cold stores, public areas etc. are maintained as per the specifications.
• Check and ensure the working condition of fire detectors, fire fighting systems, transformers, electrical systems, etc.
• Coordinate with other departments for regular servicing and testing of equipment.
• Check and ensure that proper safety measures have been adhered to and also ensure maintenance of all fire fighting equipment.
• Ensure that all the first aid kits are available for use in their proper places.
• To supervise the operations of Air-conditioning plant, boilers, pumps etc.
• Ensure that desired level of water is maintained in water storage tanks.
• Ensure correct maintenance of all equipment in conjunction with the other user departments & stay abreast of technological advances in surveillance & safety equipment.