• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

ABOUT YOUR ROLE:

You will be responsible  for order processing, order follow up, product inquiries, on-time deliveries to help elevate customer satisfaction. This is a CONTRACTUAL role for 6 months.

YOUR RESPONSIBILITIES WILL INCLUDE:

• Responsible for order processing to ensure all purchase orders are being executed promptly, customer-required delivery date/times are being met at all times.
• Sales order credit hold check, cash in advance - payment check.
• Daily email backlogs updates to customers.
• Bi-weekly indent orders updates to customers.
• Be able to provide product and quality information and excellent response to customers.
• Coordinate clearing aging inventory and slow-move inventory.
• CS support administrative tasks when needed, CS back up

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Batam

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Kantor Cabang Syariah Medan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

PT. Binayasa Putrabatara adalah perusahaan yang bergerak di bidang manajemen gedung, jasa konstruksi, dan pengadaan properti. Kami berkomitmen untuk memberikan layanan berkualitas tinggi dalam pemeliharaan dan pengelolaan properti, dengan fokus pada standar operasional yang profesional dan efisien.

Tanggung Jawab Pekerjaan :

– Melakukan perbaikan dan pemeliharaan sistem mekanikal, elektrikal, sipil, plumbing, serta AC di gedung.

– Menjaga dan merawat aset fisik gedung agar tetap berfungsi dengan baik dan sesuai standar keselamatan.

– Penempatan di Unit Cabang Balikpapan

Keahlian :

– Mampu melaksanakan tugas sesuai dengan standar operasional prosedur yang telah ditetapkan oleh perusahaan.

– Memahami teknik dasar mekanikal, elektrikal, plumbing, serta pemeliharaan infrastruktur gedung lainnya.

• Melakukan briefing bersama supervisor dan kepada bawahannya.
• Mengalokasikan tenaga mekanik yang dibutuhkan pada shift yang bersangkutan, termasuk untuk penugasan lembur.
• Melakukan inspeksi mesin yang beroperasi di bagian produksi dan melakukan tindakan yang sesuai jika dibutuhkan.
• Mengkomunikasikan kerusakan mesin kepada supervisor produksi yang bertugas untuk rencana perbaikannya.
• Melakukan troubleshooting:
• Menganalisa penyebab kerusakan pada mesin.
• Melakukan perbaikan pada mesin jika terjadi breakdown.
• Aktif menindaklanjuti hasil temuan dari program audit, seperti Red Tag, GMP, EHS, TPM, dan dari aplikasi shopfloor audit.
• Melakukan perawatan dan perbaikan:
• Membawa sparepart yang rusak atau membutuhkan perawatan ke workshop untuk diperbaiki.
• Memperbaiki varian-varian spareparts yang rusak.
• Melakukan aktivitas Preventive Maintenance mesin-mesin SPAMI sesuai dengan jadwal yang telah ditetapkan.
• Membuat catatan aktifitas harian mekanik.
• Membuat laporan Preventive Maintenance dan melakukan “Technical Completion” (TECO) untuk Work Order Number (WO) PM di SAP untuk aktifitas PM yang sudah selesai dikerjakan.
• Ikut serta dalam pembuatan perencanaan perawatan mesin (inspeksi, pergantian spareparts, service dan maintenance).
• Memberikan pengarahan dan pembinaan kepada bawahan jika diperlukan.
• Memelihara dan merawat peralatan kerja.
• Bertanggungjawab terhadap aktifitas troubleshooting.
• Bertanggungjawab terhadap aktifitas maintenance-repair.
• Bertanggungjawab terhadap aktifitas Preventive-Maintenance.
• Bertanggungjawab atas pengalokasian tenaga mekanik yang dibutuhkan.
• Menentukan dan memutuskan perbaikan mesin, beserta penggantian sparepart yang rusak untuk menghindari breakdown yang tinggi.
• Mengalokasi tenaga mekanik yang dibutuhkan untuk menghindari situasi kerja yang tidak maksimal.

Pembuatan dan Kontrol Dokumen

This position is responsible for planning, organizing, scheduling and managing daily maintenance operations and activities in assigned area.

