• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• pengumpulan sampel beton
• pengujian kekuatan tekan
• analisis komposisi material beton.

• Melakukan pengecekan check sheet dari bagian produksi
• Melakukan repair barang

Responsibilities :

1. Recommend adjustments to assembly or production processes.
2. Ensure that products are checked according to standards and report to the direct superior if any product discrepancies are found.
3. Inspect, test, or measure manufactured materials or products. Accept or reject finished goods.
4. Inspect product samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and checking functionality.
5. Check incoming and outgoing goods. Day-to-day inspection of incoming, processed, and outgoing products.
6. Remove all products and materials that fail to meet specifications. Determine the cause of product defects and rework.
7. Check that assembly or production lines comply with standard procedures. Comply with legal requirements.
8. Review blueprints and specifications to compare to manufactured items.
9. Record inspection results by completing reports, summarizing rework and waste, and entering data into a quality database.
10. Report inspection results (incoming, Process, and Outgoing) via WA and Checksheet on the same day.
11. Monitor the safety of equipment use and discard any that do not meet requirements.
12. Assists in the development of test methods and inspection plans.
13. Keeps measurement equipment operating accurately by following calibration requirements and calling for repairs
14. Participate in creating IK and OPL for critical products and critical processes.

Kualifikasi :

-Pria/Wanita

-Usia Maksimal 30 Tahun

-Memiliki Pengalaman 2 Tahun Sebagai Internal Auditor Training/Relevan

-Mengerti ISO

-Diutamakan Memiliki Sertifikat ISO Terakreditasi Dari Lembaga Pelatihan

-Dapat Bergabung Secepatnya

Quality Staff (Quality Assurance/Quality Control) 

Mendukung Head of Quality dalam melakukan pengawasan dan tanggung jawab untuk memonitor Quality Department Performance: Penyusunan produk defect termasuk laporan tindakan perbaikan/pencegahan kepada Pelanggan, penyempurnaan rencana sistem Quality Control/ Quality Assurance untuk menjamin kepuasan Pelanggan melalui kualitas produk, Klaim Pelanggan, menindaklanjuti dan berkoordinasi untuk penolakan dari inspeksi pengiriman, penanganan Kontrol Pemasok, dll 

Tugas Pekerjaan:

• Mempersiapkan Audit Eksternal/Internal (Audit ISO/Audit Pelanggan/Audit Perusahaan Grup)
• Melakukan verifikasi klaim pelanggan barang dikembalikan, menyediakan & membantu produksi dalam Kualitas Produk
• Memantau umpan balik kualitas produk bersama dengan tim produksi untuk menjaga kualitasnya
• Memantau dan memverifikasi keluhan pelanggan untuk menganalisis akar penyebab peningkatan kualitas
• Melakukan uji coba untuk sampel baru atau pemasok baru untuk memenuhi spesifikasi kualitas
• Mengembangkan SOP, WI untuk peningkatan proses terkait kualitas dan pengetahuan standar untuk produk baru
• Mengembangkan dan menetapkan spesifikasi kualitas untuk produk
• Mengawasi kualitas lini produksi.
• Menganalisis masalah kualitas yang ditemukan di lapangan.
• Berkoordinasi dengan departemen terkait mengenai masalah kualitas yang ada.
• Melaksanakan dan memantau hasil keputusan terhadap kualitas hasil produksi
• Buat rencana aksi untuk menghilangkan masalah – PICA (Continual Improvement)
• Menyiapkan laporan dan menandatangani dokumen sesuai prosedur yang ada
• Membuat laporan kualitas mingguan/bulanan

Persyaratan:

• Kandidat harus memiliki setidaknya Gelar Sarjana di Teknik Metalurgi, Teknik Industri, Teknik Mesin atau terkait dari universitas terkemuka.
• Setidaknya 3 Tahun pengalaman kerja di bidang terkait diperlukan untuk posisi ini.
• Memiliki keahlian di bidang teknik mesin terutama dalam sistem otomasi, desain bagian/mekanisme bergerak kecil, robotika presisi tinggi, proses manufaktur, dan mekatronik.
• Akurat, perhatian terhadap detail, bijaksana, dan cepat belajar adalah suatu keharusan.
• Memiliki keterampilan interpersonal, kepemimpinan, dan resolusi konflik yang sangat baik.
• Memiliki kreativitas, logika, visi, dan keterampilan pemecahan masalah yang luar biasa.
• Memiliki kemampuan komunikasi yang baik dalam bahasa Inggris baik lisan maupun tulisan.
• Bersedia bekerja di Tangerang, Banten

Pertanyaan dari perusahaan

• Memastikan kualitas barang produksi sesuai standar perusahaan.
• Merekomendasikan pengolahan ulang produk-produk yang memiliki kualitas rendah.
• Memastikan dokumentasi inspeksi dan tes produk perusahaan.
• Bertanggung jawab terhadap pembukuan personal QC.

Penanggung Jawab Line Roda 2

Analisa & Report Claim Customer

Handling perencanaan produksi untuk part New Model

Pembuatan dan Kontrol Dokumen

·        Ensure project goes according to plan and scope of supply

·        Create approval and working documents & other material needed

·        Prepare analysis drawing based on ship structure drawing

·        Communicate with project managers, development team and another department in Company

·        Communicate with shipyard/owner in project related topic

·        Assist sales team as technical advisor in related

·        Solve site engineering related issues

Primary Responsibilities:

• Establish and maintain seamless co-ordination & co-operation with all departments  to ensure maximum cooperation, productivity, morale and guest service.
• Provide effective support to the team to enable them to deliver effective and efficient services.
• Respond to customer queries by resolving issues in a timely and efficient manner to ensure customer satisfaction.
• Motivate and develop staff to ensure smooth functioning of the department.