Essential Functions:

• In coordination with Rig Manager and Maintenance personnel, arrange for availability of equipment planned maintenance.
• Directly involved in planning, developing and implementing modifications, capital repairs and improvements, recommending specifications and managing schedules for maintenance and maintenance contracts.
• Interact professionally and maintain effective working relationships with the management team to effectively meet departmental objectives.
• Coordinate activities with other rigs, programs and departments, including scheduling, coordinating and inspecting work performed by contractors.
• Respond to emergencies as requested and coordinate activities to utilize resources to affect repairs in the most expedient and cost effective manner.
• Monitor and report proper completion of al required data input including actual labor hours, comments, parts and supplies used in completing the Work Order.
• Assure conformance to all requirements of the Maintenance Management System including proper and timely completion of all work orders, unscheduled maintenance reports, failure analysis, root cause analysis and preventive measures.
• Participate in selecting third party facilities and repair services from approved vendor list as required in the region, based on Company requirements and regulatory standards.
• Write applicable maintenance procedures that promote defect-free maintenance work quality.
• Able and competent in root cause failure analysis leadership and investigations.
• Apply good stores management practices and parts management to ensure parts and equipment retain full reliability while stored.
• Schedule maintenance work into operations plan.
• Continually improving planning, scheduling, purchasing, stores, data management and job reporting systems to increase planning effectiveness and efficiency.
• Collaborate with maintenance supervision to schedule manpower and resources for the most effective production and maintenance outcomes.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the Company.
• Ensure key performance indicators are captured and reported for equipment reliability, maintenance department performance and planning and scheduling business flow process.
• Ensure that proper safety practices are followed in accordance with state and/or federal regulations and the Company’s HSE program.
• Abide by all Company policies and procedures.
• Other duties and special projects as assigned.
• Ensure that personal behaviors and work practices are in line with Company safety standards.
• Responsible for safety of self and others in the vicinity to include, but not limited to, employees, vendors and guests.
• Provide visible leadership engagement, be aware of housekeeping and take additional safety precautions to ensure no one is put at risk.
• Do not take short cuts or unnecessary risks and actively work with others to ensure they take due care and do not put themselves or others at risk.
• Ensure all incidents are reported and appropriately investigated in accordance with Company procedure.
• As needed, seek advice from HSE representative.

The Maintenance Supervisor is responsible to ensure that all maintenance and repairs of equipment are performed in a safe and efficient manner. The position is responsible for all drilling equipment pertaining to the drilling of the well. The position supervises onsite maintenance personnel to ensure that proper planning and scheduling of pre-determined maintenance is completed accordingly, including the availability of required parts.

Essential Functions:

• Provide visible leadership with a Total Ownership attitude.
• Enforce, clarify, and follow Company policies, standards, and procedures while promoting operational excellence through procedural discipline.
• Delegate work effectively with a clear definition of requirements and expectations while ensuring the safety of those working under direct supervision.
• Coordinates with Rig Superintendent and Preventative Maintenance Coordinator on the maintenance, repair and refurbishment of equipment.
• Create applicable maintenance procedures that promote defect-free maintenance work quality.
• Responsible for reviewing, evaluating and maintaining maintenance schedules for equipment.
• Foresee potential equipment malfunctions or failures and performs required repairs, adjustments or modification to resolve the problem.
• Enters maintenance and repair data into a Maintenance management system (MMS)
• Provide onsite assistance and guidance to maintenance personnel with trouble shooting issues and repair.
• Monitor oil sample results and ensure recommendations are implemented onsite and reported accordingly.
• Track non-destructive testing and major maintenance to be performed at pre-determined intervals.
• Ensure third party contractor’s work meets the quality, cost and safety standards required by the company.
• Collaborate with maintenance team to schedule staffing and resources for the most effective productivity and timely completion of maintenance. Provide technical support for maintenance systems questions and problems.
• Support the HSE objective of no injuries, accidents or harm to the environment as it relates to all maintenance processes, procedures, and policies.
• Comply with platform emergency response plan or station bills during emergencies and/ or drills.
• Ensure Parker Drilling’s Competency program – Authorized to Operate (ATO) and Approved Competent Operator (ACO) are applied and followed.
• Ensure Client competency is applied and followed
• Understand LO/TO and Permit to Work procedures.
• Maintain and update asset tags for onsite equipment.
• Maintain an adequate amount of spare parts are on hand at all times.
• Read and analyze electrical/mechanical drawings, schematics and equipment manuals.
• Perform annual assessments to evaluate performance, skills, qualifications and abilities of maintenance personnel.
• Perform additional duties, responsibilities, and special projects as may be directed.

·        Ensure project goes according to plan and scope of supply

·        Create approval and working documents & other material needed

·        Prepare analysis drawing based on ship structure drawing

·        Communicate with project managers, development team and another department in Company

·        Communicate with shipyard/owner in project related topic

·        Assist sales team as technical advisor in related

·        Solve site engineering related issues

DESKRIPSI PEKERJAAN

1. Memberikan pelayanan service yang baik terhadap pelanggan mulai dari reservasi sampai pasca service sesuai dengan kebutuhan.

2. Memeriksa, menganalisa, merekomendasi dan menjelaskan tentang hasil pemeriksaan kendaraan perihal perawatan dan perbaikan kendaraan kepada pelanggan.

3. Menjalin komunikasi dan interaksi yang baik terhadap pelanggan untuk memasarkan jasa yang di tawarkan bengkel sesuai dengan ketentuan yang berlaku.

• Receiving order from customer
• Process the order from customer though manual/VIPS/SIPS/TRIM/D2Comm
• Confirm delivery schedule to customer
• Monitoring order status on production
• Arrange delivery/shipment
• Update delivery/shipment status to customer
• Process any complain from customer relating the order process

Primary Responsibilities:

• Establish and maintain seamless co-ordination & co-operation with all departments  to ensure maximum cooperation, productivity, morale and guest service.
• Provide effective support to the team to enable them to deliver effective and efficient services.
• Respond to customer queries by resolving issues in a timely and efficient manner to ensure customer satisfaction.
• Motivate and develop staff to ensure smooth functioning of the department.

• Ensure that the team is trained for all safety provisions.
• Ensure optimal, cost effective use of the resources and educate the team on the same.
• Check and ensure that the temperature of cold stores, public areas etc. are maintained as per the specifications.
• Check and ensure the working condition of fire detectors, fire fighting systems, transformers, electrical systems, etc.
• Coordinate with other departments for regular servicing and testing of equipment.
• Check and ensure that proper safety measures have been adhered to and also ensure maintenance of all fire fighting equipment.
• Ensure that all the first aid kits are available for use in their proper places.
• To supervise the operations of Air-conditioning plant, boilers, pumps etc.
• Ensure that desired level of water is maintained in water storage tanks.
• Ensure correct maintenance of all equipment in conjunction with the other user departments & stay abreast of technological advances in surveillance & safety equipment.

- Min S1 from Electrical Engineering or related major

- Good in English (both speaking & writing)

- Having experience in the same field min 2 years with administrative work exposure

- Good in Microsoft Office/ Google Workspace

- Have experience in handling MV/HV Electricity

- Can work with auto CAD and read electrical drawing

- Ability to perform electricity load and capacity planning and calculation

1. Customer Support

• Respond to customer inquiries promptly and professionally via phone, email, chat, or in-person.
• Provide accurate information about products, services, and policies.
• Assist customers with placing orders, processing returns, and handling any issues related to their accounts and orders.
• Resolve customer complaints and concerns in a timely and satisfactory manner.
• Investigate and troubleshoot issues, escalating complex problems to higher-level support as needed.

1. Strategy Development

• Identify opportunities for improvement in customer service processes and systems.
• Develop and implement strategies to enhance the customer experience and streamline service operations.
• Analyze customer feedback and service metrics to inform project initiatives and decision-making.
• Ensure all interactions align with company standards and contribute to a positive customer experience.
• Ensure customer service standard operating procedures are updated and maintained

      3. Project Management

• Lead and manage customer service projects from inception to completion, including planning, execution, monitoring, and reporting.
• Develop detailed project plans, including timelines, resource allocation, and risk management strategies.
• Coordinate with cross-functional teams to ensure project objectives are met on time

     4. Collaboration:

• Share knowledge and best practices with colleagues to enhance team performance and service quality.
• Foster a collaborative environment and encourage team members to contribute ideas and solutions.

Deskripsi Pekerjaan

1. Menjawab panggilan telepon dan email dari pelanggan

2. Membantu pelanggan dengan pertanyaan tentang produk, status pesanan, dan pertanyaan umum lainnya

3. Menyelesaikan keluhan dan masalah pelanggan dengan cepat dan profesional

4. Mempertahankan sikap positif, empatik, dan profesional terhadap pelanggan

5. Memproses pesanan, pengembalian, dan penukaran dengan akurat

6. Menyimpan catatan rinci tentang interaksi dan transaksi pelanggan

7. Bekerja sama dengan anggota tim untuk memberikan layanan pelanggan yang luar biasa

8. Mengikuti kebijakan dan prosedur perusahaan