• Ensure that the team is trained for all safety provisions.
• Ensure optimal, cost effective use of the resources and educate the team on the same.
• Check and ensure that the temperature of cold stores, public areas etc. are maintained as per the specifications.
• Check and ensure the working condition of fire detectors, fire fighting systems, transformers, electrical systems, etc.
• Coordinate with other departments for regular servicing and testing of equipment.
• Check and ensure that proper safety measures have been adhered to and also ensure maintenance of all fire fighting equipment.
• Ensure that all the first aid kits are available for use in their proper places.
• To supervise the operations of Air-conditioning plant, boilers, pumps etc.
• Ensure that desired level of water is maintained in water storage tanks.
• Ensure correct maintenance of all equipment in conjunction with the other user departments & stay abreast of technological advances in surveillance & safety equipment.

Responsibilities :

• Write efficient, reusable, and testable code following best practices and coding standards

• Participate in the development lifecycle, including requirements analysis, testing, deployment, and monitoring

• Make sure the data platforms and processes are running well both in data collection, integration and processing

• Monitor and manage data quality processes and data integrations

• Create back end application services

• Troubleshooting technical issues and/or help in technical improvement

• Document data operations and monitoring solutions in clear, concise guides

• Support end-to-end Project Deployments as required by business needs

• Work with the team professionals to set detail specifications for new applications or features

• Perform unit and integration testing before launch

• Work on cross-functional teams to troubleshoot and solve complex problems

• Providing technical support of Bosch Rexroth IoT Solutions.
• Analyzing the gap of technical requirement from customer.
• Working closely with international team for troubleshooting and technical support activity.
• Working hands-on with BR IoT kit to develop Industry 4.0 PoC Project.
• Working collaboratively with the team for marketing and media activity.
• Providing Technical training of Bosch Rexroth IoT Solution 

PT Sentratek Adiprestasi adalah Perusahaan di bidang industri heavy-duty yang mendalami alat penanganan mekanis untuk memindahkan barang dalam jumlah besar atau biasa disebut dengan conveying system (sistem pengangkutan). Sudah lebih dari 35 tahun Perusahaan kami berkembang dan mengalami peningkatan yang signifikan. Guna memenuhi kepuasan pelanggan dan memastikan kualitas yang stabil kami mencari kandidat yang berkompeten untuk bergabung bersama kami.

Tanggung Jawab

1. Mampu melakukan presentasi product maupun project.
2. Aktif melakukan customer visit untuk mencari tahu kebutuhan customer, mencari data dan membina hubungan yang mendalam.
3. Melakukan kegiatan sales mulai dari penawaran, proses marketing, tender (Mengetahui doc CSMS), dan penjualan.
4. Mampu menganalisa pasar.
5. Dapat membuat rencana kerja dengan Baik.
6. Teliti, Jujur, Semangat tinggi & Disiplin.
7. Mengikuti Perkembangan Teknologi Marketing.
8. PENEMPATAN JAKARTA

PT Sentratek Adiprestasi adalah Perusahaan di bidang industri heavy-duty yang mendalami alat penanganan mekanis untuk memindahkan barang dalam jumlah besar atau biasa disebut dengan conveying system (sistem pengangkutan). Sudah lebih dari 35 tahun Perusahaan kami berkembang dan mengalami peningkatan yang signifikan. Guna memenuhi kepuasan pelanggan dan memastikan kualitas yang stabil kami mencari kandidat yang berkompeten untuk bergabung bersama kami.

Tanggung Jawab

1. Mampu melakukan presentasi product maupun project.
2. Aktif melakukan customer visit untuk mencari tahu kebutuhan customer, mencari data dan membina hubungan yang mendalam.
3. Melakukan kegiatan sales mulai dari penawaran, proses marketing, tender (Mengetahui doc CSMS), dan penjualan.
4. Mampu menganalisa pasar.
5. Dapat membuat rencana kerja dengan Baik.
6. Teliti, Jujur, Semangat tinggi & Disiplin.
7. Mengikuti Perkembangan Teknologi Marketing.
8. PENEMPATAN SURABAYA.

• Setting and achieving sales goals.
• Looking for a new leads from existing and new potential customer according to the Product portfolio
• Plan detailed and provide comprehensive technical presentation to the customer
• Generating high-quality sales leads, following up after initial contact, securing and renewing orders, completing sales and arranging deliveries.
• Researching, developing and modifying products to meet customer’s technical requirements and needs.
• Help customer who have problem with installed product and recommending improved machinery.
• Soliciting and logging client feedback and evaluating the data to create new sales and marketing strategies to target customer.
• Identifying areas for improvement and communicating the issued for possible solution.

• Memantau, menganalisis, meneliti dan menguji perkembangan seluruh produk yang diproduksi.
• Melakukan monitoring proses pembuatan produk.
• Melakukan verifikasi kualitas produk.
• Memastikan barang yang diproduksi memiliki kualitas yang memenuhi standar perusahaan.

• Minimal lulusan SMA/SMK
• Memiliki pengalaman kerja di bidang manufaktur minimal 1 tahun (pengalaman di
• Bisa menggunakan alat ukur
• Good attitude, jujur, pekerja keras dan bersedia bekerja dalam tekanan
• Bersedia bekerja sistem shift